Upozornění: Text přílohy byl získán strojově a nemusí přesně odpovídat originálu. Zejména u strojově nečitelných smluv, kde jsme použili OCR. originál smlouvy stáhnete odsud
(
P EVROPSKÁ UNIE
Evropské strukturální a investiční fondy
Operační pragram Výzkum, vývoj a vzdělávání
KUPNÍ SMLOUVA smlouva č. 4 4, POE
Tato kupní smlouva (dále jen „Smlouva“) byla uzavřena v souladu s ustanovením S 2079 a násl.
zákona č. 89/2012 Sb., občanský zákoník (dále jen „Občanský zákoník“) níže uvedeného dne, měsíce
a roku mezi:
(I) — Fyzikální ústav AV ČR,v. v. i.,
sesídlem: © Na Slovance 2, Praha 8, PSČ: 182 21,
IČO: 68378271,
zastoupen: prof Jan Řídký, DrSc. — ředitel
(dále jen „Kupujíci“); a
(2) MIT, spol. s r. 0.,
se sídlem: Praha 4, Klánova 71/56, PSČ 14700,
IČO: 46348395,
zastoupen: Martin Moser, jednatel
(dále jen „Prodávající“).
(Kupujicí a Prodávající dále společně jen jako „Strany“ a každý samostatně též jako „Strana“.)
VZHLEDEM K TOMU, ŽE
(A) | Kupující je veřejným zadavatelem a příjemcem dotace Ministerstva školství, mládeže a
tělovýchovy | České | republiky na projekt „ELI: © EXTREME | LIGHT
INFRASTRUCTURE - fáze 2“, reg. číslo projektu CZ.02.1.01/0.0/0.0/15. 008/0000162
(dále jen „Projektť“), a to v rámci Operačního programu Výzkum, vývoj a vzdělávání.
(B) | Za účelem úspěšné realizace Projektu je nezbytné pořídit i Předměty koupě (jak je tento
pojem definován níže), a to vsouladu se zákonem č. 137/2006 Sb., o veřejných
zakázkách (dále jen „Zákon o veřejných znkázkách“), a Pravidly pro výběr
dodavatelů v rámci Operačního programu Výzkum a vývoj pro inovace.
(C) | Prodávající má zájem Předměty koupě Kupujícímu za úplatu poskytnout.
(D) | Nabídka Prodávajícího podaná pro veřejnou zakázku „Vybavení experimentálních
laboratoří — optomechanika a malá optika pro femtosekundovou spektroskopii“ jež
byla uveřejněna ve Věstníku veřejných zakázek pod evidenčním číslem 635198 a jejímž
cílem bylo obstarat Předměty koupě (dále jen „Veřejná zakázka“), byla vybrána
Kupujícím jako nejvhodnější.
BYLO DOHODNUTO NÁSLEDUJÍCÍ:
1.1
1.3
n
3.1
EVROPSKA UNIE
Evropské strukturální a investiční fondy
Operační program Výzkum, vývoj a vzdětávání
PŘEDMĚT SMLOUVY
Touto Smlouvou se Prodávající zavazuje odevzdat Kupujícímu věcí, které: budou
splňovat parametry, vlastnosti a požadavky uvedené v Příloze 1 (Technická specifikace)
této Smlouvy a v Příloze 2 (Cenová tabulka a technický popis Prodávajícího) této
Smlouvy (včetně požadovaného počtu kusů) (dále jen „Předměty koupě“), převést na
Kupujícího vlastnické právo k Předmětům koupě a Kupující se zavazuje Předměty koupě
převzít a zaplatit Prodávajícímu Kupní cenu (jak je tento pojem definován níže), a to vše
za podmínek uvedených v této Smlouvě.
Touto Smlouvou se Prodávající dále zavazuje vykonat následující činnosti (dále jen
„Související činnosti“):
a) ověřit, že Předměty koupě splňují veškeré požadavky stanovené v této Smlouvě
a jsou plně funkční; a
b) dopravit Předměty koupě do mista plnění.
Prodávající se zavazuje Kupujícímu, že pokud ke splnění požadavků Kupujícího
vyplývajících z této Smlouvy budou potřebné i další dodávky a činnosti výslovně
neuvedené v této Smlouvě, Prodávající takové dodávky a činnosti na své náklady obstará
či provede, aniž by tím byla dotčena výše Kupní ceny.
Prodávající je oprávněn dodat i jiné věci než ty, které jsou popsány v Příloze 2 (Cenová
tabulka a technický popis Prodávajícího), a to za předpokladu, že budou splňovat
požadavky uvedené v Příloze 1 (Technická specifikace) a Kupující vysloví s dodáním
těchto nových věcí souhlas.
MÍSTO PLNĚNÍ
Místo plnění je na adrese Za Radnicí 835, Dolní Břežany, Středočeský kraj nebo jiná
adresa v obci Dolní Břežany sdělená Kupujícím po podpisu této Smlouvy.
ČAS PLNĚNÍ
Prodávající je povinen Předměty koupě odevzdat a vykonat Související činnosti do 4
týdnů ode dne účinnosti této Smlouvy s výjimkou spektrometru („spectrometer 200-1080
nm“ - položka 141 v Příloze 1), který je Prodávající povinen odevzdat do 8 týdnů ode
dne účinnosti této Smlouvy. Čas plnění je určen v prospěch Kupujícího. Kupující je
oprávněn dobu plnění podle své potřeby prodioužit, a to až o dalších 8 týdnů, jsou-li pro
to důležité důvody (např. nemožnost převzít Předměty koupě z důvodu nepřipravenosti
prostor) nebo pokud Kupující nemá pro Předměty koupě okamžité využití. Kupující je
oprávněn podle předchozí věty prodloužit dobu plnění i jen pro Jednotlivé Předměty
koupě. Prodávající je oprávněn Předměty koupě dodat dříve, vysloví-li s tím Kupující
souhlas.
Prodávající je oprávněn dodat Předměty koupě a vykonat Související činnosti v
pracovních dnech vdobě od 8:30 do 17:00 hodin, nedohodnou-li se Strany jinak.
Konkrétní pracovní dny budou určeny na základě dohody Stran. Nedohodnou-li se
24 =
51
52
53
54
5.5
5.6
EVROPSKÁ UNIE
Evropské strukturální a investiční fondy
Operační program Výzkum, vývoj a vzdělávání
Strany na konkrétních pracovních dnech, ve kterých má být plněno, je Prodávající
povinen plnit v poslední den lhůty pro včasné splnění této Smlouvy a Kupující je
povinen poskytnout Prodávajícímu za tímto účelem nezbytnou součinnost.
VLASTNICKÉ PRÁVO
Vlastnické právo k Předmětům koupě nabývá Kupující podpisem Předávacího protokolu
(ak je tento pojem definován niže) oběma Stranami.
CENA A PLATEBNÍ PODMÍNKY
Celková kupní cena je uvedena v tabulce, která tvoří Přílohu 2 (Cenová tabulka a
technický popis Prodávajícího) této Smlouvy (dále jen „Kupní cena“).
Kupní cena je nepřekročitelná a zahrnuje veškeré náklady Prodávajícího spojené s
plněním této Smlouvy. Kupní cena zahrnuje zejména veškeré náklady Prodávajícího na
odevzdání Předmětů koupě a vykonání Souvisejících činností, náklady na autorská
práva, licence, pojištění, daně, záruční servis a jakékoliv další náklady spojené s plněním
této Smlouvy.
Kupní cena může být změněna pouze pokud:
a) vobdobí od uzavření Smlouvy do podpisu Předávacího protokolu dojde ke
změně sazeb DPH, nebo pokud
b) bude provedena v souladu se Zákonem o veřejných zakázkách.
Kupní cena bude Kupujícím uhrazena v české měně na základě faktury, a to
bezhotovostní platbou na účet Prodávajícího uvedený na faktuře. Jsou-li Předměty koupě
dodávány v několika dodávkách, jsou Prodávající a Kupující povinní podepsat Předávací
protokol při každé jednotlivé dodávce. Prodávající je oprávněn vystavit fakturu až po
podpisu Předávacího protokolu. Kopie Předávacího protokolu musí být přílohou faktury.
Kupující je povinen řádně vystavené faktury uhradit do 30 dnů ode dne jejich doručení.
Faktura se považuje za uhrazenou dnem odepsání fakturované částky z účtu Kupujícího
ve prospěch účtu Prodávajícího.
Faktura vystavená Prodávajícím musí obsahovat náležitosti vyžadované právními
předpisy České republiky pro daňový doklad. Faktury vystavené Prodávajícím podle této
Smlouvy budou obsahovat zejména tyto údaje:
a) firma (název) a sídlo Kupujícího,
b) daňové identifikační číslo Kupujícího,
c) firma (název) a sídlo Prodávajícího,
d) daňové identifikační číslo Prodávajícího,
e) evidenční číslo daňového dokladu,
57
5.8
6.1
6.2
6.3
6.4
EVROPSKÁ UNIE
Evropské strukturální a investiční fondy
Operační program Výzkum, vývoj a vzdělávání
1) rozsah a předmět plnění (včetně odkazu na tuto Smlouvu),
g) den vystavení daňového dokladu,
h) datum uskutečnění plnění,
i) Kupní cenu,
j) základ DPH,
k) sazbu DPH,
b výši DPH v české měně,
m) evidenční číslo této Smlouvy, které Kupující sdělí na žádost Prodávajícímu před
vystavením faktury,
n) prohlášení, že plnění je poskytováno pro účely projektu „ELI fáze 2“, reg. číslo
projektu CZ.02.1.01/0.0/0.0/15. 008/0000162,
a dále musejí být v souladu s dohodami o zamezení dvojího zdanění, budou-li se tyto
dohody na konkrétní případ vztahovat.
V případě, že faktura nebude mít výše uvedené náležitosti, je Kupující oprávněn ji vrátit
ve lhůtě splatnosti zpět Prodávajícímu, aniž se tak dostane do prodlení. Lhůta splatnosti
počíná běžet znovu od opětovného doručení náležitě doplněné či opravené faktury
Kupujícímu.
Poslední faktura každého kalendářního roku musí být Prodávajícím doručena do
podatelny Kupujícího nejpozději do 15. prosince daného kalendářního roku.
POVINNOSTI PRODÁVAJÍCÍHO
Prodávající je povinen zajistit, že Předměty koupě a Souvisejicí činnosti budou v souladu
s touto Smlouvou včetně všech jejích příloh a aplikovatelnými právními (např.
bezpečnostními), technickými a kvalitativními normami.
Při plnění této Smlouvy postupuje Prodávající samostatně, nestanoví-li tato Smlouva
Jinak. Obdrží-li Prodávající od Kupujícího pokyny, je povinen se takovými pokyny řídit,
pokud nejsou v rozporu stouto Smlouvou či obecně závaznými právními předpisy.
Pokud Prodávající zjistí nebo při vynaložení odborné péče měl zjistit, že pokyny jsou
z jakéhokoliv důvodu nevhodné nebo protiprávní nebo v rozporu s touto Smlouvou, je
povinen Kupujícího upozornit.
Není-li v této Smlouvě stanoveno jinak, tak veškeré věci potřebné k plnění této Smlouvy
je povinen opatřit Prodávající,
Prodávající bere na vědomí skutečnost, že Kupující nemá skladovací prostory pro
uložení originálních obalů od Předmětu koupě a z tohoto důvodu není povinen tyto obaly
skladovat. Absence originálních obalů nemůže být důvodem pro odmítnutí odstranit
vady Předmětu koupě.
73
8.2
8.3
8.4
8.5
8.6
bud
EVROPSKÁ UNIE
Evropské strukturální a investiční fondy
Operační program Výzkum, vývoj s vzdělávání
PŘEDÁNÍ PŘEDMĚTU KOUPĚ
Předání a převzetí Předmětů koupě se uskuteční na základě předávacího protokolu (dále
jen „Předávací protokol“).
Nepředloží-li Prodávající Kupujícímu všechny výše uvedené dokumenty nebo
neprovede-li Prodávající řádně veškeré Související činnosti nebo neodpovídají-li zcela
Předměty koupě této Smlouvě, je Kupující oprávněn odmítnout převzetí Předmětů
koupě. V takovém případě je Prodávající povinen zjednat nápravu ve lhůtě tří (3)
pracovních dnů, nedohodnou-li se Strany jinak. Kupující je oprávněn (nikoli povinen)
převzít Předměty koupě podle svého uvážení i přes výše uvedené nedostatky, zejména
nebráni-li tyto nedostatky řádnému užívání Předmětů koupě. V takovém případě uvedou
Prodávající a Kupující v Předávacím protokolu nedostatky, včetně způsobu a termínu
jejich odstranění (nápravy). Nedojde-li v Předávacím protokolu k dohodě mezi Stranami
o termínu odstranění nedostatků, je Prodávající povinen tyto nedostatky odstranit do tři
(3) pracovních dnů.
Strany vylučují použití ustanovení $ 2126 Občanského zákoníku.
ZÁRUKA
Prodávající deklaruje záruku za jakost Předmětů koupě po dobu 3 měsíců. Pokud bude
na záručním listu či jiném obdobném dokumentu uvedena záruční doba delší, platí tato
delší záruční doba.
Záruční doba počíná běžet dne podpisu Předávacího protokolu oběma Stranami. Jsou-li
v Předávacím protokolu uvedeny nedostatky, záruční doba počíná běžet dnem, který
následuje po dni, ve kterém byl poslední nedostatek odstraněn.
Prodávající se zavazuje, že vady, které se vyskytnou v záruční době, bezplatně a ve lhůtě
2 měsíců odstraní.
Zjistí-li Kupující vadu Předmětů koupě v době trvání záruční doby, oznámí tuto
skutečnost bez zbytečného odkladu Prodávajícímu. Vady lze oznámit nejpozději v
poslední den záruční doby.
Kupující oznamuje vady písemně nebo prostřednictvím emailové zprávy. Prodávající
bude přijímat oznámení vad na emailové adrese servis()mit-laser.cz.
Prodávající je povinen vadu odstranit ve lhůtách podle této Smlouvy, i když považuje
oznámení o vadách za neoprávněné. V takovém případě je Prodávající oprávněn
požadovat po Kupujícím úhradu nákladů na odstranění takové vady. Vznikne-li mezi
Stranami spor o tom, zda je vada oprávněná či nikoliv, nechá Kupující zpracovat
znalecký posudek, který posoudí, zda bylo oznámení vady oprávněné či nikoliv.
V případě, že bude oznámení vad označeno znalcem za oprávněné, ponese Prodávající i
náklady na vyhotovení znaleckého posudku. Prokáže-li se, že Kupující oznámil vadu
neoprávněně, je Kupující povinen uhradit Prodávajícímu účelně a prokazatelně
vynaložené náklady na odstranění vady.
8.7
8.8
9.1
9.2
10.
10.1
10.3
10.4
il
EVROPSKÁ UNIE G
Evropská strukturální a investiční fondy T
Operační program Výzkum, vývoj a vzdělávání
O odstranění oznámené vady sepíší Strany protokol, ve kterém popiší vadu a potvrdí její
odstranění. O dobu, která uplyne ode dne oznámení vady do dne odstranění vady, se
prodlužuje záruční doba.
V případě, že Prodávající neodstraní vadu ve stanovené lhůtě nebo pokud Prodávající
odmítne vadu odstranit, je Kupující oprávněn nechat vadu odstranit na své náklady a
Prodávající je povinen uhradit Kupujícímu náklady na odstranění vady, a to do 10 dnů
poté, co jej k tomu Kupující vyzve.
Strany vylučují použití ustanovení $ 1925 Občanského zákoníku.
PROHLÁŠENÍ PRODÁVAJÍCÍHO
Prodávající prohlašuje a zaručuje Kupujícímu, že
a) disponuje veškerými odbornými předpoklady potřebnými pro řádné plnění této
Smlouvy;
b) je k plnění této Smlouvy oprávněn; a
c) na straně Prodávajícího neexistují žádné překážky, které by mu bránily tuto
Smlouvu řádně splnit.
Prodávající prohlašuje a zaručuje Kupujícímu, že je-li zaměstnavatelem zaměstnávajícím
více než 50 % zaměstnanců na zřízených nebo vymezených chráněných pracovních
místech (ve smyslu $ 75 zákona č. 435/2004 Sb., o zaměstnanosti), kteří jsou osobami se
zdravotním postižením, tak zajistí, aby plněním poskytnutým podle této Smlouvy
Kupující plnil povinnost ve smyslu ustanovení $ 81 odst. 2 písm. b) zákona č. 435/2004
Sb., o zaměstnanosti. Na vyžádání Kupujícího je povinen Prodávající Kupujícímu
skutečnosti uvedené v předchozí větě prokázat.
SANKCE
V případě, že se Prodávající ocitne v prodlení s dodáním Předmětů koupě, tj. poruší
povinnost poskytnout plnění podle této Smlouvy řádně a včas a takové prodlení bude
trvat déle jak 4 týdny, uhradí Kupujícímu smluvní pokutu ve výši 0,05 % z Kupní ceny
za každý započatý den prodlení s dodáním Předmětů koupě.
V případě prodlení Prodávajícího s odstraněním vady, uhradi Prodávající Kupujícímu
smluvní pokutu ve výši 0,05% z Kupní ceny Předmětů koupě za každý i započatý den
prodlení.
Smluvní pokuty je Prodávající povinen uhradit do patnácti (15) dnů ode dne, kdy mu
Kupující oznámil, že nároky ze smluvních pokut uplatňuje. Uhrazením smluvní pokuty
není dotčeno právo Kupujícího na náhradu případné škody, a to i v rozsahu, ve kterém
tato škoda bude převyšovat smluvní pokutu.
Celková výše smluvních pokut podle této Smlouvy nepřesáhne 20 % Kupní ceny.
10.5
10.6
II.
11.1
13.
EVROPSKÁ UNIE
Evropské strukturální a investiční fondy
Operační program Výzkum, vývoj a vzdělávání
Kupující je oprávněn jednostranně započíst pohledávky ze smluvních pokut proti
pohledávce Prodávajícího na zaplacení Kupní ceny.
Strany vylučují použití ustanovení $ 2050 Občanského zákoníku.
ODSTOUPENÍ
Kupující je oprávněn od této Smlouvy odstoupit bez jakýchkoliv sankcí, nastane-li
některá z níže uvedených skutečností:
a) výdaje nebo část výdajů, které na základě této Smlouvy vzniknou, poskytovatel
dotace pro Projekt případně jiný kontrolní subjekt, označí za nezpůsobilé;
b) Prodávající se ocitne v prodlení s dodáním Předmětů koupě a takové prodlení
bude trvat déle než 2 týdny;
c) Kupujícímu bude odňata finanční dotace k realizaci Projektu;
d) proti Prodávajícímu bude zahájeno insolvenční řízení; nebo
e) vyjde-li najevo, že Prodávající uvedl ve své nabídce pro Veřejnou zakázku
informace nebo doklady, které neodpovídají skutečnosti a které měly nebo
mohly mít vliv na výsledek výběrového řízení, které vedlo k uzavření této
Smlouvy.
Prodávající je oprávněn od této Smlouvy odstoupit, poruší-li Kupující tuto Smlouvu
podstatným způsobem.
ZVLÁŠTNÍ USTANOVENÍ
Prodávající bere na vědomí, že je osobou povinnou spolupůsobit při výkonu finanční
kontroly ve smyslu $ 2 písm. e) zákona č. 320/2001 Sb., o finanční kontrole ve veřejné
správě a o změně některých zákonů a zavazuje se poskytnout řídícímu orgánu
Operačního programu či jiným kontrolním orgánům přístup ke všem částem nabídek,
smluv a dalších dokumentů, které souvisejí s právním vztahem založeným touto
Smlouvou. Tato povinnost se vztahuje také na dokumenty, které podléhají ochraně podle
zvláštních právních předpisů (obchodní tajemství, utajované skutečnosti apod.) za
předpokladu, že ze strany kontrolního orgánu budou splněny požadavky kladené
právními předpisy. Prodávající je povinen zajistit, aby kontrole ve výše
uvedeném rozsahu byli povinní se podrobit i všichni jeho případní subdodavatelé.
Možnost kontroly musí být zachována až do roku 2026.
MLČENLIVOST
Strany se zavazující zachovávat mlčenlivost o skutečnostech, které se dozvědí v
souvislosti s touto Smlouvou a jejím plnění a jejichž vyzrazení by mohlo druhé Straně
způsobit újmu. Tímto nejsou dotčeny povinnosti Kupujícího vyplývající z právních
předpisů.
EVROPSKÁ UNIE
Evropské strukturální a investiční fondy
Operační program Výzkum, vývoj a vzdělávání
14. ZÁSTUPCI SMLUVNÍCH STRAN
14.1 Pro komunikaci s Kupujícím v souvislosti s plněním této Smlouvy ustanovil Prodávající
následující zástupce:
Ve věcech technických:
Jméno: Thomas Meier
E-mail: meierAmit-laser.cz
Tel.: +420 777 708 931
Ve věcech smluvních:
Jméno: Martin Moser
E-mail: moserAmit-laser.cz
Tel.: © +420 777 708 930
15. ZÁVĚREČNÁ USTANOVENÍ
15.1 Tato Smlouva se řídi právním řádem České republiky, zejména Občanským zákonikem.
15.2 Veškeré spory vzniklé z této Smlouvy či z právních vztahů sní souvisejících budou
Strany řešit jednáním. V případě, že nebude možné Spor urovnat jednáním ve lhůtě
šedesáti (60) dnů, bude takový spor rozhodnut na návrh jedné ze Stran příslušným
soudem v České republice.
15.3 Prodávající na sebe bere nebezpečí změny okolnosti ve smyslu ustanovení $ 1765
Občanského zákoníku.
15.4 Prodávající bere na vědomí, že Kupující není ve vztahu k předmětu této Smlouvy
podnikatelem, a ani se předmět této Smlouvy netýká podnikatelské činnosti Kupujícího.
15.5 Prodávající není oprávněn započíst jakoukoliv svou pohledávku, ani jakoukoliv
pohledávku svého poddlužníka, za Kupujícím proti pohledávce Kupujícího za
Prodávajícím. Prodávající není oprávněn postoupit pohledávku, která mu vznikne na
základě této Smlouvy nebo v souvislosti sní na třetí osobu. Prodávající není oprávněn
postoupit práva a povinnosti z této Smlouvy ani z její části třetí osobě.
15.6 | Veškeré změny či doplnění této Smlouvy lze učinit pouze písemně.
15.7 Ukáže-li se, že některé ustanovení této Smlouvy je nebo se stalo neplatným či
neúčinným, zavazují se Strany změnit tuto Smlouvu tak, aby neplatné či neúčinné
ustanovení bylo nahrazeno novým ustanovením, které je platné a účinné a přitom
obsahově v maximální možné míře odpovídá původnímu neplatnému či neúčinnému
ustanovení,
EVROPSKÁ UNIE
Evropské strukturální a investiční fondy
Operační program Výzkum, vývoj a vzdělávání
15.8. Poruší-li Strana povinnost podle této Smlouvy či může-li a má-li o takovém porušení
vědět, oznámí to bez zbytečného odkladu druhé Straně a upozorní ji na možné následky
porušení takové povinnosti.
15.9. Tato Smlouva se vyhotovuje ve čtyřech (4) stejnopisech, přičemž každá ze Stran obdrží
po dvou stejnopisech.
15.10. Nedilnou součástí této Smlouvy je i Příloha | (Technická specifikace) a Příloha 2
(Cenová tabulka a technický popis Prodávajícího). Je-li v Příloze 1 (Technická
specifikace) použit výraz „Contracting Authority“ je tím myšlen Kupující a je-li použit
výraz „Supplier/supplier“, je tím myšlen Prodávající.
15.11 Tato smlouva nabývá platnosti a účinnosti dnem jejiho podpisu oběma Stranami.
NA DŮKAZ ČEHOŽ připojují Strany vlastnoruční podpisy:
Kupující
u Ak
Jméno: 08 Jan "Řídký, DrSc.
