Upozornění: Text přílohy byl získán strojově a nemusí přesně odpovídat originálu. Zejména u strojově nečitelných smluv, kde jsme použili OCR. originál smlouvy stáhnete odsud
- - Rotavapor® R-1OO
BUBHI Technical data sheet
The Rotavapor® R—fOO is a high—quality rotary evaporator to meet the essential needs in clas—
sical laboratory applications. It is capable of a manually adjustable rotation speed of 20 to 280
rpm and equipped with an action jack lift for manual lifting of the evaporating flask. Included is
the selected condenser, 1 L receiving and evaporating flasks and a vapor duct. All accessories
are included for out of the box usage.
Q
Scope of delivery
All models are delivered ready to use and are complete of:
Components Fiotavapor® Rotavapor® Rotavapor®
Rotavapor® R—1OO with glass system
Heating Bath B—1OO assembly without
Condenser (according to order code) 1
Vapor duct (with Combi—Clip) 1 glass
Vacuum seal (KD22) assembly 1
Evaporating flask (1 liter) 1
Receiving flask (1 liter) 1
Flyer "List of solvents"
Set of required cooling and vacuum hoses 1
Power cable
Interface l—1OO (with power adapter)
Vacuum Pump V—1OO
Recirculating Chiller F—1OO / F—105
(*according to Oder code)
Order code
Choose the configuration according to your needs:
Rotavapor® with glass assembly
Glass assemly
V Vertical
C Cold trap
Standard joint
1 SJ 29/32
2 SJ 24/40
Protective coating
0 Without
1 Safety coating
Voltage
1 220 — 240 V
2 100 — 120 V
Fiotavapor® without glass assembly Fiotavapor® R—fOO, w/o glass, 220 — 240 V
IIIIIIflII” Fiotavapor® R—fOO, w/o glass, 100 — 120 V
Fiotavapor® R—fOO, w/o heating bath,
w/o glass, 100 — 240 V*
* without power adapter
Fiotavapor® Systems
The rotary evaporator system R—f OO meets the essential needs in laboratory evaporation. It is bundled with the
Vacuum Pump V—fOO regulated by the Interface H 00 and can optionally include the Recirculating Chiller F—f 00
or F—f 05. All accessories and tubes are included for out of the box usage.
Glass assemly
V Vertical
C Cold trap
Standard joint
1 SJ 29/32
2 SJ 24/40
Protective coating
0 Without
1 Safety coating
Recirculating Chiller
0 Without
f F—fOO, fix to 0C
2 F—fO5, 5 to 25 0C
VoHage
f 220—24OV
2 fOO—f2OV
Description of glass assemblies
Abbr. Type / application Cooling
V
Vertical condenser surface area
C For standard applications. The most common condenser. No top hole. 1460 cm2
Dry ice condenser 500 cm2
For distillation of solvents with low boiling points. No cooling water is necessary.
Dimensions Dimensions (W x H x D)
Rotavapor® R—100 with condenser (V or C), 617 x 898 x 502 mm
with heating bath
Rotavapor® R—100 without condenser, 480 x 626 x 502 mm
with heating bath
Technical data Fiotavapor® R—100 (incl. Heating Bath 8—100)
18 — 19 kg
Weight (depending on glass assembly)
Operating voltage 24 V
Frequency DC
Power consumption
30 W, connected to Heating Bath B—100
Protection class
IP21
Angle adjustable 0 — 35 °
Stroke distance 150 mm (+ 100 mm extendable)
Rotation speed 20 — 280 rpm
50 — 4000 mL
Flask size range
3 kg
Maximum flask capacity
Approval CE
Dimension (WXHXD) Heating Bath 8—100
Weight
Operation voltage (according to order code) 285 x 219 x 326 mm
Frequency
Power consumption 4.0 kg
Heating Power
100 — 120 V or 220 — 240 V
Protection class 50/60 Hz
1700 W
Controlled temperature range 1300 W
IP21
Maximum flask size 20 — 95 CC
4000 mL
Temperature regulation accuracy i 2 °C
Approval CE
Special features Flotavapor® R—lOO
Lift extension Up to 100 mm
allows use of bump traps and glass extenders
Stop—end position limiter
Multifunctional Combi—Clip Manually adjustable
prevents glass breakage and damage to bath pan
Temperature display
Over—temperature protection Tool for evaporating flask fixation and removal as
Carry handles
Bath guidance well as vapor duct release
Heating Bath B—lOO
Digital
allows adjusting set temperature and indicates
actual temperature
Power cut off when actual temperature exceeds set
temperature or by rapid temperature increase
Two integrated handles faciliate carry, re—filling and
emptying the heating bath
Integrated in the Rotavapor® base
Allows to easily position the heating bath along
the guidance (sideways) when various evaporating
flasks are used
Complementary products
See respective product brochures and technical data sheets for more information.
R—lOO Pump V—1OO Chiller F—lOO Chiller F—105
R—lOO with l—lOO autonomous
autonomous autonomous manually controlled
regulated regulated
temperature manually
controlled*
*Recirculating Chiller F—105 is switched ON and OFF automatically via Interface l—1OO
Exemplary solution
The following items are listed based on the solution “Rotavapor® Essential”, shown in the “Laboratory Evapora—
tion Solutions” brochure.
