Upozornění: Text přílohy byl získán strojově a nemusí přesně odpovídat originálu. Zejména u strojově nečitelných smluv, kde jsme použili OCR. originál smlouvy stáhnete odsud
Product specification
Humidity chamber
HCP105
Active humidity control creates a
controlled environment for accelerated
life tests and 85/85 tests.
On this page, you can find all the essential technical data on the Memmert humidity chamber HCP. Our customer
relations team will be pleased to help if you want further information. If you should require a customised special
solution, please contact our technical specialists at myAtmoSAFE@memmert.com.
Page 1/4 | 21.12.2021 Memmert GmbH + Co. KG | Tel. +49 (0) 9122/925-0 | E-Mail info@memmert.com | 2
Memmert Humidity chamber HCP105 - en
Temperature +7 above ambient temperature up to +90 °C
+18 to +90 °C
Working-temperature range 0.1 °C
Setting temperature range
Setting accuracy 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an
temperature error
Temperature sensor
Humidity 20 to 95 % rh and rh-Off
0.5 % rh
Humidity Control
Setting range active
humidity control
Setting accuracy humidity
Control technology TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition
TFT-colour displays.
ControlCOCKPIT German, English, Spanish, French, Polish, Czech, Hungarian
temperature (Celsius or Fahrenheit), relative humidity, programme time, time zones,
Language setting summertime/wintertime
adjustable parameters Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
the process time does not start until the set temperature is reached
Timer three freely selectable values each, temperature and humidity
Function SetpointWAIT
Calibration
Communication Ethernet LAN, USB
programme stored in case of power failure
Interface AtmoCONTROL software on a USB stick for programming, managing and transferring programmes
Documentation via Ethernet interface or USB port
Programming
Safety additionally integrated over- and undertemperature monitor "ASF", automatically following the setpoint
value at a preset tolerance range, alarm in case of over- or undertemperature, heating is switched off
AutoSAFETY in case of overtemperature
Autodiagnostic system integral fault diagnostics for temperature and humidity control
Alarm
visual and acoustic
Page 2/4 | 21.12.2021 Memmert GmbH + Co. KG | Tel. +49 (0) 9122/925-0 | E-Mail info@memmert.com | 2
Memmert Humidity chamber HCP105 - en
Heating concept large-area multi-function heating system on four sides with additional door and back heating to avoid
condensation
6 sides
Standard equipment Works calibration certificate (measuring point chamber centre) at 60 °C with 75 % rh
Entry port (silicone), 40 mm clear diameter, for introducing connections, moisture tight, can be closed
Works calibration certificate by silicone stopper, at the back, centre left
Entry port Additional heated inner glass door
fully insulated stainless steel door with 2-point locking (compression door lock)
Door 2 perforated stainless steel shelf/shelves
Door
Internals
Stainless steel interior w(A) x h(B) x d(C): 560 x 480 x 400 mm (d less 35 mm for fan)
W.-St. 1.4301 (ASTM 304)
Dimensions 107 l
Interior 6
Volume 90 kg
Max. number of internals 15 kg
Max. loading of chamber
Max. loading per internal
Textured stainless steel casing
Dimensions w(D) x h(E) x d(F): 719 x 850 x 591 mm (d +56mm door handle)
Electrical data 230 V, 50/60 Hz
approx. 1720 W
Voltage
Electrical load 115 V, 50/60 Hz
approx. 1720 W
Voltage
Electrical load
Ambient conditions 10 °C to 30 °C
The distance between the wall and the rear of the appliance must be at least 15 cm. The clearance
Ambient temperature from the ceiling must not be less than 20 cm and the side clearance from walls or nearby appliances
Set Up must not be less than 5 cm.
max. 70 %, non-condensing
Humidity rh max. 2,000 m above sea level
Altitude of installation II
Overvoltage category 2
Pollution degree
Page 3/4 | 21.12.2021 Memmert GmbH + Co. KG | Tel. +49 (0) 9122/925-0 | E-Mail info@memmert.com | 2
Memmert Humidity chamber HCP105 - en
Packing/shipping data The appliances must be transported upright
8419 8998
Transport information Federal Republic of Germany
Customs tariff number DE 66812464
Country of origin w x h x d: 800 x 1030 x 800 mm
WEEE-Reg.-No.
Dimensions approx incl. approx. 75 kg
carton approx. 100 kg
Net weight
Gross weight carton
Temperature Humidity Working Range HCP
Not all climate chambers are the same. The
humidity content of the chamber load, the
ambient conditions and the respective
temperature-humidity working range are decisive
factors in the selection of the right appliance. In
the adjacent diagram, you can see the possible
temperature/humidity combinations for our
humidity chambers HCP. Within the respective
temperature-humidity range, permanent operation
is possible (at an ambient temperature of 22 °C ±
3 K, relative humidity < 50 %). Condensation may
occur in the threshold range. To which extent
depends on the humidity content of the chamber
load and the ambient conditions.
Standard units are safety-approved and bear the test marks
Page 4/4 | 21.12.2021 Memmert GmbH + Co. KG | Tel. +49 (0) 9122/925-0 | E-Mail info@memmert.com | 2