Funkce: ředitel rikal ut Ja
veřejná výzkumná nstiluce
Datum: -5 10, 206 18221 Praha B, Na Slovance 2
1
Prodávající
Boo Lo c p o
Jméno: C Mark RN s.alů= MT A jat mochna
Funkce: | © datel
MIT ep. 340, Klánova 56, 147 00 Praha 4
Datum: ZS .3. 290/6
Institute of Physics ASCR, v. v. I.
e Na Slovance 2
| | 182 21 Prague 8
] eli-cz©efzu.cz
. www.eli-beams.eu
beamlines
Confidentiality s - Restricted for TC ID / Revision |00128658/C
Level internal use
Document Status Document Released Document No. N/A
WBS code 5.3.3
PBS code E.E1.OPP.O0.1.2
Reguirements Specification Document (RSD)
[RSD of product category A]
RA4 Small optics and Optomechanics
TP16 117
Keywords
N/A
Position Name
gay Lead P4 Jakob Andreasson
person Group Leader R
Prepared by Researcher RA4 Miroslav Kloz
© Fvzi kální U stav project supported by: Htortan deěoR FUND ry zeeras
Akademie věd ČR. v.v.. INVESTING IN YOUR FUTURE OP Resezech and
Content
KLNR L ETO CDU CET CO TO PRK o 3
A5 (PVT 00T oo oa ano oba DOHOD Por U ooodboDnoDan ooo ano o nanmonfáho 3
PSÍ n ooo oo 0 ozon ká arco ní MAN JE noconáno OHPoVonotK U Lo 3
1.3: Terms, Definitions and AbbreviationS...2.....:s14Jiussianéssée snévéc6 o sívíva PK KVA 6 KoVA 08 odiv oe ndá605 054 3
2. General Functional, Performance and Design reguirementS ................%%**««+<<<<<s:ssrs+* 4
3. Environmental reguirementsS ...............0...4..4+:4r.1.7r100000 ron K KKK K KOREK KRK KO KPK K KOK Kn 4
o ENV T 4
5-Safety ReguirementS../.........o.cr:crstorseeersaueadebeaoasaoaa one e one no oa la Te dlka ono ROL Kokos re rorvs ve rov dk en B)
6. OualitýjReGUIrements Su 0ts0oeu He varedéča o a0(e ké 40 SB VOL L KVK AKASA KA A oa KUKUA VA KORTE VA VAKV AA ddb6 din A6 0ě 5
6.1 GeneraliOualitýzRegůirements SK B A P P pe eba s 5
6.27 SpecificOúality"Reguirementst,121..1...:;s.sr1szsusas eur re ira naTosads iočaševtávaavrvruamnononrnat nm 5
ZA AED PO ODO ODO OO LE O PRO O TE P OTP OL OOP OLO 6
7.1. Technical specification (Table 1).......................*+.*....*c001000010r07000 00000000 K0 0 R K P 6
© Fyzikální ústav [its | eli »
1. Introduction
1.1. Purpose
This Reguirements Specification Document (RSD) lists the technical reguirements and
constraints on products applying in the RA4 research program at ELI Beamlines. This can lead
to the identification of product interfaces with the ELI science based technology and ELI
building facility. This RSD also acts as the parent document for the technical reguirements that
need to be addressed in lower level design description documents.
1.2. Scope
This RSD contains all of the technical reguirements: functional, performance and design
reguirements, delivery, safety and guality reguirements for the following products: Optics,
optomechanics, electromechanics (PBS: E.E1.OPP.O0O.1.2). These products are products
Category A.
Category A is an Off-the-shelf Products without necessity of modifications and necessity to be
subjected to a verification programme (review of design, inspection and testing) for ELI
applications by the actual project specifications. All verification activities performing by a
supplier shall be executed in accordance with the supplier's plan of outgoing inspection and
tests. Internal Acceptance Procedure of the products Category A shall be established and
applied before the product implementation (operation phase).
1.3. Terms, Definitions and Abbreviations
For the purpose of this document, the following abbreviated terms are applied:
Abbreviation Meaning
AOI Angle Of Incidence
AR Anti-reflex (coating)
BBO Barium Boron Oxide
CA Contracting Authority
CWL Central Wavelength
EFL Effective Focal Length
ELI Extreme Light Infrastructure
FWHM Full width half maximum
GDD Group Delay Dispersion
HR High Reflectance
IR Infrared
ND Neutral Density
NIR Near infrared (750 — 1600 nm)
OAP Off Axis Parabola
OD Optical Density
R Reflectance
RA4 Research activity 4
X Fyzikální ústav ei „M
RFL Reflected Focal! Length
RMS Root Mean Sguared
RSD Reguirements Specification Document
s s (perpendicular), p (paraliel) polarization to the plane of
: incidence
SI International System
TM Transmission
TPI Threads Per Inch
UV Ultra Violet
UVFS UV fused silica
VIS Visible light (400-750 nm)
A Lambda, wavelength, for surface flatness specification egual
633 nm
For the purpose of this document, the following definitions apply:
« Aninch (abbrev. in or “") is a non-SI unit of length, which is egual to 25.4 mm.
2. General
REO-015905/A
Functional, Performance and Design reguirements
The parameters of all supplied products shall correspond to the reguirements
given in the Annex I, Table 1.
3. Environmental reguirements
REO-015906/A
REO-015907/A
4. Delivery
REO-015919/A
REO-015908/A
The Supplier and Contracting Authority shall agree on the cleaning method to
clean devices without decreasing the devices' performance and to avoid
contamination of clean space.
NOTE: The cleaning methods may use high temperatures (baking out), high
gas flow (dry air) and specialised chemical cleaning liguids (alcohol, Isopropyl
alcohol, demineralised water).
Al products shall fulfil criteria for cleanrooms up to class 7 of the ČSN EN ISO
14644 norm and maintain the reguired parameters in an environment
stabilized to a set temperature within £0.5 deg. C.
The transportation to the final destination shall be conducted by the supplier.
All products shall be delivered in protective package preventing damage.
X Fyzikální ústav ana eli.
5. Safety Reguirements
REO-015909/A
The supplier shali supply a Declaration of Conformity for each product type if
the appropriate legislation determines the supplier's obligation to have a
Declaration of Conformity for the purposes of a Device sale in the Czech
Republic.
In such a case the Declaration of Conformity shall comply with Act No.
22/1997 Coli., as amended.
6. Ouality Reguirements
6.1. General Ouality Reguirements
REO-015910/A
REO-015912/A
REO-015917/A
REGO-015913/A
The supplier shall provide the Product User Manual as part of the delivered
Device. The Manual shall include the instructions and descriptions regarding
the following procedures:
«* description of transport;
* handling;
* storage;
* installation and calibration (if reguired, see REG-015917/A);
* safe operation and maintenance procedures.
Supplier shall provide information on executed of outgoing check of the
products. At least this information shall comprise declaration of conformity
with technical reguirements defined by the product RSD and completeness of
the product.
The supplier shall supply Calibration Certificate which shall establish:
* the relation between guantity values with measurement uncertainties
provided by measurement standards and the corresponding indications
with associated measurement uncertainties;
«* the relation for obtaining a measurement result from an indication (if
reguired).
NOTE: This reguirement is for items of category Measuring Eguipment and
Devices only (see also ISO/IEC GUIDE 99:2007, 2.39).
The supplier shall establish and maintain a non-conformance control system
compatible with CSN EN ISO 9001: 2010 edition 2.
6.2. Specific Ouality Reguirements
REO-015920/A
Š Fyzikální ústav
The supplier shall guarantee that all products will be free from defects for a
minimum period of 90 days after their acceptance.
Akademie věd ČR, v.v. W
dj ' bela)m?!\es
7.Annex I
7.1. Technical specification (Table 1)
mirror 2" dielectric
mirror diameter 2", dielectric, AOI 45 deg, HR and low GDD: 720 - 880 nm, R >= 99%
1 ha (s+p)/2, surface flatness A/10, surface guality 20-10 scratch-dig, wedge angle < 3 arc
: min, laser damage threshold > 50 mi/cm2 for 50 fs, 800 nm.
: ho : mirror diameter 2", dielectric, AOl 0 deg, HR and low GDD: 720 - 880 nm, R >= 99%,
mirror 2" dielectric 0 : ; A
2 Je surface flatness A/10, surface guality 20-10 scratch-dig, wedge angle < 3 arc min, laser
: damage threshold > 50 mJ/cm2 for 50 fs, 800 nm.
h = : mirror diameter 1", dielectric, AOI 45 deg, HR and low GDD: 720 - 880 nm, R >= 99.7%
mirror 1" dielectric : :
3 Asus (s+p)/2, surface flatness A/10, surface guality 20-10 scratch-dig, wedge angle < 3 arc
: min, laser damage threshold > 50 mJ/cm2 for 50 fs, 800 nm, p-polarization.
i ře: i mirror diameter 1", dielectric, AOI 0 deg, HR and low GDD: 720 - 880 nm, R >= 99.7%,
mirror 1" dielectric 0 : : i
4 a surface flatness A/10, surface guality 20-10 scratch-dig, wedge angle < 3 arc min, laser
= damage threshold > 50 mJ/cm2 for 50 fs, 800 nm.
mirror diameter 2"“, protected gold coating, surface flatness A/10, surface guality 40-
5 mirror 2" gold 20 scratch-dig, wedge angle < 5 arc min, laser damage threshold > 1 J/cm2 at 1064
nm, 50 Hz, 11 nsec.
kop kb mirror diameter 1", siver+dielectric, AOI 45 deg, HR and low GDD: 750 - 1000 nm, Rs
6 va >= 99 %, surface flatness A/10, surface guality 20-10 scratch-dig, wedge angle < 3 arc
min, laser damage threshold > 50 mJ/cm2 for 50 fs, 800 nm.
mirror diameter 2"“, protected silver coating, surface flatness A/10, surface guality 40-
7 mirror 2" silver 20 scratch-dig, wedge angle < 5 arc min, laser damage threshold > 1.8 J/cm2
at 1064 nm, 50 Hz, 11 nsec.
mirror 1inch diameter, protected gold coating, substrate: fused silica, surface flatness:
8 mirror 1" gold M10 ©633 nm, surface guality: 40-20 scratch-dig, wedge angle < 5 arc min, damage
threshold: 1 J/cm2 at 1064 nm, 50 Hz, 11 ns.
mora saguare mirror, sguare, 50.8 x 50.8 mm, protected gold coating, surface flatness A/8, surface
9 old s 1 guality 40-20 scratch-dig, wedge angle < 3 arc min, damage threshold: > 2 J/cm2 at
5 1064 nm, 10 ns, 10 Hz.
nen mirror, sguare, 50.8 x 50.8 mm, UV enhanced Aluminum, R> 90 % for 250-450 nm,
10 i i surface flatness A/8, surface guality 40-20 scratch-dig, wedge angle < 3 arc min,
aluminum
damage threshold > 0.3 J/cm2 at 355 nm, 10 ns, 10 Hz.
mirror diameter 1 inch or 25.4 mm, protected silver coating, substrate: fused silica,
11 | mirror 1" silver wedge < 5 min, surface flatness: A/10, surface guality 10-5 scratch-dig, low GDD: 600 -
1000 nm.
. : mirror, diameter 1 inch, UV enhanced Aluminum, R>90% for 250-450 nm, surface
mirror 1" UV enh. . : :
12 flatness A/10, surface guality 40-20 scratch-dig, wedge angle < 3 arc min, damage
aluminum
threshold > 0.3 J/cm2 at 355 nm, 10 ns, 10 Hz.
©
Fyzikální ústav
1)
Akademie věd ČR, v.v. l.
el
beamlines
concave focusing
mirror 2 inch diameter, protected gold coating, concave, effective focal length “1000
13 | mirror 2" gold,f= mm, surface flatness A/4, surface guality 60-40, damage threshold 0.8 J/cm2 at 1064
1000mm nm, 10 ns.
concave focusing mirror 2 inch diameter, protected silver coating, concave, effective focal length *1000
14 | mirror 2" silver, f = mm, surface flatness A/4, surface guality 60-40, damage threshold 0.8J/cm2 at 1064
1000mm nm, 10 ns.
concave focusing mirror 1" diameter, protected silver coating, concave, effective focal length *250 mm,
15 | mirror 1" silver, f = surface flatness A/4, surface guality 60-40, damage threshold 0.8 J/cm2 at 1064 nm,
250mm 10 ns.
concave focusing mirror 1" diameter, protected silver coating, concave, effective focal length "400 mm,
16 | mirror 1" silver, f = surface flatness A/4, surface guality 60-40, damage threshold 0.8 J/cm2 at 1064 nm,
400mm 10 ns.
concave focusing mirror 1" diameter, protected silver coating, concave, effective focal length "750 mm,
17 | mirror 1" silver, f = surface flatness A/4, surface guality 60-40, damage threshold 0.8 J/cm2 at 1064 nm,
750mm 10 ns.
concave focusing mirror 1" diameter, protected silver coating, concave, effective focal length *1000
18 | mirror 1" silver, f = mm, surface flatness A/4, surface guality 60-40, damage threshold 0.8 J/cm2 at 1064
1000mm nm, 10 ns.
concave focusing mirror 1" diameter, protected silver coating, concave, effective focal length "1500
19 | mirror 1" silver, f = mm, surface flatness A/4, surface guality 60-40, damage threshold 0.81/cm2 at 1064
1500mm nm, 10 ns.
concave focusing mirror 1" diameter, protected silver coating, concave, effective focal length *“2000
20 | mirror 1" silver, f = mm, surface flatness A/4, surface guality 60-40, damage threshold 0.8 J/cm2 at 1064
2000mm nm, 10 ns.
concave focusing mirror 2 inch diameter, protected UV enhanced aluminium coating, concave, effective
21 | mirror 2" UV focal length “1000 mm, surface flatness A/4, surface guality 60-40, damage threshold
enhanced aluminium | 0.8J/cm2 at 1064 nm, 10 ns.
“ mirror 2 inch or 50.8 mm diameter, protected silver coating, low GDD: 600-1000 nm,
concave focusing .
22 mirror 2" silver concave, focal length "2000 mm (radius 4000 mm), surface flatness: A/4, surface
auality 10-5 scratch-digs.
: 4 mirror 1 inch diameter, protected silver coating, convex, focal length 1000 mm (radius
convex mirror 1 l =
23 é 2000 mm), surface flatness: A/10, surface guality: 40-20 scratch-dig, damage
silver, f = 1000mm
threshold: 0.25 J/cm2 at 800 nm, 94 fs.
convex mirror 1" UV | mirror 1 inch diameter, UV enhanced aluminum coating, convex, focal length 1000
24 | enhanced aluminium | mm (radius 2000 mm), surface flatness: A/10, surface guality: 40-20 scratch-dig,
f = 1000mm damage threshold: 0.25 J/cm2 at 800 nm, 94 fs.
: ň mirror 1 inch diameter, protected silver coating, convex, focal length 750 mm (radius
convex mirror 1 : :
25 1500 mm), surface flatness: A/10, surface guality: 40-20 scratch-dig, damage
silver f = 750mm
threshold: 0.25 J/cm2 at 800 nm, 94 fs.
»
Fyzikální ústav
1)
Akademie věd ČR. v.v.i.
el
beamlines
convex mirror 1" UV
enhanced
mirror 1 inch diameter, UV enhanced aluminum coating, convex, focal length 750 mm
26 nc (radius 1500 mm), surface fiatness: A/10, surface guality: 40-20 scratch-dig, damage
2 threshold: 0.25 J/cm2 at 800 nm, 94 fs.
750mm
donvek mirror.1 mirror 1 inch diameter, protected silver coating, convex, focal length 500 mm (radius
27 : 1000 mm), surface flatness: A/10, surface guality: 40-20 scratch-dig, damage
silver, f = 500mm
threshold: 0.25 J/cm2 at 800 nm, 94 fs.
. “ mirror 1 inch diameter, protected silver coating, convex, focal length 400 mm (radius
convex mirror 1 : i
28 . 800 mm), surface flatness: A/10, surface guality: 40-20 scratch-dig, damage
silver, f =400mm
threshold: 0.25 J/cm2 at 800nm, 94 fs.
- = mirror 1 inch diameter, protected silver coating, convex, focal length 300 mm (radius
convex mirror 1 ' É
29 i 600 mm), surface flatness: A/10, surface guality: 40-20 scratch-dig, damage
silver, f =300mm
threshold: 0.25 J/cm2 at 800 nm, 94 fs.
i 7 mirror 1 inch diameter, protected silver coating, convex, focal length 200 mm (radius
convex mirror 1 i i
30 i 400 mm), surface flatness: A/10, surface guality: 40-20 scratch-dig, damage
silver, f =200mm
threshold: 0.25 J/cm2 at 800 nm, 94 fs.
, = mirror 1 inch diameter, protected silver coating, convex, focal length 150 mm (radius
convex mirror 1 č č
31 3 300 mm), surface flatness: A/10, surface aguality: 40-20 scratch-dig, damage
silver, f =150mm
threshold: 0.25 J/cm2 at 800 nm, 94 fs.
. n mirror 1 inch diameter, protected silver coating, convex, focal length 100 mm (radius
convex mirror 1 i i
32 i 200 mm), surface flatness: A/10, surface aguality: 40-20 scratch-dig, damage
silver, f =100mm
threshold: 0.25 J/cm2 at 800 nm, 94 fs.
k : : 4 mirror, diameter 75 mm, protected gold coating, concave, f= 500 mm, surface flatness
focusing mirror 3 : :
33 M4, surface guality 40-20 scratch-dig, damage threshold > 2I/cm2 at 1064 nm, 10 ns,
gold, f = 500mm
10 Hz.
focusing mirror 3" mirror, diameter 75 mm, UV enhanced aluminum, concave, f=500 mm, surface
34 | UVenh. Aluminum, f | flatness A/4, surface guality 40-20 scratch-dig, damage threshold > 0.3 J/cm2 at 355
=500mm nm, 10 ns, 10 Hz.
focusin| mirror 2
35 [uv te Fri mirror 2 inch diameter, UV enhance. Al, concave f=200 mm, surface flatness: A/4,
- | surface guality: 40-20 scratch-dig, damage threshold 0.3 J/cm2 at 355 nm, 10 ns.
f= 200mm
focusing mirror 1" j j : :
A aha mirror 1 inch, Protected silver coating, concave f=500 mm, surface flatness: A/4,
= 500mm ; surface guality: 40-20 scratch-dig, damage threshold 0.3 J/cm2 at 355 nm, 10 ns.
focusing mirror 1"
37 uv oa f mirror 1 inch, UV enhanc. Al, concave f=100 mm, surface flatness: A/4, surface guality:
: : 40-20 scratch-dig, damage threshold 0.3 J/cm2 at 355 nm, 10 ns.
=100mm
Pony off-axis parabolic mirror, 1 inch diameter, UV enhanced Al, reflected focal length 2",
38 : off-axis angle 90 deg, surface flatness A/4, surface guality 40-20 scratch-dig, damage
Aluminum, 2" RFL
threshold 0.3 J/cm2 at 355 nm, 10 ns, 10 Hz.
©
Fyzikální ústav
1)
Akademie věd ČR, v.v.l.
eli
beamlines
off-axis parabolic mirror, 1 inch diameter, UV enhanced Al, reflected focal length 6",
39 k A a off-axis angle 90 deg, surface flatness A/4, surface guality 40-20 scratch-dig, damage
: threshold 0.3 J/cm2 at 355 nm, 10 ns, 10 Hz.
OAP 2" silver, 15" off-axis parabolic mirror, 2 inch diameter, silver, reflected focal length 15", off-axis
40 |EFL, 15 deg angle 15 deg, surface flatness A/4, surface guality 40-20 scratch-dig, damage
incidence threshold 0.3 J/cm2 at 355 nm, 10 ns, 10 Hz.
OAP 2" with hole off-axis parabolic mirror with hole paralel with focused beam (3 mm aperture of the
i paralel with focus, hole at the polished surface, 6 mm at back), 2 inch diameter, protected gold, reflected
protected gold, 6" focal length 6", off-axis angle 90 deg, surface flatness A/4, surface guality 40-20
RFL scratch-dig, damage threshold 0.3 J/cm2 at 355 nm, 10 ns, 10 Hz.
OAP 3" with hole off-axis parabolic mirror with hole paralel with focused beam (3 mm aperture of the |
re) paralel with focus, hole at the polished surface, 6 mm at back), 3inch diameter, protected gold, reflected
protected gold, 6" focal length 6", off-axis angle 90 deg, surface flatness A/4, surface guality 40-20
RFL scratch-dig, damage threshold 0.3 J/cm2 at 355 nm, 10 ns, 10 Hz.
OAP 3" with hole off-axis parabolic mirror with hole paralel with focused beam (3 mm aperture of the
A5 paralel with focus, hole at the polished surface, 6 mm at back), 3 inch diameter, protected gold, reflected
protected gold, 9" focal length 9", off-axis angle 90 deg, surface flatness A/4, surface guality 40-20
RFL scratch-dig, damage threshold 0.3 J/cm2 at 355 nm, 10 ns, 10 Hz.
OAP 2" with hole off-axis parabolic mirror with hole paralel with focused beam (3 mm aperture of the
Bi paralel with focus, hole at the polished surface, 6 mm at back), 2 inch diameter, protected gold, reflected
protected gold, 4" focal length 4", off-axis angle 90 deg, surface flatness A/4, surface guality 40-20
RFL scratch-dig, damage threshold 0.3 j/cm2 at 355 nm, 10 ns, 10 Hz.
Variable attenuator | Variable attenuator (waveplate + polarizer), 750 - 850 nm, transmission contrast
45 | (waveplate + mode, attenuation 0.2 - 70 %, clear aperture 15 mm, damage threshold > 100 mi/cm2
polarizer) at 800 nm, 100 fs, 1 kHz.
broadband
He waveplate lambda/2, | achromatic waveplate A/2, 600 - 950 nm, free aperture >= 21 mm, GDD < 150fs42,
near IR, for throughput > 98 %, wavefront distortion < A/10, surface 10-5 scratch-dig.
ultrashort pulses
broadband :
achromatic waveplate A/2, mounted, clear aperture 10 mm, 260 - 410 nm, surface
47 | waveplate lambda/2, E t
ÚV guality: 20-10 scratch-dig, damage threshold > 5 J/cm2 at 10 ns, 10 Hz.
broadband : :
achromatic waveplate A/2, mounted, 1 inch, clear aperture 22.6 mm, 400 - 800 nm,
48 | waveplate lambda/2, ; :
VIS surface guality: 20-10 scratch-dig, damage threshold > 5 J/cm2 at 10 ns, 10 Hz.
ZELENE achromatic waveplate A/2, mounted, 1 inch, clear aperture 22.6 mm, 690 - 1200 nm,
49 | waveplate lambda/2, . I
EHT surface guality: 20-10 scratch-dig, damage threshold > 5 J/cm2 at 10 ns, 10 Hz.
50 broadband polarizer | broadband thin film polarizer 600 - 900 nm, extinction ratio < 2x10A-2, GDD < 150
for fs pulses
fsA2, free aperture 19 mm, mount outer diameter 25 mm.
©
Fyzikální ústav
1)))
Akademle věd ČR, v.v. l.
eli
beamlines
Holographic Wire
KRS-5 Holographic Wire Grid Polarizer, 025 mm, Mounted, extinction better than
51 | Grid Polarizer, 025 ný
1:100, transmission 3 - 30 um > 70 %.
mm, Mounted
Glan-Taylor Design (Air-Spaced Birefringent Crystal Prisms), 10 mm, uncoated,
Glan-Taylor Calcite 4 : j P A p : ) ; -Dre
E ME Wavefront Distortion s A/4 Over Clear Aperture (Excluding Side Ports), extinction 1:
k ofem : "| 100000, 20-10 Scratch-Dig Surface Ouality on Input and Exit Faces (80-50 on Side
Ports).
Wollaston Prism, 20" : i
Běsm Gensratioá Wollaston Prism, 20“ Beam Separation, 190 - 3500 nm Uncoated a-BBO, Separates
53 190- še E : kalí Light into Two Orthogonally Polarized Outputs with a 20" Separation
e.
Uncoated a-BBO :
Glan-Taylor Design (Air-Spaced Birefringent Crystal Prisms), 15 mm, uncoated,
Glan-Taylor Calcite y : 6 : P 6 M : : ao“
sa. |IPolrizerelUnesekéd Wavefront Distortion < A/4 Over Clear Aperture (Excluding Side Ports), extinction 1:
5 ' 7 | 1000000, 20-10 Scratch-Dig Surface Ouality on Input and Exit Faces (80-50 on Side
Ports).
ET Microretarder Depolarizer Array, patterned retarder designed to convert a linearly
55 Depolarsej Ara polarized beam of light into a pseudo-randomly polarized beam, AR coating 350 - 700
s V nm, 20-10 Scratch-Dig Surface Ouality on Input and Exit Faces (80-50 on Side Ports).
> - ultrabroadband wire grid polarizer, operating range: 250 nm - 4 um, extinction: 250
broadband wire grid
56 kry, nm -4 im: >10:1, 300 nm - 4 um: >100:1, 600 nm - 4 um: >1000:1, Clear Aperture:
: (919 mm, Thickness: 3.5 £ 0.1 mm, mount outer diameter 25 mm.
s window 1 inch diameter, 1 mm thick, fused silica, AR coated 650 - 1050 nm, surface
window 1" fused Í : i :
57 silica auality 20-10 scratch-dig, surface flatness: A/4, parallelism < 1 arc min, damage
threshold 7.5 J/cm2 at 810 nm, 10 ns.