Rotavapor® R—100, SJ29/32, V, 220—240V 11100V1021
Interface l—100
Vacuum Pump V—100
Recirculating Chiller F—105
Woulff bottle
Rotavapor accessories
Order number
Heating Bath, B—100, 220—240V 11061895
Heating Bath, B—100, 100—120V 11061894
048052
Protective shield, for Heating bath B—491, B—100 048230
036405
Effective user protection against splashing
Top cover, for Heating bath B—491, B—100
To cover bath when not in use to save energy and to reduce evaporation of heating media
Swimming balls, PP, @10mm (450pcs)
To reduce energy consumption of heating bath and for less evaporation of heat media, for temperatures up
to 100°C
Cooling water valve, 24VAC 031356
031358
Valve opens cooling water feed only during distillation
Waterjet pump, B—764, magnetic valve, FFKM backstroke valve, 24V
Simple principle of vacuum generation, without cooling water valve, only used in combination with a vacuum
controller or interface
Waterjet pump, B—767, magnetic valve (2 pcs), FFKM backstroke valve, 24V 031357
Simple principle of vacuum generation, for pump and cooling water, only used in combination with a vacu—
um controller or interface
Water regulation nozzle, restrictor valve, hose clamp, sieve 011606
040627
Used when tap water is applied as vacuum source, to reduce flow—rate of the water
Stopcock, standard, SJ18.8/38
For aeration of the system
Stopcock, classic, SJ18.8/38 000637
023896
For aeration of the system, less cross—contamination than standard stopcock (040627)
048618
Stopcock, PTFE, SJ18.8/38 11059916
11055312
For applications when grease should be avoided, used instead of standard stopcock (040627), no feeding
possible
Flask holder, ring, non—slippery EPDM
Keeps flasks stable on the lab bench, for round—botton flasks (50 — 5000 mL)
Set of flask holders, non—slippery EPDM (5pcs)
Keeps flasks stable on the lab bench, for round—botton flasks (50 — 5000 mL)
Power adapter, 24VDC, operating range 100—240V, frequency 50/60HZ
For operation of Fiotavapor® without heating bath
Lab grease, tube, grease Glisseal 40 blue (60g) Order number
048197
To grease the joints
052893
Condenser holder, holding rod, screw (2pcs), rubber band
017622
Recommended to fasten condenser onto Flotavapor® R—100, for V— and C—glass assembly 027277
027900
Tubing, for vacuum, silicone rubber, @6/16mm, red, per m 004113
004133
Tubing, for vacuum, PTFE (rigid), @8/10mm, white/transparent, per m 000646
Tubing, for vacuum, PEP, @6/8mm, transparent, per m
Tubing, for cooling media, Nyflex, PVC—P, @8/14mm, transparent, per m
Tubing, for cooling media, silicone rubber, @6/9mm, transaprent, per m
Tubing, for feed, PTFE, @4.7/5.5mm, 330mm
Rotavapor® wear parts deernwhber
000636
Vacuum seal, KD22, PTFE—composite 11056622
Vacuum seal, KD22, PTFE—compensite, FDA—compliant sealing material 018916
Hose barb, bent, GL14, silicone seal 037287
Set of hose barbs, bent, GL14, silicone seal, incl. cap nut (4pcs each) 040295
Set of hose barbs, bent, GL14, FPM seal, incl. cap nut (4pcs each) 043129
Set of hose barbs, bent, GL14, EPDM seal, incl. cap nut (4pcs each) 037642
Set of hose barbs, straight, GL14, silicone seal, incl. cap nut (4pcs each) 040296
Set of hose barbs, straight, GL14, FPM seal, incl. cap nut (4pcs each) 043128
Set of hose barbs, straight, GL14, EPDM seal, incl. cap nut (4pcs each) 041939
Set of hose barbs, bent (1pc), straight (1pc), GL14, silicone seal, incl. cap nut (2pcs) 038000
Set of hose barbs, bent (4pcs), straight (2pcs), GL14, silicone seal, incl. cap nut (6pcs) 041987
Set of hose barbs, bent, GL14, silicone seal (3pcs each) 041999
Set of cap nuts, screw cap with hole, incl. FEP seal (10pcs) 041956
Set of cap nuts, screw cap with hole, GL14 (10pcs) 040624
Set of cap nuts, screw cap without hole, GL14 (5pcs) 040023
Set of seals, for hose barb, GL14, silicone, red (20pcs) 040040
Set of seals, for hose barb, GL14, FPM, green (10pcs)* 040029
Set of seals, for hose barb, GL14, EPDM, black (10pcs)* 038225
Seal GL14, for cap nut, GL14, FEP
* FPM and EPDM seals are more chemical resistant than silicone seals
Rotavapor®glass assemblies
The following items have to be purchased in addition to a system that is ordered without glass.
All glass assemblies include a liter receiving flask, required hoses and a ball joint clamp. Evaporating flask,
vacuum seal, vapor duct (KD22) and condenser holder are not included.
Glass assembly V complete Order number
Glass assembly V complete, P+G safety coating 11057056
11057057
Receiving flask with P+G safety coating
040640
Glass assembly 0 complete 040642
Glass assembly 0 complete, P+G safety coating
Receiving flask with P+G—LT safety coating
Fiotavapor® glass accessories SJ 29/32 SJ 24/40
Vapor duct compatible with KD22 032339 032341
Additional glassware
Additional glassware like evaporating flasks, drying flasks, receiving flasks, beaker flasks, Reitmeyer adapters
(bump traps) and distillation spiders can be found in the “Laboratory Evaporation Glassware” brochure.
/
notice
without
change
to
subject
are
data
Technial
/
A
1410 901
en ISO
Shet Systems
Data
www.buchi.com/laboratory—evaporation Quality in your hands R—10 Quality