Upozornění: Text přílohy byl získán strojově a nemusí přesně odpovídat originálu. Zejména u strojově nečitelných smluv, kde jsme použili OCR. originál smlouvy stáhnete odsud
Data sheet 6EP1333-1LB00
SITOP PSU100L 24 V/5 A
SITOP PSU100L 24 V/5 A Stabilized power supply input: 120/230 V
AC, output: 24 V DC/5 A
Input 1-phase AC
Input Set by means of selector switch on the device
● Note
Supply voltage 120 V
● 1 at AC Rated value 230 V
● 2 at AC Rated value
Input voltage 93 ... 132 V
● 1 at AC 187 ... 264 V
● 2 at AC No
Wide-range input 2.3 × Vin rated, 1.3 ms
Overvoltage resistance at Vin = 93/187 V
Mains buffering 20 ms; at Vin = 93/187 V
Mains buffering at Iout rated, min. 50 Hz
Rated line frequency 1 60 Hz
Rated line frequency 2 47 ... 63 Hz
Rated line range
Input current 2.1 A
● at rated input voltage 120 V 1.15 A
● at rated input voltage 230 V
10/10/2019 Subject to change without notice
6EP1333-1LB00 © Copyright Siemens
Page 1/4
Switch-on current limiting (+25 °C), max. 32 A
Duration of inrush current limiting at 25 °C
3 ms
● typical 0.8 A²·s
I²t, max. T 3,15 A/250 V (not accessible)
Built-in incoming fuse Recommended miniature circuit breaker: from 6 A characteristic C
Protection in the mains power input (IEC 898)
Controlled, isolated DC voltage
Output 24 V
Output 3%
Rated voltage Vout DC 0.1 %
Total tolerance, static ± 0.5 %
Static mains compensation, approx. 150 mV
Static load balancing, approx. 50 mV
Residual ripple peak-peak, max. 240 mV
Residual ripple peak-peak, typ. 150 mV
Spikes peak-peak, max. (bandwidth: 20 MHz) 22.8 ... 26.4 V
Spikes peak-peak, typ. (bandwidth: 20 MHz) Yes
Adjustment range via potentiometer
Product function Output voltage adjustable Green LED for 24 V OK
Output voltage setting Overshoot of Vout approx. 4 %
Status display 1.5 s
On/off behavior 130 ms
Startup delay, max. 5A
Voltage rise, typ. 0 ... 5 A
Rated current value Iout rated +45 ... +60 °C: Derating 2%/K
Current range 120 W
● Note Yes
Supplied active power typical 2
Parallel switching for enhanced performance
Numbers of parallel switchable units for enhanced 86 %
performance 17 W
Efficiency 0.3 %
Efficiency at Vout rated, Iout rated, approx.
Power loss at Vout rated, Iout rated, approx. 2%
Closed-loop control 0.4 ms
Dynamic mains compensation (Vin rated ±15 %), 0.4 ms
max.
Dynamic load smoothing (Iout: 10/90/10 %), Uout ± < 33 V
typ.
Load step setting time 10 to 90%, typ.
Load step setting time 90 to 10%, typ.
Protection and monitoring
Output overvoltage protection
6EP1333-1LB00 10/10/2019 Subject to change without notice
Page 2/4 © Copyright Siemens
Current limitation, typ. 5.25 A
Property of the output Short-circuit proof Yes
Short-circuit protection Constant current characteristic
Enduring short circuit current RMS value
8A
● typical -
Overload/short-circuit indicator
Yes
Safety Safety extra-low output voltage Uout acc. to EN 60950-1 and EN
Primary/secondary isolation 50178
Galvanic isolation Class I
Protection class 3.5 mA
Leakage current 0.4 mA
IP20
● maximum
● typical Yes
Degree of protection (EN 60529) cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259
-
Approvals -
CE mark Yes
UL/cUL (CSA) approval -
Explosion protection
FM approval EN 55022 Class A
CB approval -
Marine approval EN 61000-6-2
EMC 0 ... 60 °C
Emitted interference with natural convection
Supply harmonics limitation -40 ... +85 °C
Noise immunity -40 ... +85 °C
Climate class 3K3, 5 … 95% no condensation
environmental conditions
Ambient temperature screw-type terminals
● during operation
— Note L, N, PE: 1 screw terminal each for 0.5 ... 2.5 mm² single-
● during transport core/finely stranded
● during storage +, -: 2 screw terminals each for 0.5 ... 2.5 mm²
Humidity class according to EN 60721 -
50 mm
Mechanics
Connection technology 10/10/2019 Subject to change without notice
Connections © Copyright Siemens
● Supply input
● Output
● Auxiliary
Width of the enclosure
6EP1333-1LB00
Page 3/4
Height of the enclosure 125 mm
Depth of the enclosure 120 mm
Required spacing
50 mm
● top 50 mm
● bottom 0 mm
● left 0 mm
● right 0.5 kg
Weight, approx. Yes
Product feature of the enclosure housing for side-by-
side mounting Snaps onto DIN rail EN 60715 35x7.5/15
Installation 3 076 166 h
MTBF at 40 °C Specifications at rated input voltage and ambient temperature +25
Other information °C (unless otherwise specified)
6EP1333-1LB00 10/10/2019 Subject to change without notice
Page 4/4 © Copyright Siemens