58 window 1" fused window 1 inch diameter, 1 mm thick, fused silica, uncoated, surface guality 20-10
silica scratch-dig, surface flatness: A/4, parallelism < 1 arc min.
dou 15 fused window 1 inch diameter, 1 mm thick, fused silica, AR coated 350 - 700 nm, surface
59 silica guality 20-10 scratch-dig, surface flatness: A/4, paralielism < 1 arc min, damage
threshold 7.5 J/cm2 at 532 nm, 10 ns.
i window 1inch diameter, 1mm thick, fused silica, AR coated 1050 - 1700 nm, surface
window 1" fused i i : :
60 silica guality 20-10 scratch-dig, surface flatness: A/4, parallelism < 1 arc min, damage
threshold 7.5 J/cm2 at 1542 nm, 10 ns.
MgF2 window O1inch, 5 mm thick, uncoated, Surface Flatness (© 633 nm) A/8, Clear
61 | window 1" MgF2 ň a (e 1M
Aperture > 90 % Diameter.
62 window 1" CaF2, 5 CaF2 window 1 inch, 5 mm thick, uncoated, Surface Flatness (© 633 nm) A/8, Clear
mm Aperture > 90 % Diameter.
3 window 1" CaF2, 2 CaF2 window Pi inch, 2 mm thick, uncoated, Surface Flatness (© 633 nm) A/8, Clear
mm Aperture > 90 % Diameter.
: k i sapphire window (1 inch, 5 mm thick, uncoated, Surface Flatness (© 633 nm) A/8,
64 | window 1"sapphire
Clear Aperture > 90% Diameter.
©
Fyzikální ústav
1)
Akademie věd ČR, vv..
eli
beamlines
window 1"
Germanium Broadband Precision Window, uncoated, 91 inch, 5 mm thick, Surface
65 | germanium, Á
Flatness (© 633 nm) A, Clear Aperture > 90 % Diameter.
uncoated
window 1" A Y: a A ;
66 o 12 Germanium Broadband Precision Window, AR Coated: 7 - 12 uum, ($1 inch, 5mm thick,
B : Surface Flatness (© 633 nm) A, Clear Aperture > 90 % Diameter.
jum coated
window 1" * u Ů s
67 onanlum 1956 Germanium Broadband Precision Window, AR Coated: 1,9 - 6 um, (1 inch, 5 mm
ě -) thick, Surface Flatness (© 633 nm) A, Clear Aperture > 90 % Diameter.
jum coated
68 | lens 2" f=500mm lens W2 inch, plano-convex, fused silica, focal length *500 mm, uncoated.
69 | lens 2" f=750mm lens 2 inch, plano-convex, fused silica, focal length *750 mm, uncoated.
70 | lens 2" f=1000mm lens W2 inch, plano-convex, fused silica, focal length *1000 mm, uncoated.
p lens d1inch, plano-convex, AR coated 350 - 900 nm, fused silica, ultrathin (central
71 |lens1" f=75mm ,
thickness < 3 mm), focal length 75 mm.
) lens 1" f=100mm, lens W1 inch, plano-convex, AR coated 350 - 900 nm, fused silica, ultrathin (central
extended VIS coated | thickness < 3 mm), focal length 100 mm.
lens W1 inch, plano-convex, AR coated 350 - 900 nm, fused silica, ultrathin (central
73 | lens1" f=200mm * p p J (
thickness < 3 mm), focal length 200 mm.
7a Iléns 1 rao0rm lens 1 inch, plano-convex, AR coated 350 - 900 nm, fused silica, ultrathin, focal length
300 mm.
m lens d1 inch, plano-convex, AR coated 350 - 900 nm, fused silica, ultrathin (central
75 |lens1" f=500mm :
thickness < 3 mm), focal length 500 mm.
lens dM1inch, plano-convex, uncoated, fused silica, focal length 50 mm, Surface
76 | lens 1" f=50mm Flatness (Plano Side) A/2, Spherical Surface Power (Convex Side) 3A/2, Surface
Irregularity (Peak to Valley) A/4.
lens M1 inch, plano-convex, uncoated, fused silica, focal length 75 mm, Surface
77 | lens 1" f=75mm Flatness (Plano Side) A/2, Spherical Surface Power (Convex Side) 3A/2, Surface
Irregularity (Peak to Valley) A/4.
m lens d1 inch, plano-convex, uncoated, fused silica, focal length 100 mm, Surface
lens 1" f=100mm, 1 : a
78 unčosted Flatness (Plano Side) A/2, Spherical Surface Power (Convex Side) 3A/2, Surface
Irregularity (Peak to Valley) A/4.
lens d1 inch, plano-convex, uncoated, fused silica, focal length 200 mm, Surface
79 | lens 1" f=200mm Flatness (Plano Side) A/2, Spherical Surface Power (Convex Side) 3A/2, Surface
Irregularity (Peak to Valley) A/4.
lens d1 inch, plano-convex, uncoated, fused silica, focal length 250 mm, Surface
80 | lens 1" f=250mm Flatness (Plano Side) A/2, Spherical Surface Power (Convex Side) 3A/2, Surface
Irregularity (Peak to Valley) A/4.
lens WM1 inch, plano-convex, uncoated, fused silica, focal length 300 mm, Surface
81 | lens 1" f=300mm Flatness (Plano Side) M2, Spherical Surface Power (Convex Side) 3A/2, Surface
Irregularity (Peak to Valley) M4.
4
Fyzikální ústav PACCN eli „
lens A1 inch, plano-convex, uncoated, fused silica, focal length 500 mm, Surface
82 | lens 1" f=500mm Flatness (Plano Side) A/2, Spherical Surface Power (Convex Side) 3A/2, Surface
Irregularity (Peak to Valley) A/4.
lens 91 inch, plano-convex, 650-1050 nm AR coated, fused silica, focal length 50 mm,
83 | lens 1" f=50mm Surface Flatness (Plano Side) A/2, Spherical Surface Power (Convex Side) 3A/2, Surface
trregularity (Peak to Valley) A/4.
lens A1 inch, plano-convex, 650-1050 nm AR coated, fused silica, focal length 75 mm,
84 |lens1"f=75mm Surface Flatness (Plano Side) A/2, Spherical Surface Power (Convex Side) 3A/2, Surface
Irregularity (Peak to Valley) A/4.
lens 91 inch, plano-convex, 650-1050 nm AR coated, fused silica, focal length 100
85 |lens1"f=100mm mm, Surface Flatness (Plano Side) A/2, Spherical Surface Power (Convex Side) 3/2,
Surface irregularity (Peak to Valley) A/4.
lens 1 inch, plano-convex, 650-1050 nm AR coated, fused silica, focal length 200
86 | lens 1" f=200mm mm, Surface Flatness (Plano Side) A/2, Spherical Surface Power (Convex Side) 3W/2,
Surface Irregularity (Peak to Valley) A/4.
lens 1 inch, plano-convex, 650-1050 nm AR coated, fused silica, focal length 250
87 | lens 1" f=250mm mm, Surface Flatness (Plano Side) A/2, Spherical Surface Power (Convex Side) 3A/2,
Surface Irregularity (Peak to Valley) A/4.
lens 91 inch, plano-convex, 650-1050 nm AR coated, fused silica, focal length 300
88 | lens 1" f=300mm mm, Surface Flatness (Plano Side) A/2, Spherical Surface Power (Convex Side) 3A/2,
Surface Irregularity (Peak to Valley) A/4.
OAP1" UV.enhanced P parabolic mirror 90 deg, linch diameter, UV-Enhanced Aluminum coating,
89 l k effective focal length 4", Surface Roughness: <100 Á (RMS), Clear Aperture: > 90 % of
Aluminium f=4 i
Diameter.
Off-axis parabolic mirror 90 deg, 1 inch diameter,Protected Gold coating, effective
90 | OAP1" gold f=2" focal length 2", Surface Roughness: < 100 Á (RMS), Clear Aperture: > 90 % of
Diameter.
Ooff-axis parabolic mirror 90 deg, 1 inch diameter, Protected Gold coating, effective
91 | OAP1“ gold f=4" focal length 4", Surface Roughness: < 100 Á (RMS), Clear Aperture: > 90 % of
Diameter.
Off-axis parabolic mirror 90 deg, 1 inch diameter,Protected Gold coating, effective
92 | OAP1" gold f=6" focal length 6", Surface Roughness: < 100 Á (RMS), Clear Aperture: > 90 % of
Diameter.
Off-axis parabolic mirror 90 deg, 1inch diameter, Protected Gold coating, effective
93 | OAP1"gold f*200mm | focal length 200 mm, Surface Roughness: < 175 A (RMS), Surface Figure, RMS %A,
Clear Aperture: > 90% of Diameter.
beamsolitter 2" beamsplitter (92 inch, split ratio 50:50, fused silica, coating 350 - 1100 nm, thickness 8
94 m B mm, Damage Threshold > 10 J/cm2 (810 nm, 10 ns, 10 Hz, 90.130 mm), Splitter Ratio
: Tolerance + 12 % Over Entire Wavelength Range.
dir 4 beamsplitter Ó1 inch, matrial: Calcium Fluoride, for range 2 - 8 um, 50:50 split ratio
95 zi k. Ha (+10%), thickness 5 mm, for S/P-Polarized Light Incident at 45", Surface Flatness < 3A
= Over Clear Aperture ($22.86 mm).
ní . 24 4 P
© Fyzikální ústav el 1)
Akademie věd ČR, v.v.l. ] beamlines
beamsplitter 1"
beamsplitter 61 inch, low GDD, for range 600 - 1500 nm optimized for Ti:Sapphire
96 | 50:50 Ti:sapphire and Yb Lasers, 50:50 split ratio, thickness 1.5 mm, for P-Polarized Light Incident at 45",
optimized Surface Flatness < 3A Over Clear Aperture (80 % of diameter).
hm beamsplitter (2 inch, split ratio 90:10 R:T, fused silica, coating 700 - 1100 nm,
97 a. 5 thickness 8 mm, Damage Threshold > 10 J/cm2 (810 nm, 10 ns, 10 Hz, 0.130 mm),
i Splitter Ratio Tolerance +12 % Over Entire Wavelength Range.
P aaků beamsplitter (91 inch, split ratio 90:10 RT, fused silica, coating 700 - 1100 nm,
98 90:10 R thickness 5 mm, Damage Threshold > 10 j/cm2 (810 nm, 10 ns, 10 Hz, 0.130 mm),
: Splitter Ratio Tolerance +12 % Over Entire Wavelength Range.
roh beamsplitter 91 inch, split ratio 70:30 R:T, fused silica, coating 700 - 1100 nm,
99 70030 P thickness 5 mm, Damage Threshold > 10 J/cm2 (810 nm, 10 ns, 10 Hz, 0.130 mm),
; Splitter Ratio Tolerance +12 % Over Entire Wavelength Range.
wedge A1 inch,
ge © round wedge prism, Ó1 inch, uncoated, 4 deg Beam Deviation, Material N-BK7,
100 | uncoated, 4 deg
le Surface Flatness A/10 at 633 nm, uncoated.
Beam Deviation
beam sampler - wedge, 1 inch, 350-700 coated (refletance 0,5-1 % in this range), 5
beam sampler VIS, .
101 mm Thick, damage treshold 7.5 J/cm2 (532 nm, 10 ns, 10 Hz, $0.491 mm), Surface
0,5 % sample
Flatness A/8 © 633 nm Over the Clear Apertur.
beam sampler - wedge, 1 inch, 650-1050 coated (refletance 0,4-0,7 % in this range),
beam sampler near- :
102 TT 5 mm Thick, damage treshold 7.5 J/cm2 (810 nm, 10 ns, 10 Hz, 0.491 mm), Surface
k va Flatness A/8 © 633 nm Over the Clear Apertur.
v anablelcirouler Circular, Continuously Variable, Reflective Neutral Density Filter for atenuation via
: rotation, diameter 100 mm, Optical density range 0-4, Optical Density Tolerance £5 %
103 | continuous ND filter : ž :
(At Both Extremes), mounted (on rotation axis attatched to 1/2 inch post), Spectral
100 mm max OD 4
Range 240 - 1200 nm (uncoated).
] : Circular, Continuously Variable, Reflective Neutral Density Filter for atenuation via
variable circuler : : . : ; :
: rotation, diameter 100 mm, Optical density range 0-2, Optical Density Tolerance 15 %
104 | continuous ND filter ; ; .
(At Both Extremes), mounted (on rotation axis attatched to 1/2 inch post), Spectral
100 mm max OD 2
Range 240 - 1200 nm (uncoated).
S amable cireu|r Circular, Continuously Variable, Reflective Neutral Density Filter for atenuation via
: rotation, diameter 50 mm, Optical density range 0-4, Optical Density Tolerance 5 %
105 | continuous ND filter i . :
(At Both Extremes), mounted (on rotation axis attatched to 1/2 inch post), Spectral
50 mm max OD 2
Range 240 - 1200 nm (uncoated).
Continuously , : = 3 oh
Variable ND Filter. 25 Continuously Variable ND Filter, 25 x 100 mm, linear distribution OD: 0.04 - 2.0,
106 : Optical Density Tolerance +5 % (At Both Extremes), Spectral Range 240 - 1200 nm
mm x 100 mm, OD:
(uncoated).
0.04 - 2.0
= ($1 inch unmounted UV Fused Silica Reflective ND Filters Optical density = 1, Substrate
reflective ND filter : rá H
107 oD Material UV-Fused Silica, Spectral Range 200 - 1200 nm, Thickness 1 mm, Surface
0 Accuracy © 633nm<5A.
. ď (£ dá
© Fyzikální ústav eě| el 1)
Akademle věd ČR, v, v. l. ] beamlines
lens achromatic
unmounted achromatic dublets (lense), Ó25.4 mm, Design Wavelengths 706.5 nm,
108 T 855 nm, and 1015 nm,AR coating for 650-1050 nm (les than 0.5 % reflectance), f=60
a mm, focal length shift in 650-1050 nm range < 0.3 mm.
len SE tomatic unmounted achromatic dublets (lense), 025.4 mm, Design Wavelengths 706.5 nm,
109 Penam 855 nm, and 1015 nm,AR coating for 650-1050 nm (les than 0.5 % reflectance), f=500
s mm, focal length shift in 650-1050 nm range < 0.3 mm.
lens achromatic unmounted achromatic dublets (lense), 025.4 mm, Design Wavelengths 486.1 nm,
110 Pon 587.6 nm, and 656.3 nm, AR coating for 400-700 nm (les than 0.5% reflectance),
a f=500 mm, focal length shift in 450-700 nm range < 0.3 mm.
111 compresor grating compresor grating golden 1200 groves/mm, diameter 50x50x10, NIR (800 nm
1200 g/mm optimized), Expected efficiency (TM/-1) © Dev 8 deg > 90 %.
Ruled Reflective
: Ruled Reflective Grating, 400 nm blaze, 1200 g/mm, 25 x 25 x 6 mm (+- 1 mm),
k efficiency at 400 nm > 65 %
blaze, 1200g/mm 4 i
UV Reflective
i : UV Reflective Holographic Grating, 1800/mm, 25 x 25 x 6 mm (+- 1 mm), efficiency at
113 | Holographic Grating,
260-295 nm > 60 %.
1800g/mm
2700 g/mm plane
ruled reflection
114 grating with 20" 2700 g/mm plane ruled reflection grating with 20" nominal blaze angle, optimized for
nominal blaze angle, | 259 nm, groove length: 102 mm ruled width: 34 mm, efficiendy at 259 nm >80 %.
optimized for 259
nm
Visible interference Visible Bandpass Filter Kit (10 nm FWHM), Mounted,Ó1", Minimum Clear Aperture
n Bandpass Filter Kit (621 mm, Thickness < 6.3 mm, minimal transmission at center 35 %, Out of Band
(10 nm FWHM), Transmission <0.01% from 200 nm to 3.0 um, Set of 10: 350 nm, 400 nm, 450 nm, 500
Mounted, Set of 10 nm, 550 nm, 600 nm, 650 nm, 700 nm, 750 nm, 800 nm.
| 25 mm Colored ($25 mm Colored Glass Filter Kit, Set of 10: 400 nm Longpass, 495 nm Longpass, 550
116 | Glass Filter Kit, Set of | nm Longpass, 610 nm Longpass, 715 nm Longpass, 780 nm Longpass, 850 nm
10 Longpass, 315 - 710 nm Bandpass, 335 - 610 nm Bandpass, 325 - 385 nm Bandpass.
(25 mm Colored 25 mm Colored Glass Filter Kit, Set of 10: 400 nm Longpass, 495 nm Longpass, 550
117 | Glass Filter Kit, Set of | nm Longpass, 610 nm Longpass, 715 nm Longpass, 780 nm Longpass, 850 nm
10 Longpass, 315 - 710 nm Bandpass, 335 - 610 nm Bandpass, 325 - 385 nm Bandpass.
. (925 mm reflective ND filter kit, Box with 10 UVFS (substrate transmission 200- 1100
925 mm reflective : “ >
118 . . nm) Reflective Ó25 mm mounted ND Filters, inclooded OD: 0.1, 0.2, 0.3, 0.4, 0.5, 0.6,
ND filter kit, set of 10
1.0, 2.0, 3.0, 4.0.
61" Bandpass Filter, A : : ní
1" Bandpass Filter, CWL = 350 + 2 nm, FWHM = 10 t 2nm, min Transmission 25 %,
BRE oa MA ||blockine 20013000 nmfOD"4
FWHM=10t+2nm = :
25 mm 925 mm interference notch filter, dimension 25 x 3,5 mm, center 808 nm, out of the
120 | interference notch notch transmission > 90 % for 400 -1550 nm, at 808 nm (notch) OD > 5, Typical Notch
filter, center 808 nm
Bandwidth = 41 nm.
»
Fyzikální ústav
1)
Akademle věd ČR, vv. i.
eli
beamtines
(025 mm
($25 mm interference 266 nm laser clean-up filter, dimension 25 x 3,5 mm, FWHM of
Translation Stage
121 | interference 266 nm , sí
2.4 nm (maximum), transmmission at 266 > 50 %.
laser clean-up filter
(25 mm
S) interference 266 nm | 925 mm interference 266 nm locking edge long-pass filter, OD > 2 below 270 nm, OD
locking edge long- > 3 below 267 nm, transmission above 275 nm > 90%.
pass filter
Kinematic Mount Kinematic Mount with Vertical Drive (all of the adjusters outside of the optical path),
| 123 | with Vertical Drive, for hosting optic 025.4 mm, min 3 mm thkness, Total Angular Range of +3", 0.25" per
(925.4 mm Revolution Adjustment.
1" Low Drift Low Drift Mirror Mount, 3 Adjusters for hosting G 1 inch optics, M4 taps for post
124 | Kinematic Mirror mounting,tip/tilt 5/64" Balidriver driven , Less than 2 prad Deviation after
mount Temperature Cycling.
2" Low Drift Low Drift Mirror Mount, 3 Adjusters for hosting Ó 2 inch optics, M4 taps for post
125 | Kinematic Mirror mounting,tip/tilt 5/64" Balldriver driven , Less than 2 urad Deviation after
mount Temperature Cycling.
Low-Profile Compact | Low-Profile Compact Kinematic Mirror Mount (max overall volume: 25.4 x 28.7 x 20.1
126 | Kinematic Mirror mm) for hosting (Ó 1 inch optics, M4 taps for post mounting,tip/tilt 5/64" Balldriver
Mount driven.
High-Precision : ji i ů = 3 .
tn hm art 1“ High-Precision Rotation Mount with Polarizing Prism Mount, Metric, for 8 mm
127 Polarizing Prism and 10 mm Polarizing Prisms, 360" Continuous Coarse Rotation, £7“ of Micrometer-
: Driven Fine Rotation, Vernier Scale with Two Resolution Options, 5 arcmin resolution.
Mount, Metric
Lens Tube Mount for
128 | 15mm Mounted 1" Lens Tube Mount for 15 mm Mounted Polarizing Prisms.
Polarizing Prisms
Lens Tube Mount for
80r10mm 8 .
129 te O1“ Lens Tube Mount for 8 mm and 10mm Mounted Polarizing Prisms.
Mounted Polarizing
Prisms
35 | Mount for Kinematic Mount (+-4% adjustable tip/tilt) for hosting 2" (50.8 mm) Tall Rectangular
rectangular optics Optics of thickness 3 -10 mm.
3" Precision Precision Mirror Mount, 2 Adjusters for hosting (93 inch optics, M4 taps for post
131 | Kinematic Mirror mounting,tip/tilt 5/64" Balldriver driven, Angular Adjustment +48, 5.0 mrad/rev
mount resolution.
4" Precision E Á ; , : >
. A Precision Mirror Mount, 2 Adjusters for hosting 94 inch optics, M4 taps for post
132 | Kinematic Mirror i i k : ;
mourá mounting,tip/tilt 5/64" Balldriver driven, Angular Adjustment +49.,
25mm XYZ 25 mm KYZ Translation Stage with Standard Micrometers, M6 Taps, Resolution: 500
133 um Translation
per Revolution.
©
Fyzikální ústav
1)
Akademie věd ČR, vv..
el
beamlines
Optics Mount 1" with Ouick Release Mounting Carriage - magnetic coupling (mount
134 1" lens optics mount | has a post mountated back plate to which a removable mounting carriage for hosting
for guick release (1 inch optics (suhc as lense) can be magnetically coupled), Max Optic Thickness
0.35" (8.9 mm), Repeatability 1 um.
magnetic base, to
135 né 5 top plate for kinematic base, 25 x 25 mm, M4 counterbore.
136 spanner wrench for Spanner Wrenche for installing and adjusting retaining rings for 91" Lens Tubes and
1" retaining rings Mounts.
137 Right-Angle Clamp Right-Angle Clamp for 1/2" Posts, 5 mm Hex (lockable clamp for mounting two posts
for $1/2" Posts together perpendicularly).
S Translation Stages should provide 2" (50.8 mm) travel on axis and feature a mounting
: i surface of minimal diameter: 3.75 x 3.75" (95 x 95 mm) with 1/4"-20 (M6) tapped
138 | Translation Stage, 50 : == : :
.- mounting holes, Angular Deviation <2 mrad, Coarse Thread Pitch 18 TPI, Fine
Adjustment Thread Pitch 100 TPI.
Adjustable Mirror Mount Kit for Optical Delay Line (two orthogonal surfaces for
139 adjustable mirror mounting pair of standard mirrors (up to 2") into a roof structure, allowing an input
delay line mount kit | optical beam to be reflected back, parallel to itself,wiht maximal deviation 30 arc
sec.), mounteble directly via a centralized hole counterbored for (M6) cap head.
5-Axis Kinematic Mount 91" optics, Five Axes of Lockable Adjustment: Pitch/Yaw: +4"
140 5-Axis Kinematic at 8 mrad/rev, X and Y translation: £0.04" (£1.0 mm) at 254.0 um/rev, Z translation:
Mount 1" optics +0.13" (£3.2 mm), SM1-Threaded (1.035"-40) Bore for O1" (25.4 mm) Optics up to
0.38" (9.5 mm) Thick, Two 48 (M4) Counterbores for Post Mounting.
141 Spectrometer 200- spectrometer, spectral range 200-1080 nm, integration time 1 ms - 65 s, spectral
1080 nm resolution <= 1.5 nm, fiber optic input, USB interface.
Plano-Concave Plano-Concave Cylindrical Lens , f=-50 mm, H=30 mm, L=32 mm, N-BK7 AR Coating:
142 = 650-1050 nm, Surface Flatness (Plano Side) A/2, Spherical Surface Power (Concave
Cylindrical Lens f=-50 | © :
Side) 3A/2, Surface Irregularity (Peak to Valley) A/4.
Plano-Convex Plano-Convex Cylindrical Lens, f = 100.00 mm, H = 30.00 mm, L = 32.0 mm, N-BK7 AR
143 | Cylindrical Lens Coating: 650-1050 nm, Surface Flatness (Plano Side) A/2, Spherical Surface Power
f=100 (Convex Side) 3A/2, Surface Irregularity (Peak to Valley) A/4.
E ae unmounted achromatic dublets (lense), 025.4 mm, Design Wavelengths 706.5 nm,
144 may 855 nm, and 1015 nm,AR coating for 650-1050 nm (les than 0.5% reflectance), f=100
u mm, focal length shift in 650-1050 nm range < 0.3 mm.
l sehromátié unmounted achromatic dublets (lense), 625.4 mm, Design Wavelengths 706.5 nm,
145 ooo 855 nm, and 1015 nm,AR coating for 650-1050 nm (les than 0.5 % reflectance), f=200
% mm, focal length shift in 650-1050 nm range < 0.3 mm.
SM1-Mounted
: O1" Zero-Order Half-Wave Plate, 808 nm, Beam Deviation <10 arcsec, Surface Ouality
146 | Achromatic Half-
20-10 SD, SM1-Threaded Mount.
Wave Plate
Off-Axis Parabolic Ooff-axis parabolic mirror, 2 inch diameter, Protected Silver, reflected focal length 4",
147 | Mirror, Protected off-axis angle 90 deg, surface flatness A/4, surface guality 40-20 scratch-dig, damage
Silver f=4" threshold 0.3 J/cm2 at 355 nm, 10 ns, 10 Hz.
X
Fyzikální ústav
1)))
I6|18
Akademie věd ČR, v.v.i.
el
beamlines
Off-Axis Parabolic
Off-axis parabolic mirror, 2 inch diameter, Protected Silver, reflected focal length 6",
148 | Mirror, Protected off-axis angle 90 deg, surface flatness A/4, surface guality 40-20 scratch-dig, damage
Silver f=6" threshold 0.3 J/cm2 at 355 nm, 10 ns, 10 Hz.
Pyroelectric sensors for the application in the range from 10 jum to 3000 m
149 | pyroeletric detector | (freguency 0.1 - 30 THz); Effective aperture: min. 5 mm diameter, Max. measurable
power 140 uW.
Mesšerne ěe unmounted achromatic dublets (lense), d50.8 mm, Design Wavelengths 706.5 nm,
150 f=75mm 855 nm, and 1015 nm,AR coating for 650-1050 nm (les than 0.5 % reflectance), f=75
mm, focal length shift in 650-1050 nm range < 0.3 mm.
Plano-Concave Plano-Concave Cylindrical Lens , f=150 mm, H=100 mm, L=90 mm, N-BK7 AR Coating:
151 | Cylindrical 650-1050 nm, Surface Flatness (Plano Side) M2, Spherical Surface Power (Concave
Lens f=150 Side) 3A/2, Surface Irregularity (Peak to Valley) A/4.
Plano-Concave Plano-Concave Cylindrical Lens , f=300 mm, H=60 mm, L=62 mm, N-BK7 AR Coating:
152 | Cylindrical 650-1050 nm, Surface Flatness (Plano Side) A/2, Spherical Surface Power (Concave
Lens f=300 Side) 3A/2, Surface Irregularity (Peak to Valley) A/4.
ž Makm Kinematic Prism Mount, For mounting of prism min. 20 x 20 x 10 mm, +4' of Fine Tip
kinematic prism : Ů ř :
153 mount and Tilt Control, 8 mrad Adjustment per Revolution, Mounting Platform with M4
tapped holes.
: Clamping Arm, M4 Threaded Post, Accommodates optics up to 40.9 mm, 29.3 mm
154 | arm for prism mount ; :
center-to-center distance between the post and the nylon-tipped setscrew.
Compatible with $1" Mirror Mounts, Kinematic Grating Mount Adapter, Grating
kinematic gratin MeaLe ěz Te
155 móunt H 8 Accommodates Gratings up to 60 mm Tall
Spring-Loaded Clamping Design
Top-Located Locking Setscrew.
1" Low Drift Low Drift Mirror Mount, 3 Adjusters for hosting $ 1 inch optics, M4 taps for post
156 | Kinematic Mirror mounting,tip/tilt 5/64" Balldriver driven , Less than 2 uurad Deviation after
mount Temperature Cycling.
aB7 Fixed Cylindrical Lens | Fixed Cylindrical Lens Mount, Two rubber-lined arms mount for a cylindrical lens for
Mount the optic height range of 0 mm to 66.0 mm.
: : : Kinematic rotation mount with kinematic angular adjustment and rotation in one
Kinematic Rotation I J ,
158 | Mount for 81" mount, 1/4"-80 lockable adjusters for +4" of angular adjustment, engraved rotation
Optičí scale with 2* graduations, 360 rotation, SM1-Threaded Rotation Ring with Locking
A Screw.
2" Precision ní ň H : A a
: mÁ Precision Mirror Mount, 2 Adjusters for hosting 92 inch optics, M4 taps for post
159 | Kinematic Mirror ř C) s : :
modAt mounting,tip/tilt 5/64" Balldriver driven, Angular Adjustment +42.
Lens Mount with ; r„ : T M
160 Fixed lens mount for 2" optics, M4 tapped, Includes Compatible Retaining Ring.
Retaining Ring
4
Fyzikální ústav
p
Akademile věd ČR, v. v.
„A ai
beamlines
1" Woillaston Prism, 20" at 633 nm Beam Separation, 650-1050 nm AR Coating,
161 | Wollaston Prism diameter 22,6 mm, Transmitted Wavefront Error <A/4 at 632.8 nm, Surface Ouality
20-10 SD.
162 1" Zero-Order O1" Zero-Order Ouarter-Wave Plate, 808 nm, Beam Deviation <10 arcsec, Surface
Ouarter-Wave Plate | Ouality 20-10 SD, SM1-Threaded Mount.
Switchable Gain Detector, 350-1100 nm, Peak
ES preampiified Si- Response 0.65 A/W
Photodiode © 970 nm, Bandwidth Range DC - 10 MHz, Active Area 13 mm2, Gain 8 x 10 dB Steps,
230 VAC.
Large-Area Balanced Photodetector (pair of sensors acts as a balanced receiver by
Large-Area Balanced : aa 4 :
164 | Amolified subtracting the two optical input signals from each other), Si, 320-1060 nm, M4 Taps,
; Common Mode Rejection Ratio z 30 dB, responsivity 0.6 A/W (© 920 nm, active
Photodetectors j .
detector diameter 5 mm, included +12 V DC power supply for 230/115 V AC.
2" (450.8 mm) Protected Silver Mirror, 0.47" (12.0 mm) Thick with Average
k ds . Reflectance > 97.5 % for 450 nm - 2 um, Surface Flatness A/10 © 633 nm, Parailelism
165 | 2" silver mirror ;
<3 arcmin, Damage Threshold 3 J/cm2 © 1064 nm, 10 ns, 10 Hz, 1.000 mm, Surface
Ouality 40-20 Scratch-Dig.
166 | Iris 0-25mm Mounted Zero Aperture Iris, 25.0 mm Max Aperture, Metric , 75 mm post.
167 Mount for guarter Continuous Rotation Mount for $1" Optics with Adjustable Zero, Rotational Position
plate Lockable via Setscrew, M4 tapped hole, Internal SM1 thread.
5 1.00" lens tube for 1" Stackable Lens Tube, SM1 External Thread, SM1 internal thread, 1.00" Internal
prism Thread Depth, One Retaining Ring Included, 1.15 in (29.2 mm) length.
Cage-Cube-Mounted Polarizing Beamsplitter Cube, 620-1000 nm, Transmitted
Cage-Cube-Mounted A I ší ; i
169. | Polarizin Extinction Ratio: Tp:Ts > 1,000:1 Transmission Efficiency: Tp > 90 % Reflection
a) Efficiency: Rs > 99.5 % Four SM1-Threaded Ports
Beamsplitter Cube
4-40 Tapped Holes for 30 mm Cage.
complete periscope assembly to redirect and change the height of a beam within an
170 |1" periscope optical system for 1" (925.4 mm) optics, 360“ continuous rotation with +4“ tip and
tilt, 150 mm pilar post.
: Free-Space Optical Delay Line Kit, Maximum Optical Delay, Delay Steps as Short as 3.3
Free-Space Optical g ně : ě :
171 Des line Kit100 fs over a 666.6 ps Range with Pre-Aligned V-Block with Kinematic Adjusters and !ris
4 o=tí Slots, 100 mm travel range translation stage, two irises, periscope assembly for Input
mm Travel, Metric i
Beam Height 61.0 mm - 152.4 mm.
Ultralight High Optical Breadboard 900 x 900 x 25 mm, M6 Taps Max. weight 37 kg, Flatness 10.15
172 mm (+0.006") Over Any 0.3 m2, Threads and Spacing: M6 T d Holes on 25 mm
Stiffness Breadboard z k ii. A 7 ta ak
Table 1: Technical specification of the products.
X
Fyzikální ústav
1)
Akademie věd ČR, vv..
eli
beamtines
„n
=H
g>-
hoj
01
ZA
mirror 2" sguare, gold
mirror, sguare, 50.8 x 50,8 mm, protected gold coating, surface
fiatness A/8, surface gualíty 40-20 scratch-dig, wedge angle < 3 arc
min, damage threshold: > 2J/cm2 at 1064 nm, 10 ns, 10 Hz.
2 581,00 Kč
542,01 Kč
3123,01Kč
10 324,00 Kč
2 168,04 Kč
12 492,04 Kč
Thortabs
PFSO20-03-
Mo1
PF5020-03-M01
mirror, sguara, 50.8 x 50.8 mm, protected gokd
costing, surface flatness A/B, surface guality 40-20!
scratch-dig, wedge angle < 3 arc min, damage
threshoki: > 2 J/cm2 at 1064 nm, 10 ns, 10 Hz.
10
mirror 2" UV enh. aluminum
mirror, sguare, 50.8 x 50.8 mm, UV enhanced Aluminum, R> 90 % for
250-450 nm, surface flatness A/8, surface guality 40-20 scratch-dig,
wedge angle < 3 arc min, damage threshold > 0.3 J/cm2 at 355 nm, 10)
ns, 10 Hz.
2 205,00 Kč
463,05 Kč
2 668,05 Kč
8 820,00 Kč
1852,20 Kč
10 672,20 Kč
(Thorlabs
PF20-03-F01
PF20-03-F01
mirror, sguare, 50.8 x 50.8 mm, UV enhanced
Aluminum, R> 90 % for 250-450 nm, surface
flatness A/8, surface guality 40-20 scratch-dig,
wedge angle < 3 arc min, damage threshold > 0.3
J/cn2 at 355 nm, 10 ns, 10 Hz.
11
mirror 1" silver
mirror dlameter 1 Inch or 25.4 mm, p d stiver coating, suh
fusad silica, wedge < 5 min, surface flatness: A/10, surface guality 10-5
seratch-dig, low GDD: 600 - 1000 nm.
882,00 Kč
185,22 Kč
1067,22Kč
52 920,00 Kč
11 113,20 Kč
64 033,20 Kč
Altechna
1-05-1-0254-
6-[9AG0]
1-05-1-0254-6-[9AG0]
mirror díametar 1 inch or 25.4 mm, protected
silver coating, substrate: fused silica, wedge < 5
min, surface flatness; A/10, surface guality 10-5
scratch-dig, low GDD: 600 - 1000 nm.
12
mirror 1" UV enh, aluminum
mirror, di linch, UV ent d Al R>90% for 250-450
nm, surface flatness A/10, surface guality 40-20 scratch-dig, wedge
angle < 3 arc min, damage threshold > 0.3 J/cm2 at 355 nm, 10 ns, 10
Hz.
45
882,00 Kč
185,22 kč
1.067,22 Kč
39 690,00 Kč
8 334,90 Kč
48 024,90 Kč
Altechna
1-05-2-0254-
5-[9AL1]
1-05-2-0254-5-[9AL1]
mirror, di Zinch, UVenh dAl
R>90% for 250-450 nm, surface flatness A/10,
surface guality 40-20 scratch-dig, wedge angle < 3
arc min, damage threshokd > 0.3 J/cm2 at 355 nm,
10 ns, 10 Hz.
12
coneava focusing mirror 2"
pokl, f = 1000mm
mirror 2 inch dlameter, protected gold coating, concava, effective
focal length "1000 mm, surface flatness 4/4, surface guality 60-40,
Idamage threshotd 0,8 J/erm2 at 1064 nm, 10 ns.
4 595,00 Kč
964,95 Kč
5 559,95 kč
4 595,00 Kč
964,95 Kč
5 559,95 Kč
Custom
mirror 13
Custom mirror 13
mirror 2 Inch diameter, protected goki coating,
|concave, effective focal length 1000 mm, surface
flatness A/4, surface guality 60-40, damage
threshokd 0.8 J/crn2 at 1064 nn, 10 ns.
14
concave focusing mirror 2"
silver, f = 1000mm
mirror 2 inch diameter, protected silver coating, concave, effective
focal length 1000 mm, surface flatness A/4, surface guality 60-40,
darnage threshold 0.8J/cm2 at 1064 nn, 10 ns.
3922,00 Kč
823,62 Kč
4 745,62 Kč
3922,00 Kč
823,62 Kč
4 745,62 Kč
Altechna
Custom
mirror 14
Custom mirror 14
mirror 2 inch dlameter, protected silver coating,
concave, effective focal length "1000 mm, surface
flatness 4/4, surface aualíty 60-40, damage
threshold 0.8)/cmm2 at 1064 nm, 10 ns.
concave focusing mirror 1"
atlver, fa 250mm
mirror 1" diameter, protacted silver coating, concave, effective focal
length "250 mm, surface fiatnass A/4, surface guality 60-40, darnage
threshold 0,8 J/cm2 at 1064 nm, 10 ns.
1737,00 Kč
364,77 Kč
2101,77 Kč
1737,00 Kč
364,77 Kč
2 101,77 Kč
Altechna
mirror 15
Custom mirror 15
mirror 1" diameter, protected silver coating,
concave, effective focal length "250 mm, surface
flatness A/4, surface guality 60-40, damage
threshoki 0.8 J/cm2 at 1064 nm, 10 ns.
16
concave focusing mirror 1"
silver, f = 400mm
mirror 1" diameter, protected silver coating, concave, effective focal
length *400 mr, surface flatness A/4, surface guality 60-40, damage
threshold 0.8 J/cm2 at 1064 nm, 10 ns.
1 737,00 Kč
364,77 Kč
2101,77 Kč
1737,00 Kč
364,77 Kč
2101,77 Kč
Altechna
Custom
mirror 16
Custom mirror 16
mirror 1" diameter, protected silver coating,
concave, effective focal length *400 mm, surface
Alatness A/A, surface guality 60-40, damage
threshold 0.8 J/cm2 at 1064 nm, 10 ns.
17
concave focusing mirror 1"
stiver, f= 750mm
mirror 1“ diameter, protected silver coating, concave, effective focal
length *750 mm, surface flatness I/4, surface guality 60-40, damage
threshold 0,8 J/em2 at 1064 nm, 10 ns.
1.737,00 Kč
364,77 Kč
2 101,77 Kč
1 737,00 Kč
364,77 Kč
2 101,77 Kč
Altechna
Custom
mirror 17
Custom mirror 17
mirror 1" dlameter, protected silver coating,
Iconcave, effective focal length 750 mrn, surface
flatness A/4, surface guality 60-40, damage
threshold 0.8 J/cm2 at 1064 nm, 10 ns.
18
concave focusing mirror 1"
silver, f= 1000mm
mirror 1" diameter, protected sliver coating, concave, effective focal
length "1000 mm, surface flatness A/4, surface auality 60-40, d;
threshold 0.8 J/em2 at 1064 nm, 10 ns.
1737,00 Kč
364,77 Kč
2 101,77 Kč
1 737,00 Kč
364,77 Kč
2 101,77 Kč
Altechna
Custom
mirror 18
Custom mirror 18
mirror 1" diameter, protected silver coating,
concave, effective focal length "1000 mm, surface
flatness A/4, surface guality 60-40, damage
threshold 0.8 J/cm2 at 1064 nm, 10 ns.
19
concave focusing mirror 1"
stivar, [= 1500mm
mirror 1" diamater, protected sliver coating, concave, effective focal
length "1500 mm, surface flatness A/4, surface guality 60-40, damage
threshold 0.8j/em2 at 1064 nm, 10 ns.
1737,00 Kč
364,77 Kč
2 101,77 Kč
1737,00 Kč
364,77 Kč
2 101,77 Kč
Altechna
Custom
mirror 19
Custom mirror 19
mirror 1" dlameter, protected silver coating,
|concave, effective focal length "1500 mm, surface
flatness.A/4, surface guality 60-40, damage
threshold 0.8J/cm2 at 1064 nm, 10 ns.
concave focusing mirror 1“
silver, f = 2000mm
mirror 1" diameter, protected silver coating, concave, effective focal
length "2000 mm, surface fiatness A/4, surface guality 60-40, darnage
threshold 0.8 J/cm2 at 1064 nm, 10 ns.
1737,00 Kč
364,77 Kč
2101,77 Kč
1737,00 Kč
364,77 Kč
2 101,77 Kč
Altechna
Custom
mirror 20
Custom mirror 20
mirror 1" diameter, protected silver coating,
concave, effective focal length *2000 mm, surface
flatness A/4, surface guality 60-40, damage
threshold 0.8 1/cm2 at 1064 nm, 10 ns.
či
concave focusing mirror 2"
UV enhanced aluminium
mirror 2 inch dí M: d UVenh dal coating,
concave, effective focal length "1000 mm, surface flatnass A/4, surface:
auality 60-40, darnage threshold 0,8J/cm2 at 1064 nm, 10 ns.
4 381,00 Kč
920,01 Kč
5301,01Kč
4 381,00 Kč
920,01 Kč
5301,01Kč
Newport
20DC2000AL. jat
20DC2000AL.2
mirror 2 Inch di , Pi j UVenh d
coating, , effective focal length
"1000 mm, surface flatness W/4, surface guality 60)
40, damage threshokd 0,8i/cm2 at 1064 nm, 10
ns.
22
concave focusing mirror 2"
silver
mirror 2 inch or 50.8 mm dřameter, protected silver coating, low GDD
600-1000 nm, concave, focal length "2000 mm (radius 4000 mm),
surface flatness: A/4, surface auality 10-5 scratch-digs.
10 710,00 Kč
2 249,10 Kč
12 959,10 Kč
10 710,00 Kč
2 249,10 Kč
12 959,10 Kč
Layertec
104415
104415
mirror 2 inch or 50.8 mm diameter, protected
silver coating, low GDD: 600-1000 nm, concave,
focal length *2000 mm (radius 4000 mm), surface
flatness: A/4, surface guality 10-5 scratch-digs.
a
convex mirror 1" sllver, f =
1000mm
mirror 1 inch dlamater, protected silver coating, convax, focal length
2000 mm (radius 2000 mm), surface flatnass: A/10, surface guality: 40)
20 seratch-dig, damage thrashold; 0,25 4/cm2 at BO0 nm, 94 fs.
1877,00 Kč
394,17 Kč
2271,17 Kč
1877,00 Kč
394,17 Kč
2271,17 Kč
Eksma Optics
092-
0225R+2000
092-0225R+2000
mirror 1 inch diameter, protected silver coating,
convex, focai length 1000 mm (radius 2000 mm],
surface flatness: A/10, surface guality: 40-20
scratch-dig, damage threshold: 0.25 J/cm2 at 800
nn, 94 fs.
24
convex mirror 1" UV
enhanced aluminium f=
1000mm
mirror 1 inch di „UV ent dal coating, convex, focal!
length 1000 mm (radius 2000 mm), surface flatness: A/10, surface
auality: 40-20 scratch-dig, damage threshold: 0.25 J/cm2 at 800 nm,
94 fs.
105,00 Kč
337,05 Kč
1 942,05 Kč
1605,00 Kč
337,05 Kč
1 942,05 Kč
Eksma Optics
092-
0215R+2000
092-0215R+2000
mirror 1 inch di: „ UVenh dal
coating, convex, focal length 1000 mm (radius
2000 mmm), surface flatness: A/10, surface guality:
40-20 scratch-dig, damage threshold: 0.25 J/cm2
at 800 nm, 94 fs.
convex mirror 1" silver f =
750mm
mirror 1 inch dlametar, protected silver coating, convex, focal length
750 mm (radius 1500 mm), surface flatness: A/10, surface auality: 40-
20 seratch-dig, damage threshold: 0.25 J/cm2 at BO0 nm, 94 fs.
1 877,00 Kč
394,17 Kč
2 271,17 Kč
1 877,00 Kč
394,17 Kč
2271,17Kč
Eksma Optics
092-
|0225R+1500
092-0225R+1500
mirror 1 Inch diameter, protected silver coating,
Iconvex, focal length 750 mm (radius 1500 mm),
surface fiatness: A/10, surface duality: 40-20
iscratch-dig, darnage threshokd: 0,25 J/cm2 at 800
nm, 94 fs.
26
convex mirror 1" UV
enhanced aluminium, f=
750mm
mirror 1 inch dí UVenh dal coating, convex, focal|
length 750 mm (radius 1500 mrn), surface flatness: A/10, surface
guality: 40-20 scratch-dig, damage threshold: 0.25 J/cm2 at 800 nm,
94 fs.
4 080,00 Kč
856,80 Kč
4 936,80 Kč
4 080,00 Kč
856,80 Kč
4 936,80 Kč
Eksma Optics
092-
0215R+1500
092-0215R+1500
mirror 1 inch di UV enh dal
coating, convex, focal length 750 mm (radius
1500 mm), surface flatness: A/10, surface guality:
40-20 scratch-dig, damage threshold: 0.25 i/cm2
at 800 nm, 94 fs.
27
convex mirror 1" sliver, f=
500mm
mirror 1 inch dlameter, protected sliver coating, convex, focal length
500 mm (radius 1000 mm) , surface flatness: A/10, surface guality: 40-
20 scratch-dig, damage threshold: 0,25 J/cm2 at 800 nm, 94 fs.
1 877,00 Kč
394,17 Kč
2 271,17 Kč
1877,00 Kč
394,17 Kč
2271,17 Kč
Eksma Optics
092-
|0225R+1000
092-0225R+1000
mirror 1 Inch dtameter, protected silver coating,
convex, focal length 500 mm (radius 1000 mr),
surface flatness: A/10, surface guality: 40-20
seratch-dig, damage threshold: 0.25 J/cm2 at 800
nm, 94 fs.
28
convex mirror 1" silver, f
=400mm
mirror 1 inch diameter, protected silver coating, convex, focal length
400 mm (radius 800 mrn), surface flatness: A/10, surface auality: 40-
20 scratch-dig, damage threshold: 0.25 J/cm2 at 800nm, 94 fs.
1877,00 Kč
394,17 Kč
2271,17 Kč
1877,00 Kč
394,17 Kč
2271,17Kč
Eksma Optics
092-
0225R+800
092-0225R+800
mirror 1 inch diameter, protected silver coating,
convex, focal length 400 mm (radius 800 mn),
surface flatness: A/10, surface guality: 40-20
tch-dig, d hreshold: 0.25 J/cm2 at
800nm, 94 fs.
corwex mirror 1" sliver, f
nádOMM
mirror 1 inch dlamater, protected sliver coating, convex, focal length
300 mm (radius 600 mm) , surface flatness: A/10, surface guality: 40-
20 scratch-dig, damage threshokd: 0,25 J/cm2 at 800 nm, 94 fs.
1877,00 Kč
394,17 Kč
2271,17 Kč
1877,00 Kč
394,17 Kč
2 271,17 Kč
Eksma Optics
092-
0225R+600
'092-0225R+600
mirror 1 inch dlameter, protected sllver coating,
convex, focal length 300 mm (radius 600 mm),
surface flatness: A/10, surface auality: 40-20
tch-dig, d: hreshokd: 0.25 J/cm2 at 800
om, 94 fs.
convex mirror 1" silver, f
=200mm
mirror 1 inch diameter, protected silver coating, convex, focal length
200 mm (radius 400 mm), surface flatness: A/10, surface guality: 40-
20 scratch-dig, damage threshold: 0.25 J/cmn2 at 800 nm, 94 fs.
1877,00 Kč
394,17 Kč
2271,17 Kč
1877,00 Kč
394,17 Kč
2271,17 Kč
Eksma Optics
092-
'0225R+400
092-0225R+400
mirror 1 inch dlameter, protected silver coating,
convex, focal length 200 mm (radius 400 mm),
surface flatness: A/10, surface guality: 40-20
tch-dig, d: hreshold: 0.25 J/cm2 at 800
nm, 94 fs.
3
convex mirror 1" sjiver, f
150mm
mirror 1 Inch diamater, protected sliver coating, convex, focal length
150 men (radius 300 mm) , surface flatness: A/10, surface guality: 40-
20 seratch-dig, damage threshold: 0,25 J/cm2 at 800 nm, 94 fs.
1877,00 Kč
394,17 Kč
2271,17 Kč
1877,00 Kč
394,17 Kč
2271,17 Kč
Eksma Optics
092-
0225R+300
|092-0225R+300
mirror 1 inch diameter, protected silver coating,
convex, focal length 150 mm (radius 300 mm),
surface flatness: A/10, surface auality: 40-20
tch-dig, d hreshokl: 0.25 J/cm2 at 800
nm, 94 fs.
32
convex mirror 1" silver, f
=100mm
mirror 1 inch diameter, protected silver coating, convex, focal length
100 mm (radius 200 mm), surface flatness: A/10, surface guality: 40-
20 scratch-dig, damage threshold: 0.25 J/cm2 at 800 nrn, 94 fs.
1877,00 Kč
394,17 Kč
227117 Kč
1877,00 Kč
394,17 Kč
2271,17 Kč
Eksma Optics
092-
0225R+200
092-0225R+200
mirror 1 inch dlarneter, protected silver coating,
convex, focal length 100 mm [radius 200 mm),
surface flatness: A/10, surface guality: 40-20
tch-dig, di threshold: 0.25 j/cm2 at 800
nm, 94 fs.
33
focusing mírror 3" gold, f =
500mm
mirror, di 75 mr, p d goki coating, , f= 500 mm,
surface fiatness A/4, surface guality 40-20 scratch-dig, damage
tthresholkd > 2J/cm2 at 1064 nn, 10 ns, 10 Hz.
3 636,00 Kč
763,56 Kč
A 399,56 Kč
10 908,00 Kč
2 290,68 Kč
13 198,68 Kč
[Thorlabs
CM750-500-
M01
CM750-500-M01
mirror, dlameter 75 mm, protected gold coating,
|cohcave, f= 500 mm, surface flatness A/4, surface
guality 40-20 scratch-dig, damage threshold >
23/cm2 at 1064 nm, 10 ns, 10 Hz.
focusing mirror 3" UV enh.
Aluminum, f =500mm
mirror, di 75 mm, UV enh d alumi , f=500 mm,
surface flatness A/4, surface guality 40-20 scratch-dig, damage
threshold > 0.3 J/crm2 at 355 nm, 10 ns, 10 Hz.
3.628,00 Kč
761,88 Kč
4 389,88 Kč
7 256,00 Kč
1523,76Kč
8 779,76 Kč
[Thorlabs
CM750-500-
Fo1
CM750-500-F01
mirror, di 75 mm, UV
concave, f=500 mm, surface fiatness A/4, surface
guality 40-20 scratch-dig, damage threshold > 0.3
J/cm2 at 355 nm, 10 ns, 10 Hz.
35
focusing mirror 2" UV enh,
Aluminum, f s 200mm
mirror 2 Inch dřameter, UV anhanc. Al, concave f2200 mm, surface
flatnesa: A/4, surface guality: 40-20 seratch-dlg, damage threshold 0.3:
3/em2 at 355 nm, 10 ns.
1905,00 Kč
400,05 Kč
2 305,05 kč
5 715,00 Kč
1 200,15 Kč
6915,15 Kč
(Thorlabs
CM508-200-
FO1
|CM508-200-F01
mirror 2 inch dlameter, UV enhanc. Al, concave
f=200 mmm, surface flatness: A/4, surface guality:
40-20 scratch-dig, damage threshold 0.3 J/cm2 at
355 nm, 10 ns.
36
mirror 1 inch, Protected silver coating, concave f=500 mm, surface
focusing mirror 1" P
Silver, EFL = 500mm
flatness: A/4, surface guality: 40-20 scratch-dig, damage threshold 0.3
J/cm2 at 355 nm, 10 ns.
1 737,00 Kč
364,77 Kč
2 101,77 Kč
6 948,00 Kč
1459,08 Kč
8 407,08 Kč
Altechna
Custom
mirror 36
Custom mirror 36
mirror 1 inch, Protected silver coating, concave
f=500 mm, surface flatness: A/4, surface guality:
40-20 seratch-dig, darnage threshold 0.3 J/cm2 at
355 nm, 10 ns.
37
focusing mirror 1“ UV enh,
Aluminum, f =100mm
mirror 1 inch, UV enhance, Al, concave f=100 mrm, surface flatness: A/4,
surface gualkty: 40-20 scratch-dig, damage threshold 0.3 J/cm2 at 355
nm, 10 ns,
1 737,00 Kč
364,77 Kč
2101,77 Kč
8 685,00 Kč
1823,85 Kč
10 508,85 Kč
Altechna
Custom
mirror 37
Custom mirror 37
mirror 1 inch, UV enhanc, Al, concave f=100 mm,
surface flatness: A/A, surface guality: 40-20
teh-dig, d: hreshold 0.3 J/cm2 at 355
nm, 10 ns.
OAP 1" UV enh. Aluminum,
2" RFL
off-axis parabolic rirror, 1 inch di „UV d Al, refli d
focal length 2", off-axis angle 90 deg, surface flatness A/4, surface
guality 40-20 scratch-dig, damage threshold 0.3 J/cm2 at 355 nm, 10
ns, 10 Hz.
3721,00 Kč
781,41 Kč
4 502,41 Kč
11 163,00 Kč
2 344,23 Kč
13 507,23 Kč
Thorlabs
MPD129-F01
MPD129-F01
off-axis parabolic rnirror, 1 inch diameter, UV
enhanced Al, reflected focal length 2", off-axis
angle 90 deg, surface flatness A/4, surface guality
40-20 scratch-dig, damage threshold 0.3 J/cm2 at!
355 nm, 10 ns, 10 Hz.
OAP 1" UV anh, Aluminum, 6"
EFL
off-axls parabolic mirror, 1 inch dl: „UV d Al, refi d
focal length 6", off-axis angle 90 deg, surface flatness A/4, surface
guality 40-20 scratch-dig, damage threshold 0,3 J/cm2 at 355 nm, 10
ns, 10 Hz,
3 721,00 Kč
781,41 Kč
4502,41 Kč
3 721,00 Kč
781,41 Kč
4 502,41 Kč
[Thorlabs
MPD169-F01
MPD169-F01
loff-axis parabolic mirror, 1 inch diameter, UV
enhanced Al, reflected focal length 6", off-axis
angle 90 deg, surface flatness A/4, surface duality
40-20 scratch-dig, damage threshoki 0.3 J/cm2 at
355 nm, 10 ns, 10 Hz.
40
OAP 2" silver, 15" EFL, 15 deg
incidence
(off-axis parabolic mirror, 2 inch diameter, silver, reflected focal length
15", off-axis angle 15 deg, surface flatness A/4, surface guality 40-20
scratch-dig, damage threshold 0.3 IJ/cm2 at 355 nm, 10 ns, 10 Hz.
7 442,00 Kč
1562,82 Kč
9.004,82 Kč
7 442,00 Kč
1562,82 Kč
9004,82 Kč
Thorlabs
MPD2151-
Po1
MPD2151-P01
off-axis parabolic mirror, 2 inch diameter, silver,
reflected focal length 15", off-axis angle 15 deg,
surface flatness A/4, surface guality 40-20 scratch|
dig, damage threshold 0.3 J/cm2 at 355 nm, 10
ns, 10 Hz.
“
OAP 2" with hole paralel with|
aff-axls parabalic mirror with hola paralel with focusad beam [3 mm
Rpertura of tha hole at the polished surface, 6 mm at back), 2 Inch
focus, protactad gold, 6" AFL
d pokl, reflected focal length 6", off-axis angle 90
deg, ném fiatness A/4, surface guality 40-20 scratch-dig, damage
threzhold 0,3 J/cm2 at 355 nm, 10 ns, 10 Hz.
7 442,00 Kč
1562,82 Kč
9 004,82 Kč
7 442,00 Kč
1562,82 Kč
9 004,82 Kč
Thortabs
MPD269H-
Mo1
MPD269H-M01
|off-axis parabolic mirror with hole paralel with
|focused beam (3 mm aperture of the hole at the
[polished surface, 6 mm at back), 2 inch dlameter,
protected gold, reflected focal length 6", off-axis
angle 90 deg, surface flatness A/4, surface guality
40-20 scratch-dig, damage threshoki 0.3 J/cmn2 at:
355 nm, 10 ns, 10 Hz.
|
42
OAP 3" with hole paralel with| |
|off-axis parabolic mirror with hole paralel with focused beam (3 mm
AUTO of the hole at the polished surface, 6 mm at back), 3inch
focus, protected gold, 6" RFLÍ
, p d gold, refi d focal length 6", off-axis angle 90
deg, surface flatness A/4, surface guality 40-20 scratch-dig, darnage
threshold 0.3 J/cm2 at 355 nm, 10 ns, 10 Hz.
13 372,00 Kč
2808,12 Kč
16 180,12 Kč
13 372,00 Kč
2808,12 Kč
16 180,12 Kč
[Thorlabs
MPD369H-
M01
MPD369H-M01
off-axis parabolic mirror with hole paralel with
focused beam (3 mm aperture of the hole at the
polished surface, 6 mm at back), Jinch díameter,
protected gokd, reflected focal length 6", off-axis
angle 90 deg, surface flatness A/4, surface auality
40-20 scratch-dig, damage threshold 0.3 J/crm2 at
355 nm, 10 ns, 10 Hz.
OAP 3" with hole paralel with|
|off-axis parabolic mirror with hole paralel with focused beam (3 mm
[Aperture of tha hole at the polished surface, 6 mm at back), 3 inch
focus, protected gold, 9" RFLÍ
P d gold, reflected focal length 9", off-axis angle 90
deg, surface flatnass A/4, surface guality 40-20 scratch-dig, damage
threshold 0.3 4/cm2 at 355 nm, 10 ns, 10 Hz,
15 116,00 Kč
3 174,36 Kč
18 290,36 Kč
15 116,00 Kč
3 174,36 Kč
18 290,36 Kč
Thorlabs
MPD399H-
Mo1
MPD399H-M01
off-axis parabolic mirror with hole paralel with
focused beam (3 mm aperture of the hole at the
polished surface, 6 mm at back), 3 Inch diameter,
protected gold, reflected focat length 9", off-axis
angle 90 deg, surface flatness A/4, surface guality
40-20 scratch-dig, damage threshold 0.3 J/cm2 at
355 nm, 10 ns, 10 Hz.
OAP 2" with hole paralel with|
off-axis parabolic mirror with hole paralel with focused beam (3 mm
aperture of the hole at the polished surface, 6 mm at back), 2 inch
focus, protected gold, 4" RFLÍ
„pr d gold, ref d focal length 4", off-axis angle 90
deg, surface flatness A/4, surface guality 40-20 scratch-dig, damage
threshold 0.3 j/cm2 at 355 nm, 10 ns, 10 Hz.
7442,00 Kč
1562,82 Kč
9.004,82 Kč
14 884,00 Kč
3 125,64 Kč
18 009,64 Kč
Thortabs
MPD249H-
M01
MPD249H-M01
off-axis parabolic mirror with hole paralel with
focused bearn (3 mm aperture of the hole at the
polished surface, 6 mm at back), 2 inch diameter,
protected gold, reflected focal length 4", off-axis
angle 90 deg, surface flatness A/4, surface guality
40-20 scratch-dig, damage threshold 0.3 J/cm2 at
355 nm, 10 ns, 10 Hz,
Yartable attenuator
(wevaplata + polarizer)
Varlable attenuator (wavaplate + polarizer), 750 - 850 nm,
transmission contrast mode, attenuation 0,2 - 70%, clear aparture 15
mm, damaga threshold > 100 m/cm2 at 800 nm, 100 fs, 1 kHz.
55 271,00 Kč
11 606,91 Kč
66 877,91 Kč
110 542,00 Kč
23 213,82 Kč
133 755,82 Kč
Altechna
2-UWPA-T2-
2-UWPA-T2-0800-M
Variable ( plate + pok ), 750 -
850 nm, i mode,
0.2- 70 %, clear aperture 15 mmm, damage
threshold > 100 mi/cm2 at 800 nm, 100 fs, 1 kHz.
46
lambda/2, near IR, for
ultrashort pulses
plate A/2, 600 - 950 nm, free aperture >= 21 mm,
GDD < 150fs42, thr >98%, front distortion < A/10,
surface 10-5 scratch-dig.
103 075,00 Kč
21 645,75 Kč
124 720,75 Kč
103 075,00 Kč
21 645,75 Kč
124 720,75 Kč
| FerntoOptics
0A228
0A228
achromatic waveplate A/2, 600 - 950 nm, free
aperture >= 21 mm, GDD < 150fs42, throughput >
98 %, wavefront distortion < A/10, surface 10-5
scratch-dig.
47
broadband waveplate
lambda/2, UV
h i plate A/2, ted, clear aperture 10 mm, 260 - 410
nm, surface aguality: 20-10 scratch-dig, damage threshold > 5 j/cm2 at
10 ns, 10 Hz.
22.093,00 Kč
4 639,53 Kč
26 732,53 Kč
44 186,00 Kč
9 279,06 Kč
53 465,06 Kč
Thortabs
AHWPOSM-
AHWPO5M-340
ate A/2, d, clear
aperture 10 mm, 260 - 410 nm, surface guality: 204
10 scratch-dig, damage threshold > 5 J/cm2 at 10
ns, 10 Hz.
48
M2, d, 1inch, clear aperture 22.6 mm,
hroarthand n
larmbda/2, VI5
400 - 800 nm, surface gualíty: 20-10 scratch-dig, damage threshold > 4
3/cmn2 at 10 ns, 10 Hz.
18 209,00 Kč
3 823,89 Kč
22 032,89 Kč
54 627,00 Kč
11471,67 Kč
66 098,67 Kč
Thorlabs
AHWPOSM-
600
AHWPO5M-600
achromatic waveplate A/2, mounted, 1 inch, clear
aperture 22.6 mm, 400 - 800 nm, surface guality:
20-10 scratch-dig, damage threshold > 5 J/cm2 at,
10 ns, 10 Hz.
49
broadband waveplate
lambda/2, ner IR
t plate A/2, 1, 1 inch, clear aperture 22,6 mm,
690 - 1200 nm, surface guality: 20-10 scratch-dig, damage threshold >
5 J/cm2 at 10 ns, 10 Hz.
18 209,00 Kč
3 823,89 Kč
22 032,89 Kč
54 627,00 Kč
11471,67 Kč
66 098,67 Kč [Thortabs
AHWPOSM-
AHWPO5M-S80
+ plate A/2, d, 1 inch, clear
aperture 22.6 mm, 690 - 1200 nm, surface ouality:
20-10 scratch-dig, damage threshold > 5 J/cm2 at
10 ns,10Hz.
broadband polarizer for fs
pulses
broadband thin film polarizer 600 - 900 nm, extinetion ratio < 2x109-2,
GDD < 150 fsA2, free aperture 19 mm, mount outer diameter 25 mm.
93 800,00 Kč
19 698,00 Kč
113 498,00 Kč
93 800,00 Kč
19 698,00 Kč
113 498,00 Kč |FemtoOptics
0A513
0A513
broadband thin film polarizer 600 - 900 nm,
extinction ratio < 2x10%-2, GDD < 150 fs%2, free
aperture 19 mrn, mount outer diameter 25 mm.
51
Holographie Wire Grid
Polarizar, A25 mm, Mountedí
KRS-5 Holographic Wire Grid 1 925 mm, M: d,
bettar than 1:100, transmission 3 - 30um > 70 %.
32 791,00 Kč
6 886,11 Kč
39 677,11 Kč
32 791,00 Kč
6886,11 Kč
39 677,11 Kč |Thorlabs
WP25H-K
WP25H-K
KRS-5 Holographic Wire Grid Polarizer, G25 mm,
Mounted, extinction better than 1:100,
transmission 3- 30 pm > 70 %.
52
Glan-Taylor Calcite
Polarizers, Uncoated, 10 mm
Glan-Taylor Design (Air-Spaced Birefringent Crystal Prisms), 10 mm,
uncoated, Wavefront Distortions A/4 Over Clear Aperture (Excluding
Side Ports), extinction 1: 100 000, 20-10 Scratch-Dig Surface Ouality on
Input and Exit Faces (80-50 on Side Ports).
12 455,00 Kč
2615,55 Kč
15 070,55 Kč
12 455,00 Kč
2615,55 Kč
15 070,55 Kč | Altechna
2-GL-3522-2
2-GL-3522-2
Glan-Taylor Design (Air-5paced Birefringent
Crystal Prisms), 10 mm, uncoated, Wavefront
Distortion s A/4 Over Clear Aperture (Excluding
Side Ports), extinction 1: 100 000, 20-10 Scratch-
Dig Surface Ouality on Input and Exit Faces (80-50|
on Side Ports).
53
Wollaston Prism, 20" Beam
Separation, 190 - 3500 nm
Uncoated a-3B0
Woillaston Prism, 20" Beam Separation, 190 - 3500 nm Uncoated a-
BBO, Separatas Unpolarized Light into Two Orthogonally Polarized
|Outputs with a 20“ Separation Angle.
19 768,00 Kč
4 151,28 Kč
23 919,28 Kč
39 536,00 Kč
8 302,56 Kč
47 838,56 Kč [Thortabs
WPA10
'WPA10
Wollaston Prism, 20* Beam Separation, 190 -
3500 nm U d a-BBO, Sep Unpolarizedi
Light into Two Orthogonally Polarized Outputs
with a 20* Separation Angle.
54
Glan-Taylor Calcite
Polarizers, Uncoated, 15 mm
Glan-Taylor Design (Air-Spaced Birefringent Crystal Prisms), 15 mm,
uncoated, Wavefront Distortion< A/4 Over Clear Aperture (Exciuding
Side Ports), extinction 1: 100 000, 20-10 Scratch-Dig Surface Ouality on
Input and Exit Faces (80-50 on Side Ports).
19 462,00 Kč
4 087,02 Kč
23 549,02 Kč
19 462,00 Kč
4 087,02 Kč
23 549,02 Kč |Altechna
2-GL-3522-4
2-GL-3522-4
Glan-Taylor Design (Air-Spaced Birefringent
Crystal Prisms), 15 mm, uncoated, Wavefront
Distortion < A/4 Over Clear Aperture (Excluding
Side Ports), extinction 1: 100 000, 20-10 Scratch-
Dig Surface Ouality on Input and Exit Faces (80-50
on Side Ports).
55
Microretarder Depotarizer
Array
convert a linearty polarized beam of llght into a pseudo-randorniy
polarized beam, AR coating 350 - 700 nm, 20-10 Scratch-Dig Surface
Ouality on Input and Exit Faces (80-50 on Skle Ports).
11 163,00 Kč
2344,23 Kč
13 507,23 Kč
11 163,00 Kč
2 344,23 Kč
13 507,23 Kč |Thorlabs
DPP25-A
DPP25-A
Microretarder Depolarizer Array, patterned
retarder designed to convert a Jinearty polarized
beam of light into a pseudo-randomiy polarized
beam, AR coating 350 - 700 nm, 20-10 Scratch-Dig|
Surface Ouality on input and Exit Faces (80-50 on
Side Ports).
56
broadband wire grid
polarizer
ultrabroadband wire grid polarizer, operating range: 250 nm - 4 um,
extinction: 250 nm - 4 im: >10:1, 300 nm - 4 um: >100:1, 600 nm -4
jsm: >1000:1, Clear Aperture: 019 mm, Thickness: 3.5 + 0.1mm,
mount outer diameter 25 mm.
17 644,00 Kč
3 705,24 Kč
21 349,24 Kč
88 220,00 Kč
18 526,20 Kč
106 746,20 Kč [Thorlabs
WP25M-UB
WP25M-UB
ultrabroadband wire grid polarizer, operating
range: 250 nm - 4 um, extinction: 250 nm - 4 im:
>10:1, 300 nm - 4 pm: >100:1, 600 nm - 4 pm:
>1000:1, Clear Aperture: 919 mm, Thickness: 3.5
z 0.1 mm, mount outer diameter 25 mm.
57
window 1" fusad zilica
window 1 Inch dlameter, 1 mm thick, fusad sliica, AR coated 650 -
1050 nm, surface auality 20-10 scratch-dig, surface flatness: A/4,
paralalism < 1 are min, damage threshold 7.5 J/cm2 at 810 nm, 10 ns.
1569,00 Kč
329,49 Kč
1 898,49 Kč
4 707,00 Kč
988,47 Kč
5 695,47 Kč |Altechna
Custom
dow 57
Custom window 57
window 1 inch diameter, 1 mm thick, fused silica,
AR coated 650 - 1050 nm, surface guality 20-10
tch-dig, surface fi : A/A, parallelism < 1
arc min, damage threshold 7.5 J/em2 at 810 nm,
10 ns.
58
window 1" fused silica
Window 1 inch diameter, 1 mm thick, fused silica, uncoated, surface
auality 20-10 scratch-dig, surface flatness: A/4, parallelísm < 1 arc min.
420,00 Kč
88,20 Kč
508,20 Kč
840,00 Kč
176,40 kč
1016,40 Kč |Altechna
Custom
window 58
Custom window 58
window 1 inch díameter, 1 mm thick, fused silica,
uncoated, surface guality 20-10 scratch-dig,
surface flatness: A/4, parallelism < 1 arc mín.
ss
window 1" fusad silica
window 1 inch diameter, 1 mm thick, fused silica, AR coated 350 - 700|
nm, surface guality 20-10 scratch-dig, surface flatness: A/4, parallelistm
< 1arc mín, damage threshold 7.5 J/cm2 at 532 nm, 10 ns,
2 209,00 Kč
463,89 Kč
2 672,89 Kč
2 209,00 Kč
463,89 Kč
2 672,89 Kč
Thortabs
WG41010-A
WG41010-A
[window 1 Inch dlameter, 1 mm thick, fused silica,
AR coated 350 - 700 nrm, surface guality 20-10
scratch-dlg, surface flatness: M/4, parallelism < 1
arc min, damage threshoki 7.5 i/cm2 at 532 nm,
10 ns.
window 1" fused silica
window linch diameter, imm thick, fused silica, AR coated 1050 -
1700 nm, surface guality 20-10 scratch-dig, surface flatness: A/4,
parallelism < 1 arc min, darnage threshold 7.5 J/cm2 at 1542 nm, 10
ns.
2 279,00 Kč
478,59 Kč
2 757,59 Kč
2 279,00 Kč
478,59 Kč
2 757,59 Kč
Thorlabs
WG41010-C
WG41010-C
window 1inch diameter, Imm thick, fused silica,
AR coated 1050 - 1700 nm, surface guality 20-10
scratch-dig, surface fatness: A/4, parallelism < 1
arc min, damage threshold 7.5 J/cm2 at 1542 nm,
10 ns.
61
window 1" MgF2
MgF2 window (81 Inch, 5 mm thick, uncoated, Surface Flatness (©
633 nm) A/8, Claar Aperture > 90% Dlameter.
5 233,00 Kč
1.098,93 Kč
633193 Kč
5 233,00 Kč
1098,93 Kč
6331,93 Kč
(Thortabs
WG61050
WG61050
MgF2 window (1 inch, 5 mrn thick, uncoated,
Surface Flatness (© 633 nm) A/8, Clear Aperture >
90% Diameter.
62
window 1" CaF2, 5 mm
CaF2 window (1 inch, 5 mm thick, uncoated, Surface Flatness (© 633
nm) A/8, Clear Aperture > 90 % Diameter,
2 674,00 Kč
561,54 Kč
3 235,54 Kč
2674,00 Kč
561,54 Kč
3 235,54 Kč
(Thorlabs
WG51050
WG51050
CaF2 window 1 inch, 5 mm thick, uncoated,
Surface Flatness (© 633 nm) A/8, Clear Aperture >
90 % Diameter.
window 1" CaF2, 2 mm
CaF2 window (91 Inch, 2 mm thick, uncoated, Surface Flatness (P 633
nm) M8, Clear Aperture > 90 % Diameter,
5 890,00 Kč
1236,90 Kč
7 126,90 Kč
5 890,00 Kč
1 236,90 Kč
7 126,90 Kč
Newport
10CF20
10CF20
CaF2 window (91 inch, 2 mm thick, uncoated,
Surface Flatness (© 633 nm) A/B, Clear Aperture >
90% Diameter.
window 1"sapphire
sapphire window (91 inch, 5 mm thick, uncoated, Surface Flatness (©
633 nn) A/8, Clear Aperture > 90 % Dlameter.
1.360,00 Kč
285,60 Kč
1645,60 Kč
1 360,00 Kč
285,60 Kč
1645,60 Kč
Eksma Optics
550-7255
550-7255
sapphire window 1 inch, 5 mm thick, uncoated,
Surface Flatness (© 633 nm) A/B, Clear Aperture >
90 % Diameter.
uncoatad
Remadhand i A
Ger F , d, 91 Inch, 5 mm
thick, Surface Flatness [© 633 nm) A, Clear Apertura > 90 % Diameter.
3 488,00 Kč
732,48 Kč
4 220,48 Kč
6 976,00 Kč
1.464,96 Kč
8 440,96 Kč
Thorlabs
WG91050
WG91050
bar Rrmarihand P:
Ger P
uncoated, 01 inch, 5 rn thick, Surface Fiatness
(© 633 nm) A, Clear Aperture > 90 % Dlameter.
window 1" germanium, 7 -
12 um coated
Bonadband D Wind
Germanium B: P AR Coated: 7-12 um, 91
inch, Smm thick, Surface Flatness (© 633 nrn) A, Clear Aperture > 90%
Diameter.
4 419,00 Kč
927,99 Kč
5 346,99 Kč
8 838,00 Kč
1 855,98 Kč
10 693,98 Kč
[Thorlabs
WG91050-G
WG91050-G
Germanium Broadband Precisi Jow, AR
Coated: 7 - 12 um, O1 inch, 5Smm thick, Surface
Flatness (© 633 nm) A, Clear Aperture > 90%
Diameter.
67
window 1" germanium, 1.9-
6 pm coated
Ger jum Broadband Precí dow, AR Coateď: 1,9- 6 pm, O1
inch, 5 mm thick, Surface Flatness (© 633 nm) A, Clear Aperture > 90
% Dlameter,
6744,00 Kč
1416,24 Kč
8 160,24 Kč
13 488,00 Kč
2832,48 Kč
16 320,48 Kč
(Thorlabs
WG91050-C9
'WG91050-c9
Ger Broadband Preci Window, AR
Coated: 1,9- 6 um, O1 inch, 5 mm thick, Surface
Flatness (© 633 nm) A, Clear Aperture > 90%
Diamater.
lens 2" f=500mm
lens (92 inch, plano-convex, fused silica, focal length "500 mm,
uncoated.
3114,00 Kč
653,94 Kč
3 767,94 Kč
6 228,00 Kč
1 307,88 Kč
7 535,88 Kč
Altechna
1-PCX-2-D508
1-PCX-2-D508
lens 92 inch, plano-convex, fused silica, focal
length “500 mm, uncoated.
lens 2" f=750mm
lens A2 Inch, plano-convex, fused silica, focal length "750 mm,
uncoated,
4 483,00 Kč
941,43 Kč
5424 43Kč
8 966,00 Kč
1892,86 Kč
10 848,86 Kč
Altechna
Custom lens
69
Custom lens 69
lens 92 inch, plano-convex, fused silica, focal
length T750 mm, uncoated.
70
lens 2" f=1000mm
lens 92 inch, plano-convex, fused silica, focal length “1000 mm,
uncoated.
3114,00 Kč
653,94 Kč
3 767,94 Kč
6 228,00 Kč
1307,88 Kč
7 535,88 Kč
Altechna
1-PCX-2-E508
1-PC2-E508
lens 92 inch, plano-convex, fused silica, focal
length “1000 mm, uncoated.
n
lens 1" fa75mm
lens 93 Inch, plano-convex, AR coated 350 - 900 nm, fused sllica,
ultrathin (central thickness < 3 mm), focal length 75 mm.
3 808,00 Kč
799,68 Kč
4 607,68 Kč
19 040,00 Kč
3 998,40 Kč
23 038,40 Kč
Eksma Optics
110-
1209£T+UBB
AR
110-1209ET+UBBAR
lens (91 inch, plano-convex, AR coated 350 - 900
nm, fused silica, ultrathin (central thickness < 3
mm), focal length 75 mm.
7
lens 1" f=100mm, extended
VIS coated
lens 91 inch, plano-convex, AR coated 350 - 900 nm, fused silica,
ultrathin (central thickness < 3 mm), focal length 100 mm.
3.808,00 Kč
799,68 Kč
4 607,68 Kč
19 040,00 Kč
3 998,40 Kč
23 038,40 Kč
Eksrna Optics
110-
1211ET+UBB
AR
110-1211ET+UBBAR
lens 91 inch, plano-convex, AR coated 350 - 900
nm, fused silica, ultrathin (central thickness < 3
mm), focal length 100 mm.
73
lens 1" fe200mm
lans 81 Inch, plano-convex, AR coated 350 - 900 nm, fused stllca,
ultrathin (central thicknass < 3 mm), focal length 200 mm.
3 804,00 Kč
799,68 Kč
4 607,68 Kč
19 040,00 Kč
3 994,40 Kč
23 038,40 Kč
Eksma Optics
110-1219ET+UBBAR
lens 91 inch, plano-convex, AR coated 350 - 900
nm, fused silica, ultrathin (central thickness < 3
mm), focal length 200 mm.
110-
1219ET+UBB8
AR
74
lens 1" f=300mm
lens 1 inch, plano-convex, AR coated 350 - 900 nm, fused silica,
ultrathin, focal length 300 mm.
3.808,00 Kč
799,68 Kč
4 607,68 Kč
19 040,00 Kč
3 998,40 Kč
23 038,40 Kč
Eksma Optics
110-1223ET+UBBAR
lens 1 inch, plano-convex, AR coated 350 - 900
nm, fused silica, ultrathin, focal length 300 mr.
110-
1223ET+UBB
AR
75
lens 1" faSn0mm
lens 01 inch, plano-convax, AR coated 350 - 900 nm, fused silica,
uitrathin (central thickness < 3 men), focal length 500 mn.
3 808,00 Kč
799,68 Kč
4 607,68 Kč
19 040,00 Kč
3 998,40 Kč
23 038,40 Kč
Eksma Optics
110-1233ET+UBBAR
lens 1 inch, plano-convex, AR coated 350 - 900
nm, fused silica, ultrathin (central thickness < 3
mm), focal length 500 mm.
110-
1233ET+UBB
AR
76
lens 1" f=50mm
lens 91 inch, plano-convex, uncoated, fused silica, foca! length 50 mm,
Surface Flatness (Plano Side) A/2, Spherical Surface Power (Convex
Side) 3W/2, Surface Irregularity (Peak to Valley) A/4.
1 246,00 Kč
261,66 Kč
1507,66 Kč
4 984,00 Kč
1046,64 Kč
6 030,64 Kč
Altechna
1-PCX-2-B254
lens 91 inch, plano-convex, uncoated, fused silica,
focal length 50 mm, Surface Flatness (Plano Side)
M/2, Spherical Surface Power (Convex Side) 3A/2,
Surface Irregularity (Peak to Valley) A/4.
1-PCX-2-B254
lens 1" f=75mm
lens 1 inch, plano-convex, uncoated, fusad silica, focal langth 75 mm,
Surface Flatness (Plano Side) A/2, Spherical Surface Power (Convex
Side) 3A/2, Surface Irregularity (Peak to Valley) A/4.
1 246,00 Kč
261,66 Kč
1507,66 Kč
2 492,00 Kč
523,32 Kč
3015,32 Kč
Altechna
1-POC2-D254
lens (91 inch, plano-convex, uncosted, fused silica,
focal length 75 mm, Surface Flatness (Plano Side)
N2, Spherical Surface Power (Convex Side) 3A/2,
Surface Irregularity (Peak to Valley) A/4.
1-PCX-2-D254|
78
lens 1" f=100mm, uncoated
lens ©1 inch, plano-convex, uncoated, fused silica, focal length 100
mm, Surface Flatness (Plano Side) A/2, Spherical Surface Power
(Convex Side) 3A/2, Surface Irregularity (Peak to Valley) A/4.
1 246,00 Kč
261,66 Kč
1507,66 Kč
4 984,00 Kč
1. 046,64 Kč
6 030,64 Kč
Altechna
1-PCX-2-E254
lens 91 Inch, plano-convex, uncoated, fused silica,
focal length 100 mm, Surface Flatness (Plano
Side) A/2, Spherical Surface Power (Convex Side)
3A/2, Surface Irregularity (Peak to Valley) A/4.
1-PCX-2-E254
lens 1" f=200mm
lens B2 Inch, plano-convex, uncoated, fusad sllica, focal length 200
mm, Surface Flatnass (Plano Side) A/2, Sphericel Surface Power
(Convex Skde) 3A/2, Surface Irregularity (Peak to Valley) A/4,
1 246,00 kč
261,66 Kč
1507,66 Kč
4 984,00 Kč
1046,64 Kč
6030,64 Kč
Altechna
1-PO62-H254
lens A1 inch, plano-convex, uneoated, fusad silica,
focal length 200 mm, Surface Fiatness (Plano
Side) A/2, Spherical Surface Power (Convex Side)
3A/2, Surface Irregufartty (Paak to Valley) A/4.
1-PCX-2-H254|
lens 1" f=250mm
lens (91 inch, plano-convex, uncoated, fused silica, focal length 250
mm, Surface Flatness (Plano Side) A/2, Spherical Surface Power
(Convex Side) 3A/2, Surface Irregularity (Peak to Valley) A/4.
1.246,00 Kč
261,66 Kč
1507,66 Kč
2.492,00 Kč
523,32 Kč
3015,32 Kč
Altechna
1-PCX2-J254
lens A1 inch, plano-convex, uncoated, fused silica,
focal length 250 mm, Surface Flatness (Plano
Side) A/2, Spherical Surface Power (Convex Side)
34/2, Surface irregularity (Peak to Valley) A/4.
1-PCX-2-3254
Bi
lens 1" f=400mm
lens 91 Inch, plano-convax, uncoated, fused silica, focal length 300
mm, Surface Flatness (Plano Sida) A/2, Spherical Surface Power
(Convex Skle) 34/2, Surface Irregularity (Peak to Valley) A/4.
1 246,00 Kč
261,66 Kč
1507,66 Kč
4 984,00 Kč
1046,64 Kč
6 030,64 Kč
Altechna
1-PO*2-K254
lens 91 inch, plano-convex, uncoated, fused silica,
focal length 300 mm, Surface Flatness (Plano
Side) A/2, Spherical Surface Power (Convex Side)
34/2, Surface Irregularity (Peak to Valley) A/4.
1-PCX-2-K254
82
lens 1" f=500mm
lens 91 inch, plano-convex, uncoated, fused silica, focal length 500
mm, Surface Flatness (Plano Side) A/2, Spherical Surface Power
(Convex Side) 3A/2, Surface Irregularity (Peak to Valley) A/4.
1.246,00 Kč
261,66 Kč
1.507,66 Kč
4 984,00 Kč
1.046,64 Kč
6 030,64 Kč
Altechna
1-PCX-2-M254
lens 1 inch, plano-convex, uncoated, fused silica,
focal length 500 mm, Surface Flatness (Plano
Side) A/2, Spherical Surface Power (Convex Side)
3W/2, Surface Irregularity (Peak to Valley) A/4.
lens 1" fe50mm
lens A1 inch, plano-convex, 650-1050 nm AR coated, fused silica, foca
length 50 mm, Surface Flatness (Plano Side) A/2, Spherical Surface
Power [Convex Site) 3A/2, Surface Irregutlarity (Peak to Valley) A/4,
2 335,00 Kč
490,35 Kč
2 825,35 Kč
2 335,00 Kč
490,35 Kč
2 825,35 Kč
1-PC%2-B254-[7800]
fens 51 inch, plano-convex, 650-1050 nm AR
1-PCX-2-82544coatad, fusad silica, focal length 50 mrn, Surface
Flatness (Plano Sida) A/2, Spherical Surface Power
(Convex Side) 3M/2, Surface Irregutarity (Peak to
Valley) A/4.
lens 1" f=75mm
lens 1 inch, plano-convex, 650-1050 nm AR coated, fused silica, focal
length 75 mm, Surface Flatness (Plano Side) X/2, Spherical Surface
Power (Convex Side) 3XA/2, Surface Irregularity (Peak to Valley) A/4.
2 335,00 Kč
490,35 Kč
2 825,35 Kč
2 335,00 Kč
490,35 Kč
2 825,35 Kč
Altechna
1-PCX-2-D254.
[7800]
1-PCX-2-D254-[7B800]
lens 1 inch, plano-convex, 650-1050 nm AR
coated, fused silica, focal length 75 mm, Surface
Flatness (Plano Side) A/2, Spherical Surface Power|
(Convex Side) 3A4/2, Surface irregularity (Peak to
Valley) M/4.
85
lens 1* fs100mm
lens B1 inch, plano-convex, 650-1050 nm AR coated, fused silica, focai|
length 100 mm, Surface Flatness (Plano Skde) A/2, Spherical Surface
Power (Convex Skle) 3A/2, Surface Irregularity (Peak to Valley) A/4.
2 335,00 Kč
490,35 Kč
2 825,35 Kč
4 670,00 Kč
980,70 Kč
5 650,70 Kč
Altechna
1-PCX-2-E2544
1-PCX-2-E254-[7B00]
lens 91 inch, plano-convex, 650-1050 nm AR
coateďd, fused silíca, focal length 100 mm, Surface
Flatness (Plano Side) A/2, Spherical Surface Power|
(Convex Skle) 3A/2, Surface Hregularity (Poak to
Valley) M/4.
86
lens 1* f=200mm
lens 1 inch, plano-convex, 650-1050 nm AR coated, fused silica, focal|
length 200 mm, Surface Flatness (Plano Side) X/2, Spherical Surface
Power (Convex Side) 3A/2, Surface Irregularity (Peak to Valley) XM/4.
2 335,00 Kč
490,35 Kč
2 825,35 Kč
4670,00 Kč
980,70 Kč
5 650,70 Kč
Altechna
1-PCX-2-H254.
[7B00]
1-PCX-2-H254-[7B00]
lens 1 inch, plano-convex, 650-1050 nm AR
coated, fused silica, focal length 200 mm, Surface
Flatness (Plano Side) A/2, Spherical Surface Powerf
(Convex Side) 3X/2, Surface Irregularity (Peak to
Valley) A/4.
a7
lens 1" f=250mm
lens 11 Inch, plano-convex, 650-1050 nm AR coated, fused silica, foca|
length 250 mm, Surface Flatness (Plano Side) A/2, Spherical Surface
Power (Convex Side) 3A/2, Surface Irregutarity (Peak to Valley) A/4.
2 335,00 Kč
490,35 Kč
2825,35 Kč
2 335,00 Kč
490,35 Kč
2825,35 Kč
Altechna
1-PCX-2-1254-].
[7B00]
1-POX-2-1254-[7B00]
lens Miinch, plano-convex, 650-1050 nm AR
coated, fused silíca, focal length 250 mm, Surface
Flatness (Plano Side) AM2, Spherical Surface Powerf
(Convex Side) 3A/2, Surface Irregularity (Peak to
Valley) A/4.
lens 1" f=300mm
lens 81 inch, plano-convex, 650-1050 nm AR coated, fused silica, focal|
length 300 mm, Surface Flatness (Plano Side) X/2, Spherical Surface
Power (Convex Side) 3A/2, Surface Irregularity (Peak to Vailey) A/4.
2 335,00 Kč
490,35 Kč
2825,35 kč
2 335,00 Kč
490,35 Kč
2825,35 Kč
Altechna
1-PCX-2-K254
1-PCX-2-K254-[7B00]
lens 1 inch, plano-convex, 650-1050 nm AR
coated, fused silica, focal length 300 mm, Surface
Flatness (Plano Side) A/2, Spherical Surface Powerl
(Convex Side) 3A/2, Surface Irregularity (Peak to
Valley) A/4.
OAP1" UV anhancad Aluminium
fe4!
Off-axis parabotic mirror 90 deg, Jinch diameter, UV-Enhanced
Aluminum coating, affective focaj length 4", Surface Roughness: <100
A (RM5), Clear Aparture: > 90 % of Diameter,
3721,00 Kč
781,41 Kč
4 502,41 Kč
3721,00 Kč
781,41Kč
4502,41Kč
Thoriabs
MPD149-F01
MPD149-F01
Off-axis parabolic mirror 90 deg, tinch dlameter,
UV-Enhanced Aluminum coating, effective focal
length 4“, Surface Roughness: <100 A (RMS),
Clear Aperture: > 90 % of Diameter.
OAP1" gold f=2"
Off-axis parabolic mirror 90 deg, 1 Inch diameter,Protected Gokd
coating, effective focal length 2", Surface Roughness: < 100 A (RMS),
Clear Aperture: > 90 % of Diameter.
4419,00 Kč
927,99 Kč
5 346,99 Kč
4 419,00 Kč
927,99 Kč
5 346,99 Kč
Thorlabs
MPD129-M01)
MPD129-M01
Off-axis parabolic mirror 90 deg, 1 inch
diameter,Protected Gold coating, effective řocal
length 2", Surface Roughness: < 100 A (RMS),
Clear Aperture: > 90 % of Diameter.
91
OAP1" gold f=4"
Off-axis parabolic mirror 90 deg, 1 Inch dlameter, Protected Gold
coating, effective focal length 4", Surface Roughness: < 100 A (RMS),
Clear Aperture: > 90 % of Diameter.
4419,00 Kč
927,99 Kč
5 346,99 Kč
4419,00Kč
927,99 Kč
5 346,99 Kč
Thoriabs
MPD149-M01|
MPD149-M01
Off-axis parabolic mirror 90 deg, 1 Inch dlameter,
Protected Gotd coating, effective focal length 4",
Surface Roughness: < 100 A (RMS5), Claar
Aperture: > 90 % of Diameter.
92
OAP1" gold f=6"
Off-axis parabolic mirror 90 deg, 1 inch diameter,Protected Gold
coating, effective focal length 6", Surface Roughness: < 100 A (RMS),
Clear Aperture: > 90 % of Diameter.
4419,00 Kč
927,99 Kč
5 346,99 kč
4419,00 Kč
927,99 Kč
5 346,99 Kč
Thorlabs
MPD169-M01|
MPD169-M01
Off-axis parabolic mirror 90 deg, 1 inch
diameter,Protected Gokd coating, effective řocal
length 6", Surface Roughness: < 100 A (RMS),
Ciear Aperture: > 90 % of Diameter.
93
OAP1"gokd f-200mm
Off-axis parabolic mirror 90 deg, linch diameter, Protected Gold
coating, effective focal length 200 mm, Surface Roughness: < 175 A
(RMS), Surface Figure, RMS XA, Clear Aperture: > 90 % of Diameter.
6 664,00 Kč
1 399,44 Kč
8 063,44 Kč
6 664,00 Kč
1399,44 Kč
8 063,44 Kč
Edmund
Optics
83-974
B83-974
Off-axis parabolic mirror 90 deg, linch dlamot;:),oJ
Protected Gold coating, effective focal length
mm, Surface Roughness: < 175 A (RMS), Surface
Figure, RMS XA, Clear Aperture: > 90 % of
Diameter.
beamsplitter (92 inch, split ratio 50:50, fused silica, coating 350 - 1100;
nm, thickness 8 mm, Damage Threshold > 10 J/cm2 (810 nm, 10 ns,
10 Hz, (90.130 mm), Splitter Ratio Tolerance £ 12 % Over Entire
Wavelength Range.
beamsplitter 2" 50:50
7 302,00 kč
1533,42 Kč
8 835,42 Kč
14 604,00 Kč
3 066,84 Kč
17 670,84 Kč |Thorlabs
BSW27
BSW27
beamsplitter 2 inch, split ratio 50:50, fused
silica, coating 350 - 1100 nm, thickness 8 mm,
Damage Threshold > 10 J/cm2 (810 nm, 10 ns, 10j
Hz, (0.130 mm), Splitter Ratio Tolerance + 12%
Over Entire Wavelength Range.
beamsplitter 91 inch, matrtal: Calcium Fluoride, for range 2 - 8m,
50:50 split ratio (+-10%6), thickness 5 mm, for S/P-Potarized Light
Incident at 45*, Surface Fiatness < 3A Ovar Clear Aperture 22.86
mm).
beamsplittar 1" 50:50 mii-IR
6512,00 Kč
1367,52 Kč
7 879,52 Kč
13 024,00 Kč
2 735,04 Kč
15 759,04 Kč | Thortabs
BSWS10
BSW510
t fitter 51 inch, al: Calcium Fluoride,
for range 2 - 8 um, 50:50 split ratio (+-10%),
thickness S mm, for S/P-Potarized Light Incident at
45", Surface Flatness < 3A Over Clear Aperture
(922.86 mn).
96
bearnsplitter 41 inch, low GDD, for range 600 - 1500 nm optimized for
beamsplitter 1" 50:50 Ti:Sapphire and Yb Lasers, 50:50 split ratio, thickness 1.5 mm, for P-
Ti hi i d Pol j Light dent at 45*, Surface Flatness < 3A Over Clear
Aperture (80 % of diameter).
5 814,00 Kč
1.220,94 Kč
7 034,94 Kč
23 256,00 Kč
4 883,76 Kč
28 139,76 Kč | Thorlabs
UFBS5050
UFBS5050
beamsplitter 91 inch, low GDO, for range 600 -
1500 nm optimized for Ti:Sapphire and Yb Lasers,
50:50 split ratio, thickness 1.5 mm, for P-Polarized
Light Incident at 45", Surface Flatness < 3A Over
Clear Aperture (80 % of diameter).
97
beamsplitter 2 Inch, split ratio 90:10 R:T, fused silica, coating 700 -
1100 nm, thickness 8 mm, Damage Threshold > 10 j/cm2 (810 nm, 10l
ns, 10 Hz, (90,130 mm), Splitter Ratio Tolerance +12 % Over Entire
Wavelength Range.
baamsplitter 2" 90:10
4 302,00 Kč
903,42 Kč
5 205,42 Kč
8 604,00 Kč
1 806,84 Kč
10 410,84 Kč |Thorlabs
BSX17
BSX17
beamsplitter 92 inch, split ratio 90:10 R:T, fused
sllica, coating 700 - 1100 nm, thickness 8 mm,
Damage Threshold > 10 J/cm2 (B10 nm, 10 ns, 10
Hz, 90.130 mm), Splitter Ratio Tolerance +12%
Over Entire Wavelength Range.
beamsplitter 91 inch, split ratio 90:10 R:T, fused silica, coating 700 -
1100 nm, thickness 5 mm, Damage Threshold > 10 J/cm2 (810 nm, 10
ns, 10 Hz, (90.130 mm), Splitter Ratio Tolerance +12 % Over Entire
Wavelength Range.
bearmsplitter 1" 90:10
2 674,00 Kč
561,54 Kč
3 235,54 Kč
10 696,00 Kč
2 246,16 Kč
12 942,16 Kč [Thortabs
BSX11
BSX11
bearnsplitter 91 inch, split ratio 90:10 R:T, fused
silica, coating 700 - 1100 nm, thickness 5 mm,
Damage Threshold > 10 J/cm2 (810 nm, 10 ns, 10|
Hz, (80.130 mm), Splitter Ratio Tolerance +12%
Over Entire Wavelength Range.
beamsplitter 1 Inch, split ratio 70:30 R:T, fused silica, coating 700 -
1100 nm, thickness 5 mrn, Damage Threshold > 10 J/cm2 (810 nm, 10j
ns, 10 Hz, (90.130 mn), Splitter Ratlo Tolerance +12 % Over Entire
Wavelength Range,
beamsplitter 1" 70:30
2 186,00 Kč
459,06 Kč
2 645,06 Kč
4 372,00 Kč
918,12 Kč
5 290,12 Kč |Thorlabs
BST11
beamsplitter 1 inch, split ratio 70:30 R:T, fused
silica, coating 700 - 1100 nm, thickness 5 mm,
Darnage Threshold > 10 J/cm2 (810 nm, 10 ns, 10|
Hz, (60.130 mm), Splitter Ratio Tolerance +12%
Over Entire Wavelength Range.
100
wedge D1 inch, uncoated, 4 [round wedge prism, (91 inch, uncoated, 4 deg Beam Deviation,
deg Beam Deviation Material N-BK7, Surface Flatness A/10 at 633 nm, uncoated.
12
1457,00 Kč
305,97 Kč
1 762,97 Kč
17 484,00 Kč
3671,64 Kč
21 155,64 Kč |Altechna
Custom
wedge 100
Custom wedge 100
round wedge prism, Ó1 inch, uncoated, 4 deg
Beam Deviation, Material N-BK7, Surface Flatnessi
M/10 at 633 nm, uncoated.
10
beam sampler - wedge, 01 Inch, 350-700 coated (reflatance 0,5-1 % In
beam samplar VIS, 0,5% thla range), 5 mm Thick, damage treshold 7.5 J/cm2 (532 nm, 10 ns,
sample 10 Hz, 90,491 mm), Surface FlatnassX/B © 633 nm Over the Clear
Apartur,
1426,00 Kč
299,46 Kč
1725,46 Kč
5 704,00 Kč
1197,84 Kč
6 901,84 Kč [Thorlabs
BSF10-A
B5F10-A
beam sampler - wedge, G1 inch, 350-700 coated
Irafletance 0,5-1 % In this range), 5 mm Thick,
damage treshold 7.5 J/cm2 (532 nm, 10 ns, 10
Hz, (90.491 mm), Surface Flatnessi/B © 633 nm
Over the Clear Apertur.
102
beam sampler - wedge, (51 inch, 650-1050 coated (refletance 0,4-0,7
bearn sampler near-IR, 0,5 % /% in this range), S mm Thick, damage treshokd 7.5 4/cm2 (810 nm, 10
sample ns, 10 Hz, (90.491 mrn), Surface Flatnessi/8 © 633 nm Over the Clear
Apertur.
1.426,00 Kč
299,46 Kč
1 725,46 Kč
5 704,00 Kč
1197,84 Kč
6901,84 Kč [Thortabs
BSF10-B
BSF10-B
beam sampler - wedge, O1 inch, 650-1050 coated|
(refletance 0,4-0,7 % in this range), 5 mm Thick,
damage treshold 7.5 J/cm2 (810 nm, 10 ns, 10
Hz, (90.491 mm), Surface FlatnessA/8 © 633 nm
Over the Clear Apertur.
103
variable cireuler continuous
ND fiiter 100 mm max OD 4
Circular, C ty Variabie, Refli Neutral Density Filter for
vio , d 100 mm, Optical density range 0-4,
Onptical Dansity Tolerance +5 % (At Both Extremes) , mounted (on
rotation axis attatched to 1/2 Inch post), Spectral Range 240 - 1200 nm;
(uncoated).
10 560,00 Kč
2217,60 Kč
12 777,60 Kč
63 360,00 Kč
13 305,60 Kč
76 665,60 Kč
100FS04DV.4 |
+ FR—CV-75
100FS04DV.4 + FR-CV-75
Circular, Contk k Varlable, Reflective N
Denstity Filter for atenuation vía rotation,
diameter 100 mm, Optical density range 0-4,
Optical Density Tolerance +5 % (At Both Extremes)
; 1 (on axis hed to 1/2 inch
post), Spectral Range 240 - 1200 nm (uncoated).
104
variable circuler continuous
ND filter 100 mm max OD 2
Circular, C ly Variable, Refl. Neutral Density Filter for
via d 100 mm, Optical density range 0-2,
Optical Density Tolerance +5 % (At Both Extremes), mounted (on
rotation axis attatched to 1/2 inch post), Spectral Range 240 - 1200 nm
(uncoated).
10 560,00 Kč
2217,60 Kč
12 777,60 Kč
63 360,00 Kč
13 305,60 Kč
76 665,60 Kč
Newport
100FS02DV.2
100FS02DV.2
Circular, C k Variable, Refl
Density Filter for atenuation via rotation,
diameter 100 mm, Optical density range 0-2,
Optical Density Tolerance +5 % (At Both Extremes)|
m d (on axis hed to 1/2 inch
post), Spectral Range 240 - 1200 nm (uncoated).
105
varlable cireuler continuous
ND filter 50 mm mnax OD 2
Cireular, C ly Variabla, Reflective N | Density Filter for
vla , d 50 mm, Optical density range 0-4,
Optical Density Tolerance £5 % (At Both Extremes), mounted (on
rotation axis attatched to 1/2 inch post), Spectral Range 240 - 1200 nm
(uncoated).
8 181,00 Kč
1718,01 Kč
9 899,01Kč
24 543,00 Kč
5 154,03 Kč
29 697,03 Kč
Newport
50FS04DV.4
50F504DV.4
Circutar, Contii y Variable, Refil
Density Filter for atenuation vía rotation,
diameter 50 mm, Optical density range 0-4,
Optical Density Tolerance +5 % (At Both Extremes)|
: j (on axis hed to 1/2 Inch
post), Spectral Range 240 - 1200 nm (uncoated).
106
c y Variable ND
Filter, 25 mm x 100 mm, OD:
0.04-2.0
c ly Variable ND Filter, 25 x 100 mm, linear distribution OD:
0.04 - 2.0, Optical Density Tolerance +5 % (At Both Extremes) , Spectrd
Range 240 - 1200 nm (uncoated).
2 326,00 Kč
488,46 Kč
2814,46 Kč
4 652,00 Kč
976,92 Kč
5 628,92 Kč
Thorlabs
NDL-25C-2
NDL-25C-2
Continuously Variable ND Filter, 25 x 100 mm,
linear distribution OD: 0.04 - 2.0, Optical Density
Tolerance +5 % (At Both Extremes) , Spectral
Range 240 - 1200 nm (uncoated).
107
refitective ND filter OD=1
(1 inch unmounted UV Fused Silíca Refiective ND Filters Optical
jdensity = 1, Substrate Materiat UV-Fused Silica, Spectral Range 200 -
1200 nm, Thickness 1 mm, Surface Accuracy © 633 nm<5A.
1.099,00 Kč
230,79 Kč
1 329,79 Kč
3 297,00 kč
692,37 Kč
3 989,37 Kč
Thoriabs
NDUV108
NDUV108
81 inch unmounted UV Fused Sílica Reflective NDÍ
Filters Optical density = 1, Substrate Material UV-
Fused Silica, Spectral Range 200 - 1200 nm,
Thickness 1 mm, Surface Accuracy © 633 nm < 5
A
108
lens achromatic f=60mm
unmounted achromatic dublets (lense), 8025.4 mm, Design
Wavelengths 706.5 nm, 855 nm, and 1015 nm,AR coating for 650-
1050 nm (les than 0.5 % reflectance), f=60 mm, focal length shift in
650-1050 nm range < 0.3 mm.
1 988,00 Kč
417,48 Kč
2405,48 Kč
3976,00 Kč
834,96 Kč
4810,96 Kč
Thoriabs
AC254-060-B
AC254-060-B
unmounted achromatic dublets (lense), $625.4
mm, Design Wavelengths 706.5 nm, 855 nm, and|
1015 nm,AR coating for 650-1050 nm (les than
0.5 % reflectance), f=60 mm, focal length shift in
650-1050 nm range < 0.3 mm.
109
lens achromatie fe500mm
unmounted achromatic dublets (Iense), 825.4 mm, Dasign
Wavelengths 706,5 nm, 855 nm, and 1015 nm,AR coating for 650-
1050 nm (les than 0.5 % reflectance), f=500 mm, focal length shift in
650-1050 nm range < 0.3 mm,
1 988,00 Kč
417,48 Kč
2405,48 Kč
3 976,00 Kč
8834,96 Kč
4810,96 Kč
Thortabs
AC254-500-B
AC254-500-B
unmounted achromatic dubilets (lense), 9625.4
mm, Design Wavelengths: 706.5 nm, 855 nm, and
1015 nm,AR coating for 650-1050 nm (les than
0.5 % reflectance), f=500 mm, focal length shift in
650-1050 nm range < 0.3 mm.
110
lens achromatic f=200mm
d ach dublets (lense), 925.4 mm, Design
Wavelengths 486.1 nm, 587.6 nm, and 656.3 nm, AR coating for 400-
700 nm (les than 0.5% refliectance), f=500 mm, focal length shift in 4504
700 nm range < 0.3 mm.
1707,00 Kč
358,47 Kč
2065,47 Kč
3414,00 Kč
716,94 Kč
4 130,94 Kč
Thorlabs
AC254-200-A
AC254-200-A
unmounted achromatic dublets (lense), 925.4
mm, Design Wavelengths 486.1 nm, 587.6 nm,
and 656.3 nm, AR coating for 400-700 nm (les
than 0.5% reflectance), f=500 mm, focal length
shift in 450-700 nm range < 0.3 mm.
111
compresor grating 1200
g/mm
compresor grating golden 1200 groves/mm, diameter 50x50x10, NIR
(800 nm optimized), Expected efficiency (TM/-1) © Dev 8 deg > 90 %.|
27 875,00 Kč
5 853,75 Kč
33 728,75 Kč
55 750,00 Kč
11 707,50 Kč
67 457,50 Kč
Spectrogon
715.700.640
|diameter 50x50x10, NIR (800 nm optimized),
715.700.640
compresor grating goklen 1200 groves/mm,
Expected efficiency (TM/-1) © Dev 8 deg > 90 %.
112
Ruled Reflective Grating,
400nm blaze, 1200g/mm
Ruled Reflective Grating, 400 nm blaze, 1200 g/mm, 25 x 25 x 6 mm(+]
1 mm), efficiency at 400 nm > 65 %.
2442,00 Kč
512,82 Kč
2954,82 Kč
4 884,00 Kč
1025,64 Kč
5 909,64 Kč
Thorlabs
GR25-1204
GR25-1204
Ruled Reflective Grating, 400 nm blaze, 1200
g/mm, 25 x 25 x 6 mm (+- 1 mm), efficiency at 400
nm > 65 %.
133
UV Refl Holograph
Grating, 1800g/mm
UYV Reft Holograph €, 1800/mm, 25 x 25 x6 mm (+- 1
mm), efficiency at 260-295 nm > 60 %.
3 047,00 Kč
639,87 Kč
3 686,87 Kč
6 094,00 Kč
1279,74 Kč
7373,74 kč
Thoriabs
GH25-18H
GH25-18H
UV Reflective Holographic Grating, 1800/mm, 25
x 25 x 6 mm (+- 1 mm), efficiency at 260-295 nm >
60%.
114
2700 g/mm plane ruled
reflection grating with 20%
nominal blaze angle,
optimized for 259 nm
2700 g/mm plane ruled reflection grating with 20* nominal blaze
angle, optimized for 259 nm, groove length: 102 mm ruled width: 34
mm, efficiendy at 259 nm >80 %.
120 375,00 Kč
25 278,75 kč
145 653,75 Kč
120 375,00 Kč
25 278,75 Kč
145 653,75 kč
Newport
Richardson
Gratings
53-*—021R
53-*-021R
2700 g/mm plane ruled reflection grating with 20%
nominal blaze angle, optimized for 259 nm,
groove length: 102 mm ruled width: 34 mm,
efficiendy at 259 nm >80 %.
115
Visible interference Bandpass)
Filter Kit (10 nm FWHM),
Mounted, Set of 10
Visibie Bandpass Filter Kit (10 nm FWHM), Mounted,01", Minimum
Clear Aparture 821 mm, Thickness < 6.3 mm, minimal transmission at|
center 35 %, Out of Band Transmission <0.01% from 200 nm to 3.0
jim, Set of 10: 350 nm, 400 nm, 450 nm, 500 nm, 550 nm, 600 nm,
'650 nm, 700 nm, 750 nm, 800 nm.
21677,00 Kč
4 552,17 Kč
26 229,17 Kč
21 677,00 Kč
4 552,17 Kč
26 229,17 Kč
Thorlabs
FKB-VIS-10
FKB-VIS-10
Visible Bandpass Fiiter Kit (10 nm FWHM),
Mounted,$1", Minimum Clear Aperture 821
mm, Thickness < 6.3 mm, minimal transmission atj
center 35 %, Out of Band Transmission <0.01%
from 200 nm to 3.0 jim, Set of 10: 350 nm, 400
nm, 450 nm, 500 nm, 550 nm, 600 nm, 650 nm,
700 nm, 750 nm, 800 nm.
116
$25 mm Colored Glass Filter
Kit, Set of 10
$25 mm Colored Glass Filter Kit, Set of 10: 400 nm Longpass, 495 nm
Longpass, 550 nm Longpass, 610 nm Longpass, 715 nm Longpass, 780
nm Longpass, 850 nm Longpass, 315 - 710 nm Bandpass, 335 - 610 nmj
Bandpass, 325 - 385 nm Bandpass.
9 854,00 Kč
2069,34 Kč
11 923,34 Kč
9 854,00 Kč
2069,34 Kč
11923,34 kKč
Thoriabs
FGK01
FGK01
25 mm Colored Glass Filter Kit, Set of 10: 400
nm Longpass, 495 nm Longpass, 550 nm
Longpass, 610 nm Longpass, 715 nm Longpass,
780 nm Longpass, 850 nm Longpass, 315 - 710
nm Bandpass, 335 - 610 nm Bandpass, 325 - 385
nm Bandpass.
117
425 mm Colored Glass Filter
Kit, Set of 10
825 mm Colored Glass Fiiter Kit, Set of 10: 400 nm Longpass, 495 nm
Longpass, 550 nm Longpass, 610 nm Longpass, 715 nm Longpass, 780
nm Longpass, 8450 nm Longpass, 315 - 710 nm Bandpass, 335 - 610 nmíj
Bandpass, 325 - 385 nm Randpass,
9 854,00 Kč
2069,34 Kč
11 923,34 Kč
9 854,00 Kč
2 069,34 Kč
11 923,34 Kč
Thorlabs
FGK01
FGK01
425 mm Colored Gtass Filter Kit, Sat of 10: 400
nm Longpass, 495 nm Longpass, 550 nm
Longpass, 610 nm Longpass, 715 nm Longpass,
780 nm Longpass, 850 nm Longpass, 315 - 710
nm Bandpass, 335 - 610 nm Bandpass, 325 - 385
nm Bandpass.
118
$25 mm reflective ND filter
kit, set of 10
W25 mm reflective ND filter kit, Box with 10 UVFS (substrate
transmission 200- 1100 nm) Reflective 25 mm mounted ND Filters,
inclooded OD: 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 1.0, 2.0, 3.0, 4.0.
14 724,00 Kč
3092,04 Kč
17 816,04 Kč
14 724,00 Kč
3092,04 Kč
17 816,04 Kč
Thortabs
NUKO1
NUK01
W25 mm reflective ND filter kit, Box with 10 UVFS
(substrate transmission 200- 1100 nm) Reflective
($25 mm mounted ND Filters, inclooded OD: 0.1,
0.2,0.3, 0.4, 0.5, 0.6, 1.0, 2.0, 3.0, 4.0.
119
W1" Bandpass Filter, CWL =
250 + 2 nm, FWHM = 10+ 2
nm
(H1" Bandpass Filter, CWL = 350 t 2 nm, FWHM = 10 + 2 nm, min
Transmission 25 %, biocking 200-3000 nm 0D >4.
3.070,00 Kč
644,70 Kč
3714,70 Kč
3070,00 Kč
644,70 Kč
3714,70 Kč
Thortabs
FB350-10
FB350-10
(81" Bandpass Filter, CWL = 350 * 2 ním, FWHM =
10 + Z nm, míin Transmission 25 %, blocking 200-
3000 nm OD >4.
120
125 mm interference notch
filter, center 808 nm
$25 mm interference notch fiiter, dimension 25 x 3,5 mm, center 808
nm, out of the notch transmission > 90 % for 400 -1550 nm, at 808 nmj
(notch) OD > 5, Typical Notch Bandwidth = 41 nm.
19 805,00 Kč
4 159,05 Kč
23 964,05 Kč
19 805,00 Kč
4 159,05 Kč
23 964,05 Kč
Semrock
NFO3-808E-
25
NFO03-808E-25
$25 mm interference notch filter, dimension 25 x
3,5 mm, center 808 nm, out of the notch
transmission > 90 % for 400 -1550 nm, at 808 nm
(notch) OD > 5, Typical Notch Bandwidth = 41 nm.
121
(825 mm interferance 266
nm lasar clean-up filter
(425 mm Interference 266 nm laser clsan-up filter, dimension 25 x 3,5
mm, FWHM of 2.4 nm (maximum), transmmission at 266 > 50 %.
14 297,00 Kč
3002,37 Kč
17 299,37 Kč
14 297,00 Kč
3002,37 kč
17 299,37 Kč
Semrock
LLO1-266-25
LLO1-266-25
$25 mm interference 266 nm laser clean-up filter,
dimension 25 x 3,5 mm, FWHM of 2.4 nm
(maximum), transmmission at 266 > 50 %.
122
$25 mm interference 266
nm locking edge long-pass
filter
$25 mm interference 266 nm locking edge long-pass filter, OD > 2
below 270 nm, OD > 3 below 267 nm, transmission above 275 nm >
90 %.
24 023,00 Kč
5 044,83 Kč
29 067,83 Kč
24 023,00 Kč
5044,83 Kč
29 067,83 Kč
Semrock
LPO2-266RU-
25
LPO2-266RU-25
625 mm interference 266 nm locking edge long-
pass filter, OD > 2 below 270 nm, OD > 3 below
267 nm, transmission above 275 nm > 90 %.
123
Kinematic Mount with
Vertical Drive, (625.4 mm
Kinematic Mount with Vertical Drive (all of the adjusters outside of th:
optical path), for hosting optic 25,4 mm, min 3 mm thkness, Totat
Angutar Range of £3*, 0.25* per Revolution Adjustment.
10
3 535,00 Kč
742,35 Kč
4 277,35 Kč
35 350,00 Kč
7 423,50 Kč
42 773,50 Kč
Thorlabs
'VM1/M
|VM1/M
Kinematic Mount with Vertical Drive (all of the
adjusters outside of the optical path), for hosting
optic 925.4 mm, min 3 mn thkness, Total Angular
Range of 13*, 0.25* per Revolution Adjustment.
124
1“ Low Drift Kinematic Mirror
mount
Low Drift Mirror Mount, 3 Adjusters for hosting A 1 inch optics, M4
taps for post mounting,tip/tilt 5/64" Balldriver driven , Less than 2
prad Deviation after Temperature Cycling.
10
3 192,00 Kč
670,32 Kč
3 862,32 Kč
31 920,00 Kč
6 703,20 Kč
38 623,20 Kč
Newport
SN100C-F3H
SN100C-F3H
Low Drift Mirror Mount, 3 Adjusters for hosting 9!
inch optics, M4 taps for post mounting,tip/tilt
5/64" Balldriver driven , Less than 2 rad
Deviation after Temperature Cycling.
125
2" Low Drift Kinematic Mirror]
mount
Low Drift Mirror Mount, 3 Adjusters for hosting G 2 inch optics, M4
taps for post mounting,tip/tlit 5/64" Balidriver driven , Less than 2
prad Deviation after Temperature Cycling.
10
5 222,00 Kč
1.096,62 Kč
6 318,62 Kč
52 220,00 Kč
10 966,20 Kč
63 186,20 Kč
Newport
SN200-F
Low Drift Mirror Mount, 3 Adjusters for hosting al
2 inch optics, M4 taps for post mounting,tip/tilt
5/64" Balldriver driven , Less than 2 urad
Deviatlon after Ternperature Cycling.
126
Low-Profile Compact
Kinematic Mirror Mount
Low-Profile Compact Kinematic Mirror Mount (max overall volume:
25.4 x 28.7 x 20.1 mm) for hosting © 1 inch optics, M4 taps for post
mounting,tip/tilt 5/64" Balidriver driven.
10
1132,00 Kč
237,72 Kč
1 369,72 Kč
11 320,00 Kč
2 377,20 Kč
13 697,20 Kč
Newport
M-P100-P-H
M-P100-P-H
Low-Profile Compact Kinematic Mirror Mount
(max overail volume: 25.4 x 28.7 x 20.1 mm) for
hosting Ó 1 inch optics, M4 taps for post
mounting,tip/tilt 5/64" Balldriver driven,
197
Hlah-Precislon Rotatlon
Mount with Polarizing Prism
Mount, Metric
$1" High-Precislon Rotation Mount with Polarizing Prism Mount,
Metrie, for 8 mm and 10 mm Potarizing Prisms, 360“ Continuous
Cogrse ,37* of M Driven Fina Rotation, Verniar
Seale with Two Resalutlon Optlons, 5 aremin resolutlan,
7 233,00 Kč
1518,93 Kč
8 751,93 Kč
28 932,00 Kč
6075,72 Kč
35 007,72 Kč
Thortabs
PRM1GL10/
M
larcmin resolution.
PRM1GL10/M
91" High-Precision Rotation Mount with
Polarizing Prism Mount, Metric, for 8 mm and 10
mm Potarizing Prisms, 360" Continuous Coarse
jon, £7* of A Driven Fine ,
Vernlar Scale with Two Resolutlon Optlons, 5
128
Lens Tube Mount for 15 mm
Mounted Potlarizing Prisms
($1" Lens Tube Mount for 15 mm Mounted Polarizing Prisms.
1416,00 Kč
297,36 Kč
1713,36 Kč
1416,00 Kč
297,36 Kč
1713,36 Kč
Thorlabs
SM1PM15
SM1PM15
1" Lens Tube Mount for 15 mm Mounted
Polarizing Prisms.
Lans Tube Mount for B or 10
mm Mounted Polarizing
Prisms
1" Lens Tube Mount for 8 mm and 10 mm Mountad Polarizing
Prisrns,
1 172,00 Kč
246,12 Kč
1418,12 Kč
3516,00 Kč
738,36 Kč
4 254,36 Kč
Thortabs
$M1PM10
S5M1PM10
1" Lens Tube Mount for 8 mm and 10mm
Mounted Polarizing Prisms.
130
Mount for rectangular optics
Kinematic Mount (+-4% adjustable tip/tilt) for hosting 2" (50.8 mm)
Tall R lar Optics of thick 3-10 mm.
3 192,00 Kč
670,32 Kč
3862,32Kč
12 768,00 Kč
2 681,28 Kč
15 449,28 Kč
Newport
CYM-2R
CYM-2R
Kinematic Mount (+-4% adjustable tip/tilt) for
hosting 2" (50.8 mm) Tall Rectangular Optics of
thickness 3-10 mm.
131
3" Precision Kinematic Mirror
mount
Pracislon Mirror Mount, 2 Adjusters for hosting 3 Inch optics, M4
taps for post mounting,tip/tilt 5/64" Balldriver driven, Angular
Adjustment +42 , 5.0 mrad/rev resolutlon.
4 771,00 Kč
1001,91 Kč
5 772,91 Kč
19 084,00 Kč
4 007,64 Kč
23 091,64 Kč
Newport
U300-A
U300-A
Precision Mirror Mount, 2 Adjusters for hosting
(63 Inch optics, M4 taps for post mounting,tip/tlit
5/64" Balidriver driven, Angular Adjustment 142,
5.0 mrad/rev resolution.
132
4" Precision Kinematic Mirror
mount
Precision Mirror Mount, 2 Adjusters for hosting (94 inch optics, M4
taps for post mounting,tip/tilt 5/64" Balldriver driven, Angular
Adjustment 142.
8 833,00 Kč
1854,93 Kč
10 687,93 Kč
17 666,00 Kč
3 709,86 Kč
21 375,86 Kč
Thorlabs
K54
Precision Mirror Mount, 2 Adjusters for hosting
94 inch optics, M4 taps for post mounting,tip/tilt
5/64" Balidriver driven, Angular Adjustment +42,
25 mm XYZ Transtation Stage|
25 mm XYZ Translation Stage with Standard Micrometers, M6 Taps,
| Resolution: 500 um Translation
per Revolution,
27 824,00 Kč
5 843,04 Kč
33 667,04 Kč
111 296,00 Kč
23372,16Kč
134 668,16 Kč
Newport
M-460P-XYZ
M-460P-XYZ
25 mm XYZ Translation Stage with Standard
Micrometars, M6 Taps, Resolution: 500 im
(Translation
per Revolution.
134
1" lens optics mount for
auick release
Optics Mount 1" with Ouick Rel A Carriage -
coupling (mount has a post mountated back plate to which a
removable mounting carriage for hosting (91 inch optics (suhc as
lense) can be icall led), Max Optic Thick 0.35" (8.9
mm), Repeatability 1 um.
1.116,00 Kč
234,36 Kč
1.350,36 Kč
33 480,00 Kč
7 030,80 Kč
40 510,80 Kč
(Thorlabs
KB1P/M
KB1P/M
Optics Mount 1" with Ouick Release Mounting
Carriage - magnetic coupling (mount has a post
mountated back plate to which a rermovable
mounting carriage for hosting 91 inch optics
(suhc as lense) can be magnetically coupled), Max
Optic Thickness 0.35" (8.9 mm), Repeatability 1
um.
195
magnetic base, top plate
top plate for kinematie base, 25 x 25 mm, M4 counterbore.
928,00 Kč
194,88 Kč
1 122,88 Kč
27 840,00 Kč
5 846,40 Kč
33 686,40 Kč
[Thorlabs
KBT25/M
KBT25/M
top plate for kinematic base, 25 x 25 mm, M4
counterbore.
136
spanner wrench for 1"
retaining rings
Spanner Wrenche for installing and adjusting retaining rings for O1"
Lens Tubes and Mounts.
580,00 Kč
121,80 Kč
701,80 Kč
1.160,00 Kč
243,60 Kč
1 403,60 Kč
Newport
LT10-WRA
£T10-WR
Spanner Wrenche for installing and adjusting
retaining rings for ($1" Lens Tubes and Mounts.
147
Right-Angie Clarmp for 1/2"
Posts
Rlght-Angie Clamp for 1/2" Posts, 5 mm Hex (lockable clamp for
two posts together perpendicularty).
267,00 Kč
56,07 Kč
323,07 Kč
5 340,00 Kč
1121,40 Kč
6461,40 Kč
Newport
CA-1
Right-Angle Clarmp for $1/2" Posts, 5 mm Hex
(lockable clamp for two posts h
perpendicularty).
138
Single Axis Translation Stage,
50mm
Translation Stages should provide 2" (50.8 mm) travel on axis and
feature a mounting surface of minimal diameter: 3.75 x 3.75" (95 x 95
mm) with 1/4"-20 (M6) tapped mounting holes, Angular Deviation <2
rad, Coarse Thread Pitch 18 TPI, Fine Adjustment Thread Pitch 100
TPI.
8 326,00 Kč
1 748,46 Kč
10 074,46 Kč
74 934,00 Kč
15 736,14 Kč
90 670,14 Kč
Thortabs
LTI/M
£T1/M
Translation Stages should provide 2" (50.8 mm)
travel on axis and feature a mounting surface of
minimal diameter: 3.75 x 3.75" (95 x 95 mm) with/
1/4"-20 (M6) tapped mounting holes, Angular
Deviation <2 mrad, Coarse Thread Pitch 18 TPI,
Fine Adjustment Thread Pitch 100 TPI.
139
adjustable mirror dalay line
mount kit
Adjustable Mirror Mount Kit for Optical Delay Line (two orthogonal
surfaces for mounting palr of standard mirrors (up to 2") Into a roof
structure, allowing an input optical beam to be reflected back, paratlef
to itself. wiht maximal deviation 30 arc sec.), mounteble directly vla a
hole bored for (M6) cap head.
3 192,00 Kč
670,32 Kč
3862,32 Kč
15 960,00 Kč
3 351,60 Kč
19 311,60 Kč
Newport
9848
9848
Adjustable Mirror Mount Kit for Optical Dalay Line;
(two orth | surfaces for ing pair of
Icounterbored for (M6) cap haad.
dard mirrors (up to 2") Into a roof structure,
allowing an input optical beam to be reflected
back, paratlel to itself,wiht maximal deviation 30
arc sec.), mounteble directly vla a centralized hold
140
5-Axis Kinematic Mount 91"
optics
5-Axis Kinematic Mount 91" optics, Five Axes of Lockable Adjustment
Pitch/Yaw: £4* at 8 mrad/rev, X and Y translation: 10.04" (1.0 mm) at
254.0 pm/rev, Z translation: 10.13" (£3.2 mm), SM1-Threaded (1.035"
40) Bore for O1" (25.4 mm) Optics up to 0.38" (9.5 mm) Thick, Two 88
(M4) Counterbores for Post Mounting.
5 395,00 Kč
1132,95 Kč
6527,95 Kč
21 580,00 Kč
4 531,80 Kč
26 111,80 Kč
[Thorlabs
KSX1
KSXx1
5-Axis Kinematic Mount 91" optics, Five Axes of
Lockable Adjustment: Pitch/Yaw: +4" at 8
mrad/rev, X and Y translation: +0.04" (£1.0 mm)
at 254.0 um/rev, Z translation: +0.13" (£3.2 mm),
SM1-Threaded (1.035"-40) Bore for $1" (25.4
mr) Optics up to 0.38" (9.5 mm) Thick, Two 88
(Ma) Counterbores for Post Mounting.
141
spectrometer 200-1080 nm
p „sp | range 200-1080 nrn, integration time 1 ms - 65
5, spectra! resolution <= 1.5 nm, fiber optic input, USB interface.
113 879,00 Kč
23 914,59 Kč
137 793,59 Kč
227 758,00 Kč
47 829,18 Kč
275 587,18 Kč
Ocean Optics
HR2000+ s
příslušenství
m
HR2000+ s příslušenstvím
spectrometer, spectral range 200-1080 nm,
integration time 1 ms - 65 s, spectral resolution <=
1.5 nm, fiber optic Input, USB Interface.
142
Plano-Concave Cylindrical
Lens f=-50
Plano-Concave Cylindrical Lens , f=-50 mm, H=30 mm, L=32 mm, N-
BK7 AR Coating: 650-1050 nm, Surface Flatness (Plano Side) A/2,
Spherical Surface Power (Concave Side) 3M/2, Surface Irregularity
(Peak to Valley) 4/4.
15 280,00 Kč
3 208,80 Kč
18 488,80 Kč
15 280,00 Kč
3 208,80 Kč
18 488,80 Kč
laser
Components
BBAR/BBAR-
D RCC32-30-
25.8C
BBAR/BBAR-D RCC32-30-25.8C
Plano-Concave Cylindrical Lens , f=-50 mm, H=30
mmm, L=32 mm, N-BK7 AR Coating: 650-1050 nm,
Surface Flatness (Plano Side) A/2, Spherical
Surface Power (Concave Side) 3A/2, Surface
Irregularity (Peak to Valley) A/4.
15
Plano-Convex Cylindrical
Lens f=100
Plano-Canvex Cyilndricat Lens, f = 100,00 mra, H = 30.00 mm, L= 32,0
mm, N-BK7 AR Coating: 650-1050 nm, Surface Flatness (Plano Skle)
M2, Spharical Surface Powar (Convex Side) 3A/2, Surface Irregularity
(Peak to Vallay) A/4.
15 280,00 Kč
3 208,80 Kč
18 488,80 Kč
15 280,00 Kč
3 208,80 Kč
18 488,80 Kč
Laser
Components
BBAR/BBAR-
D RCX32-30-
51.5C
BBAR/BBAR-D RCX32-30-51.5C
Plano-Convex Cylindrical Lens, f= 100.00 mm, H=i
30.00 mm, L = 32.0 mm, N-BK7 AR Coating: 650-
1050 nm, Surface Flatness (Plano Side) 4/2,
Spherical Surface Power (Convex Side) 3A/2,
Surface Irregularity (Peak to Valley) A/4.
144
lens achromatic f=100mm
unrmounted achromatic dublets (lense), 925.4 mm, Design
Wavelengths 706.5 nm, 855 nm, and 1015 nm,AR coating for 650-
1050 nm (les than 0.5% reflectance), f=100 mm, focal length shift in
650-1050 nm range < 0.3 mm.
1988,00 Kč
417,48 Kč
2 405,48 Kč
1988,00 Kč
417,48 Kč
2.405,48 Kč
(Thorlabs
AC254-100-B
AC254-100-8
unmounted achrornatic dublets (lense), 25.4
mm, Design Wavelengths 706.5 nm, 855 nm, and
1015 nm,AR coating for 650-1050 nm (les than
0.5% reflectance), f=100 mm, focal length shift in
650-1050 nm range < 0.3 mm.
145
lens achromatie fe200mm
dact dublets (lense), 925,4 mm, Design
Wavelangths 706,5 nm, 855 nm, and 1015 nm,AR coating for 650-
1050 nm (les than 0,5 % reflectance), f=200 mm, focal length shift in
650-1050 nm range < 0,3 mm.
1988,00 Kč
417,48 Kč
2405,48 kč
1.988,00 Kč
417,48 Kč
2 405,48 Kč
[Thoriabs
AC254-200-B8
AC254-200-B8
unmounted achromatic dublets (lense), 025.4
mm, Design Wavelengths 706.5 nm, 855 nm, and
1015 nm,AR coating for 650-1050 nm [les than
0.5 % reflactance), f=200 mm, focal length shift in!
650-1050 nm range < 0.3 mm.
146
SM1-Mounted Achromatic
Half-Wave Plate
($1" Zero-Order Half-Wave Plate, 808 nm, Bearn Deviatlon <10 arcsec,
Surface Ouality 20-10 SD, SM1-Threaded Mount.
11 932,00 Kč
2 505,72 Kč
14 437,72 Kč
11 932,00 Kč
2 505,72 Kč
14 437,72 Kč
(Thorlabs
WPH10M-
808
WPH10M-808
1" Zero-Order Half-Wave Plate, 808 nm, Beam
Deviation <10 arcsec, Surface Ouality 20-10 SD,
SM1-Threaded Mount.
147
Off-Axis Parabolic Mirror,
Protected Sliver fa“
|Off-axis parabolic mirror, 2 Inch di: „P d Silver, refk d
focal length 4", off-axis angle 90 deg, surface flatness A/4, surface
guality 40-20 scratch-dig, damage threshokd 0.3 j/cm2 at 355 nm, 10
ns, 10 Hz.
7 907,00 Kč
1660,47 Kč
9 567,47 Kč
7 907,00 kč
1660,47 Kč
9 567,47 Kč
[Thorlabs
MPD249-P01
MPD249-P01
Off-axis parabolic mirror, 2 Inch diameter,
Protected Sliver, reflected focal length 4", off-axis!
angle 90 deg, surface flatness A/4, surface auality
40-20 scratch-dig, damage threshold 0.3 J/em2 at:
355 nm, 10 ns, 10 Hz.
148
Off-Axis Parabolic Mirror,
Protected Silver f=6"
Off-axis parabolic mirror, 2 inch di „Pr d Silver, refli d
focal length 6", off-axis angle 90 deg, surface flatness A/4, surface
guality 40-20 scratch-dig, damage threshold 0.3 J/cm2 at 355 nm, 10
ns, 10 Hz.
7 907,00 Kč
1660,47 Kč
9 567,47 Kč
15 814,00 Kč
3 320,94 Kč
19 134,94 Kč
|Thortabs
MPD269-P01
MPD269-P01
Off-axis parabolic mirror, 2 inch diameter,
Protected Silver, reflected focal length 6", off-axisi
angle 90 deg, surface flatness A/4, surface guality
40-20 scratch-dig, damage threshold 0.3 J/cm2 at
355 nm, 10 ns, 10 Hz.
jaa
pyroeletrie datactor
p lactri,
Pyr for the appl In the range from 10 um to
8000 um [freguwency 0.1 - 30 THz); Effective aperture: min, 5 mm
dlameter, Max. measurabile power 140W.
28 560,00 Kč
5 997,60 Kč
34 557,60 Kč
28 560,00 Kč
5 997,60 Kč
34 557,60 Kč
Laser
Components
THZ51-BL-BNC]
THZ51-BL-BNC
Pyroelectric for the appii in the
range from 10 pin to 3000 um (freguency 0.1 - 30
THz); Effective aperture: min. 5 mm diameter,
Max. measurable power 140 pW.
lens achromatic f=75mm
unmounted achromatic dublets (lense), (950.8 mm, Design
Wavelengths 706.5 nm, 855 nm, ancdi 1015 nm,AR coating for 650-
1050 nm (les than 0.5 % reflectance), f=75 mm, focal length shift in
650-1050 nn range < 0.3 mm.
3.000,00 Kč
630,00 Kč
3 630,00 Kč
3.000,00 Kč
630,00 Kč
3 630,00 Kč
Thortabs
AC508-075-B
AC508-075-B
unmounted achromatic dublets (lense), (950.8
mm, Design Wavelengths 706.5 nm, 855 nm, and
1015 nm,AR coating for 650-1050 nm (les than
0.5% reflectance), f=75 mm, focal length shift in
650-1050 nm range < 0.3 mm.
151
Plano-Concave Cylindrical
Lans f=150
Plano-Concave Cylindrical Lens , f=150 mm, H=100 mm, L=90 mm, N-
BK7 AR Costing: 650-1050 nm, Surface Flatness (Plano Side) A/2,
Spherical Surface Power (Concave Side) 3A/2, Surface Irregularity
(Paak to Valley) A/4.
23 962,00 Kč
5032,02Kč
28 994,02 Kč
23 962,00 Kč
5032,02Kč
28 994,02 Kč
Laser
Components
BBAR/BBAR
D RCC90-100-|
71.3C
BBAR/BBAR-D RCC90-100-77.3C
Plano-Concave Cylindrical Lens , f=150 mm,
H=100 mm, L=90 mm, N-BK7 AR Coating: 650-
1050 nm, Surface Flatness (Plano Sice) A/2,
Spherical Surface Power (Concave Side) 33/2,
Surface Irregutarity (Peak to Vallay) A/4.
152
Plano-Concave Cylindrical
Lens f=300
Plano-Concave Cylindrical Lens , f=300 mm, H=60 mm, L=62 mm, N-
BK7 AR Coating: 650-1050 nm, Surface Flatness (Plano Side) A/2,
Spherical Surface Power (Concave Side) 3A/2, Surface Irregularity
(Peak to Valley) A/4.
26 532,00 Kč
5571,72Kč
32 103,72 Kč
26 532,00 Kč
5571,72Kč
32 103,72 Kč
laser
Components
BBAR/BBAR-
D RCC62-60-
154.4C
BBAR/BBAR-D RCC62-60-154.4C
Plano-Concave Cylindrical Lens , f=300 mm, H=60
mm, L=62 mm, N-BK7 AR Coating: 650-1050 nm,
Surface Flatness (Plano Side) A/2, Spherical
Surface Power (Concave Side) 3/2, Surface
Irregularity (Peak to Valley) 4/4,
klnematic prism mount
Kinematic Prism Mount, For mounting of prism min. 20 x 20 x 10 mm,
24" of Fine Tip and Tilt Control, 8 mrad Adjustment per Revolution,
Mounting Platform with M4 tapped holes,
1811,00 Kč
380,31 Kč
2191,31Kč
1811,00 Kč
380,31 Kč
2191,31 Kč
Thortabs
KM100PM/M
KM100PM/M
Kinematic Prism Mount, For mounting of prism
min. 20 x 20 x 10 mrn, +4" of Fine Tip and Tilt
Control, 8 mrad Adjustment per Revolution,
Mounting Platform with M4 tapped holes.
arm for prism mount
Clamping Arm, M4 Threaded Post, A: optics up to 40.9
mm, 29.3 mm center-to-center distance between the post and the
nylon-tipped setscrew.
510,00 Kč
107,10 Kč
617,10 Kč
510,00 Kč
107,10 Kč
617,10 Kč
Thorlabs
PMa/M
PM4/M
Clamping Arm, M4 Threaded Post,
Accommodates optics up to 40.9 mm, 29.3 mm
center-to-center distance between the post and
the nylon-tipped setscrew.
458
klnematic prating mount
Compatible with 81" Mirror Mounts, Kinematic Grating Mount
Adapter, Grating Helght: 20-40 mm
Aceommodates Gratings up to 60 mm Tall
Spring-Loaded Clamping Design
Top-Locatad Loeking Satserew,
3 000,00 Kč
630,00 Kč
3 630,00 Kč
3 000,00 Kč
630,00 Kč
3 630,00 Kč
(Thorlabs
KGM40
KGM40
Compatible with A1" Mirror Mounts, Kinernatic
Grating Mount Adapter, Grating Helght: 20-40
mm
Accommodates Gratings up to 60 mm Tall
Spring-Loaded Clamping Design
Top-Located Locking Setscrew.
156
1" Low Drift Kinematic Mirror;
mount
Low Drift Mirror Mount, 3 Adjusters for hosting Ó 1 inch optics, M4
taps for post mounting,tip/tilt 5/64" Balldriver driven , Less than 2
prad Deviation after Temperature Cycling.
3 192,00 Kč
670,32 Kč
3 862,32 Kč
3 192,00 Kč
670,32 Kč
3862,32Kč
Newport
SN100C-F3H
SN100C-F3H
Low Drift Mirror Mount, 3 Adjusters for hosting (|
1 inch optics, M4 taps for post mounting,tip/tilt
5/64" Balldriver driven , Less than 2 prad
Deviation after Temperature Cycling.
157
Fixed Cylindrical Lens Mount
Fixed Cylindrical Lens Mount, Two rubbar-lined arms mount for a
cytindricat lens for the optic height ranga of O mm to 66.0 mm.
1484,00 Kč
311,64 Kč
1 795,64 Kč
4 452,00 Kč
934,92 Kč
5 386,92 Kč
Thortabs
'CH2B
CH2B
Fixed Cylindrical Lens Mount, Two rubber-lined
arms mount for a cylindrical lens for the optic
height range of 0 mm to 66.0 mm.
Kinematic Rotation Mount
for D1" Optics
Kinematic rotation rnount with k angular adj and
rotation in one mount, 1/4"-80 lockable adfusters for £4* of angular
adjustment, engraved rotation scale with 2* graduations, 360"
rotation, SM1-Threaded Rotation Ring with Locking Screw.
5 774,00 Kč
1212,54 Kč
6 986,54 Kč
11 548,00 Kč
2425,08 Kč
13 973,08 Kč
Newport
M1-1PR
M1-1PR
Kinematic rotation mount with kinematic angular
adjustment and rotation in one mount, 1/4"-80
lockable adjusters for +4“ of angular adjustment,
E d scale with 2“ praduati 360"
rotation, SM1-Threaded Rotation Ring with
Locking Screw.
2" Precision Kinematie Mirror
mount
Precision Mirror Mount, 2 Adjusters for hosting (92 Inch optics, M4
taps far post mounting,tip/tilt 5/64" Balidriver driven, Angular
Adjustment i42,
3 859,00 Kč
810,39 Kč
4 669,39 Kč
19 295,00 Kč
4 051,95 kč
23 346,95 Kč
Newport
U200-A2H
U200-A2H
Pracision Mirror Mount, 2 Adjusters for hosting
(92 inch optics, M4 taps for post mounting,tip/tilt
5/64" Balkdriver driven, Angular Adj 240.
160
Lens Mount with Retaining
Ring
Fixed lens mount for 2" optics, M4 tapped, Includes Compatible
Retaining Ring.
609,00 Kč
127,89 Kč
736,89 Kč
609,00 Kč
127,89 Kč
736,89 Kč
Newport
M-LH-2A
M-1H-2A
Fixed lens mount for 2" optics, M4 tapped,
Includes Compatible Retaining Ring.
161
Wolfasten Prism
1" Wollastan Prism, 20" at 633 nm Beam Separation, 650-1050 nm AR
Coating, diameter 22,6 mm, Transmitted Wavafrant Error <A/4 at
632,B nm, Surface Ouality 20-10 SD,
14 391,00 Kč
3 022,11 Kč
17 413,11 Kč
4 391,00 Kč
3022,11 Kč
17 413,11 Kč
Newport
10WLPOB8AR.
16
10WLPOBAR.16
1" Wollaston Prism, 20“ at 633 nm Beam
Separation, 650-1050 nm AR Coating, dlameter
22,6 mm, Transmitted Wavefront Error <A/4 at
632.8 nm, Surface Ouality 20-10 SD,
162
1" Zero-Order Ouarter-Wave
Plate
$1" Zero-Order Ouarter-Wave Plate, 808 nm, Beam Deviation <10
arcsec, Surface Ouality 20-10 SD, SM1-Threaded Mount.
11 698,00 Kč
2 456,58 Kč
14 154,58 Kč
11 698,00 Kč
2 456,58 Kč
14 154,58 Kč
(Thorlabs
WPO10M-
808
WPO10M-808
©1" Zero-Order Ouarter-Wave Plate, 808 nm,
Beam Deviation <10 arcsec, Surface Ouality 20-1.
SD, SM1-Threaded Mount.
163
preampiified Si-Photodlode
Switchable Gain Detector, 350-1100 nm, Peak
Response 0.65 A/W
© 970 nm, Bandwidth Range DC - 10 MHz, Active Area 13 mm2, Gain
8 x 10 dB Steps, 230 VAC,
7 302,00 Kč
1533,42 Kč
8 835,42 Kč
14 604,00 Kč
3 066,84 Kč
17 670,84 Kč
Thorlabs
PDA36A-EC
PDA36A-EC
Switchable Galn Detector, 350-1100 nm, Peak
Response 0,65 A/W
© 970 nm, Bandwidth Range DC - 10 MHz, Activa:
Area 13 mm2, Gain 8 x 10 dB Steps, 230 VAC,
164
Large-Area Balanced
Amplified Photodetectors
Large-Area Balanced Photodetector (pair of sensors acts as a balanced
receiver by subtracting the two optical input signals from each other),
Si, 320-1060 nm, M4 Taps, Common Mode Rejection Ratioz 30 dB,
responsivity 0.6 A/W © 920 nm, active detector diameter 5 mm,
included +12 V DC power supply for 230/115 V AC.
22 256,00 Kč
4 673,76 Kč
26 929,76 Kč
22 256,00 Kč
4 673,76 Kč
26 929,76 Kč
(Thortabs
PDB210A/M
PDB210A/M
Large-Area Balanced Photodetector (pair of
acts as a bal d receiver by sub el
the two optical input signals from each other), Si,
320-1060 nm, M4 Taps, Common Mode Rejectioni
Ratio z 30 dB, responsivity 0.6 A/W © 920 nm,
active di dik 5 mm, included +12 V
DC power supply for 230/115 V AC,
165
A" silver mirror
2" (A50.8 mrn) Protected Silver Mirror, 0.47" (12.0 mm) Thick with
Avaraga Reflectance > 97,5 % for 450 nm - 2 pm, Surface Flatness A/10
© 633 nm, Parallalism <3 aremin, Damage Threshold 3 J/cm2 © 1064
nm, 10 ns, 10 Hz, $1.000 mm, Surface Ouality 40-20 Scratch-Dig.
2 147,00 Kč
450,87 Kč
2 597,87 Kč
8 588,00 Kč
1.803,48 Kč
10 391,48 Kč
Newport
20D620ER.2
20D620ER.2
©2" (450.8 mmm) Protected Silver Mirror, 0.47"
(12.0 mrn) Thick with Average Reflectance > 97.5
% for 450 nm - 2 im, Surface Flatness A/10 © 633
nm, Paraitelism <3 arcmin, Damage Threshoki 3
4/cm2 © 1064 nm, 10 ns, 10 Hz, 1.000 mm,
Surface Ouality 40-20 Seratch-Díg.
166
Iris 0-25mrn
Mounted Zero Aperture Iris, 25.0 mm Max Aperture, Metric , 75 mm
post.
1. 598,00 Kč
335,58 Kč
1 933,58 Kč
1598,00 Kč
335,58 Kč
1933,58 Kč
Thortabs
10252/M
1D252/M
Mounted Zero Aperture Iris, 25.0 mm Max
Aperture, Metric, 75 mm post.
167
Mount for guartar plate
Continuous Rotation Mount for 91" Optics with Adjustable Zero,
R | Position Lockable vla , M4 tapped hole, Internal
SM1 thraad.
6 233,00 Kč
1 308,93 Kč
7 541,93 Kč
12 465,00 Kč
2617,86Kč
15 083,86 Kč
(Thortabs
PRM1/M
PRM1/M
Continuous Rotation Mount for $1" Optics with
A ble Zero, R | Position Lockable via
Setscrew, M4 tapped hole, Internal SM1 thread.
168
1.00" lens tube for prism
($1" Stackable Lens Tube, SM1 External Thread, SM1 internal thread,
1.00" Internal Thread Depth, One Retaining Ring Included, 1.15 in
(29.2 mm) length.
366,00 Kč
76,86 Kč
442,86 Kč
366,00 Kč
76,86 Kč
442,86 Kč
Newport
UT10-10
£T10-10
91" Stackable Lens Tube, SM1 External Thread,
5M1 internal thread, 1.00" Internal Thread Depth,
One Retaining Ring included, 1.15 in (29.2 mm)
length.
169
Cage-Cube-Mountad Polarizing Beamsplitter Cube, 620-1000 nm,
Cage-Cuba-M
Polarizing Bearmspiitter Cube
Ti d Ext Ratlo: Tp:Ts > 1,000:1 Transmission Efficiency:
(Tp > 90 % Reflection Efficiency: Rs > 99.5 % Four SM1-Threaded Ports
4-40 Tappad Holes for 30 mm Cage.
6 950,00 Kč
1459,50 Kč
8 409,50 Kč
6 950,00 Kč
1459,50 Kč
8 409,50 Kč
Thoriabs
ccM1-
PBS252/M
CCM1-PBS252/M
Cage-Cube-Mounted Polarizing Beamsplitter
Cube, 620-1000 nm, Transmitted Extinction Ratio:
(Tp:Ts > 1,000:1 Transmnission Efficiency: Tp > 90 %|
Reflection Efficiency: Rs > 99.5 % Four SM1-
(Threaded Ports
4-40 Tapped Holes for 30 mm Cage.
170
1" periscope
periscope bly to redi and change the height of a
bearn within an optical system for 1" (925.4 mm) optics, 360"
rotation with £4" tip and tilt, 150 mm pilar post.
6 488,00 Kč
1 362,48 Kč
7 850,48 Kč
6 488,00 Kč
1 362,48 Kč
7 850,48 Kč
Thorlabs
RS99/M
RS99/M
complete periscope assembly to redirect and
change the height of a beam within an optical
system for 1" (025.4 mm) optics, 360"
continuous rotation with 14“ tip and tilt, 150 mm
pilar post.
17
Frae-Space Optieal Delay Line|
Kig, 100 mm Travel, Metric
Frea-Space Optical Delay Líne Kit, Maximum Optical Delay, Delay Step;
as Short as 3,3 fs aver a 666,6 ps Range with Pre-Aligned V-Block with
Kinematlo Adjustars and Iris Slots, 100 mm traval ranga translation
stage, two Irlses, periscopa assembiy for input Beam Helght 61,0 mm
152.4 mm.
117 443,00 Kč
24 663,03 Kč
142 106,03 Kč
117 443,00 Kč
24 663,03 Kč
142 106,03 Kč
Thorlabs
ODL100-
FS/M
[assembly for Input Bearn Height 61.0 mm - 152.4
ODL100-F5/M
Frae-Space Optical Delay Line Kit, Maximum
Optical Delay, Delay Steps as Short as 3.3 fs over 4
666.6 ps Range with Pre-Alignad V-Block with
Kinematic Adjusters and Iris Slots, 100 mm travel
range translation stage, two irises, periscope
mm.
Ultralight High-Siffness
Breadboard M6 Tapped Holes on 25 mm Centers.
Optical Breadboard 900 x 900 x 25 mm, M6 Taps Max. weight 37 kg,
172 Flatness 40.15 mm (+0.006") Over Any 0.3 m2, Threads and facing:
29 303,00 Kč
6153,63Kč
35 456,63 Kč
29 303,00 Kč
6 153,63 Kč
35 456,63 Kč
Thortabs
PBG51512
PBG51512
Optical Breadboard 900 x 900 x 25 mm, M6
Taps Max. weight 37 kg, Fatness +0.15 mm
(£0.006") Over Any 0.3 m2, Threads and pacing:
M6 Tapped Holes on 25 mm Centers.
Platchal přsdkmáskky jsoa uvolony v sávrim Kupzí azlouvy, ktexý je mamčántí této nabídky
Cekodní podmísky
Obchodní podesisky jsou nwdeny v návrhu Kupní smlouvy, kicrý je součástí této zmbídky.
Prohlájení me meče
Udhracč MIT spal. s zo. nc skdilcm Klámova 56, 147 00 Pin 4, p
je vlnám crlým obasbore sabášky po cziou dobu běku zadávací Tity.
V Banze dne: 4.8.2016 Merta Maner
Šeinatci MIT, spol. s x.